ページ1に含まれる内容の要旨
®
MULTITASKER
MANUAL PART NUMBER: 400-0372-005
MT107-303
8-OUT, TWISTED PAIR, SINGLE CHANNEL
OUTPUT CARD FOR MATRIX SWITCHER
USER’S GUIDE
ページ2に含まれる内容の要旨
MULTITASKER TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS................ 2 GENERAL..........................................................2 INSTALLATION..................................................2 CLEANING.........................................................2 FCC NOTICE .....................................................2 ABOUT YOUR MT107-303....................................... 3 TECHNICAL SPECIFICATIONS.............................. 3 PRODUCT DESCRIPTION ..............
ページ3に含まれる内容の要旨
MULTITASKER • This equipment has been tested and found to PRECAUTIONS / SAFETY WARNINGS 1 comply with the limits for a Class A digital device Please read this manual carefully before using your pursuant to Part 15 of the FCC Rules. These MT107-303. Keep this manual handy for future limits are designed to provide reasonable reference. These safety instructions are to ensure protection against harmful interference when the the long life of your MT107-303 and to prevent fire equipment is o
ページ4に含まれる内容の要旨
MULTITASKER ABOUT YOUR MT107-303 2 TECHNICAL SPECIFICATIONS 3 Specifications are subject to change. MT107-303 See www.altinex.com for up-to-date information. 8-Out, Twisted Pair, Single Channel FEATURES/ MT107-303 The MT107-303 is an 8 Output expansion card for DESCRIPTION use with the MT107-104 64X64 Matrix Engine. The GENERAL MT107-303 outputs are single channel differential Input outputs for use over long cable lengths. The Twisted Pair Internal Box Header (1) Twisted Pair signals from th
ページ5に含まれる内容の要旨
MULTITASKER ELECTRICAL MT107-303 Output Video/Sync/Audio Signals Twisted Pair ALTINEX Standard Analog Signal Level 1.5 Vp-p max. Input Bus from Matrix Engine 0 dB gain Power Consumption (from enclosure) +6V 0.225 A (1.3 W) -6V 0.190 A (1.1 W) Total Power 2.4 W max. Table 3. MT107-303 Electrical 400-0372-005 4
ページ6に含まれる内容の要旨
MULTITASKER PRODUCT DESCRIPTION 4 8 1TP OUTPUTS BOTTOM RETAINER SCREW 400-0372-005 5
ページ7に含まれる内容の要旨
DA1931CT MS8704TP MS8704TP DA1931CT MULTITASKER APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP MT107-303 400-0372-005 6
ページ8に含まれる内容の要旨
MULTITASKER DIAGRAM 2: INTERNAL VIEW POWER IN1 OUT1 IN2 OUT2 IN3 OUT3 IN4 OUT4 INPUT TWISTED 40-PIN PAIR IDC RJ-45 IN5 OUT5 IN6 OUT6 IN7 OUT7 IN8 OUT8 SIGNAL DETECT 400-0372-005 7
ページ9に含まれる内容の要旨
MULTITASKER INSTALLING YOUR MT107-303 6 OPERATION 7 Step 1. Turn off power to the MultiTasker 7.1 RS-232 CONTROL enclosure and remove the input AC power The MT107-303 has many advanced cord. remote-control capabilities as part of an Step 2. Locate the MT107-104 currently installed MT107-104 Matrix Switcher. These capabilities in the MultiTasker. Verify there is an are accessible through standard RS-232 empty slot in the enclosure for the new communication. The actual controlling can be
ページ10に含まれる内容の要旨
MULTITASKER Cause 3: The path is not selected. ALTINEX POLICIES 9 Solution: Make sure the input to output path is 9.1 LIMITED WARRANTY/RETURN POLICIES correctly selected. Please see the ALTINEX website at For example, Input 2 is connected to www.altinex.com for details on warranty and Output 1 in the Matrix Engine status. return policies. Physically, the source signal should 9.2 CONTACT INFORMATION be connected to Input 2 and the display cable should be connected ALTINEX, Inc. to Outp
