ページ1に含まれる内容の要旨
AT-9400 Series
Gigabit Ethernet
Switches
Layer 2+ AT-9408LC/SP
AT-9424T/GB
AT-9424T/SP
Basic Layer 3 AT-9424T
AT-9424T/POE
AT-9424Ts
AT-9424Ts/XP
AT-9448T/SP
AT-9448Ts/XP
◆
Installation Guide
613-000987 Rev. A
ページ2に含まれる内容の要旨
Copyright © 2007 Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc. Allied Telesis is a registered trademark of Allied Telesis, Incorporated. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Telesis, Inc. reserves the right to make changes in specifications and other information contained in
ページ3に含まれる内容の要旨
Electrical Safety and Emissions Standards This product meets the following standards. U.S. Federal Communications Commission Radiated Energy Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy a
ページ4に含まれる内容の要旨
Translated Safety Statements Important: The indicates that a translation of the safety statement is available in a PDF document titled “Translated Safety Statements” (613-000990) posted on the Allied Telesis website at www.alliedtelesis.com. This document is also included with the documentation CD that is shipped with the product. 4
ページ5に含まれる内容の要旨
Contents Preface ..................................................................................................................................................................................7 Product Documentation ..........................................................................................................................................................8 Where to Go First ...........................................................................................................
ページ6に含まれる内容の要旨
Contents Power Budgeting ...........................................................................................................................................................41 Implementation ..............................................................................................................................................................42 AT-RPS3204 Redundant Power Supply............................................................................................................
ページ7に含まれる内容の要旨
Preface This guide contains the installation instructions for the AT-9400 Layer 2+ and Basic Layer 3 Gigabit Ethernet Switches. This preface contains the following sections: “Product Documentation” on page 8 “Where to Go First” on page 9 “Starting a Management Session” on page 10 “Safety Symbols Used in this Document” on page 11 “Where to Find Web-based Guides” on page 12 “Contacting Allied Telesis” on page 13 7
ページ8に含まれる内容の要旨
Preface Product Documentation For overview information on the features of the AT-9400 Switch and the AT-S63 Management Software, refer to: AT-S63 Management Software Features Guide (PN 613-000801) For instructions on starting a local or remote management session, refer to: Starting an AT-S63 Management Session Guide (PN 613-000817) For instructions on installing or managing stand-alone switches, refer to: AT-S63 Management Software Menus Interface User’s Guide (PN 613-50570-00) AT-S63 Manag
ページ9に含まれる内容の要旨
AT-9400 Series Gigabit Ethernet Switches Installation Guide Where to Go First Allied Telesis recommends that you read Chapter 1, Overview, in the AT-S63 Management Software Features Guide before you begin to manage the switch for the first time. There you will find a variety of basic information about the unit and the management software, like the two levels of manager access levels and the different types of management sessions. The AT-S63 Management Software Features Guide is also your re
ページ10に含まれる内容の要旨
Preface Starting a Management Session For instructions on how to start a local or remote management session on the AT-9400 Switch, refer to the Starting an AT-S63 Management Session Guide. 10
ページ11に含まれる内容の要旨
AT-9400 Series Gigabit Ethernet Switches Installation Guide Safety Symbols Used in this Document This document uses the safety symbols defined in Table 1. Table 1. Safety Symbols Symbol Meaning Description Caution Performing or omitting a specific action may result in equipment damage or loss of data. Warning Performing or omitting a specific action may result in electrical shock. 11
ページ12に含まれる内容の要旨
Preface Where to Find Web-based Guides The installation and user guides for all Allied Telesis products are available in portable document format (PDF) on our web site at www.alliedtelesis.com. You can view the documents online or download them onto a local workstation or server. 12
ページ13に含まれる内容の要旨
AT-9400 Series Gigabit Ethernet Switches Installation Guide Contacting Allied Telesis This section provides Allied Telesis contact information for technical support as well as sales or corporate information. Online Support You can request technical support online by accessing the Allied Telesis Knowledge Base from the following web site: www.alliedtelesis.com/support. You can use the Knowledge Base to submit questions to our technical support staff and review answers to previously asked qu
ページ14に含まれる内容の要旨
Preface 14
ページ15に含まれる内容の要旨
Chapter 1 Overview The AT-9400 Switches are managed Gigabit Ethernet switches for Ethernet, Fast Ethernet, and Gigabit Ethernet networks. The AT-9400 Switches are divided into two groups: Layer 2+ Switches – AT-9408LC/SP – AT-9424T/GB – AT-9424T/SP Basic Layer 3 Switches – AT-9424T – AT-9424T/POE – AT-9424Ts – AT-9424Ts/XP – AT-9448T/SP – AT-9448Ts/XP The differences between the two groups are explained in the AT-S63 Management Software Features Guide. This chapter has the following sectio
ページ16に含まれる内容の要旨
Chapter 1: Overview “Power Over Ethernet” on page 41 “AT-RPS3204 Redundant Power Supply” on page 43 “AC Power Connector” on page 44 16
ページ17に含まれる内容の要旨
AT-9400 Series Gigabit Ethernet Switches Installation Guide Descriptions The following sections describe the AT-9400 Switches. AT-9408LC/SP The AT-9408LC/SP Layer 2+ Switch has the following hardware features: Switch Eight 1000Base-SX fiber optic ports with LC-duplex connectors Four small form-factor pluggable (SFP) transceiver slots An RJ-45 style serial terminal port for local (out-of-band) management Status LEDs for the ports, SFP transceiver slots, and system Redundant power supply (RPS
ページ18に含まれる内容の要旨
Chapter 1: Overview AT-9424T/GB The AT-9424T/GB Layer 2+ Switch has the following hardware features: Switch 24 10/100/1000Base-T ports Two gigabit interface connector (GBIC) transceiver slots An RJ-45 style serial terminal port for local (out-of-band) management Status LEDs for the ports, transceiver slots, and system Redundant power supply connector Figure 2 shows the front and back panels of the AT-9424T/GB Switch. Port and Transceiver System Slot LEDs 10/100/1000Base-T Ports LEDs 13579 1
ページ19に含まれる内容の要旨
AT-9400 Series Gigabit Ethernet Switches Installation Guide AT-9424T/SP The hardware features of the AT-9424T/SP Layer 2+ Switch include: Switch 24 10/100/1000Base-T ports Two Gigabit Ethernet small form-factor pluggable (SFP) transceiver slots An RJ-45 style serial terminal port for local (out-of-band) management Status LEDs for the ports, transceiver slots, and system Redundant power supply connector Figure 3 shows the front and back panels of the AT-9424T/SP Switch. Port and SFP System
ページ20に含まれる内容の要旨
Chapter 1: Overview AT-9424T Switch The AT-9424T Basic Layer 3 Switch has these hardware features: 24 10/100/1000Base-T ports Four Gigabit Ethernet small form-factor pluggable (SFP) transceiver slots An RJ-45 style serial terminal port for local (out-of-band) management Status LEDs for the ports, transceiver slots, and system Figure 6 shows the front and back panels of the AT-9424T Switch. System Port and SFP 10/100/1000Base-T Ports LEDs Slot LEDs AT-9424T Gigabit Ethernet Switch 1 3 5 7 9