ページ1に含まれる内容の要旨
8100S Series
Fast Ethernet Switches
AT-8100S/24C
AT-8100S/24
AT-8100S/24POE
AT-8100S/16F8-SC
AT-8100S/16F8-LC
AT-8100S/24F-LC
Stack Installation Guide
613-001478 Rev. D
ページ2に含まれる内容の要旨
Copyright 2012 Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc. Allied Telesis and the Allied Telesis logo are trademarks of Allied Telesis, Incorporated. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Telesis, Inc. reserves the right to make changes in specifications and other informa
ページ3に含まれる内容の要旨
Electrical Safety and Emissions Standards This product meets the following standards. U.S. Federal Communications Commission Radiated Energy Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy a
ページ4に含まれる内容の要旨
Translated Safety Statements Important: The indicates that translations of the safety statement are available in the PDF document “Translated Safety Statements” posted on the Allied Telesis website at www.alliedtelesis.com. 4
ページ5に含まれる内容の要旨
Contents Preface .............................................................................................................................................................................. 13 Document Conventions .......................................................................................................................................................14 Contacting Allied Telesis ........................................................................................................
ページ6に含まれる内容の要旨
Contents Power Budget .............................................................................................................................................................. 36 Port Prioritization ......................................................................................................................................................... 37 Wiring Implementation......................................................................................................................
ページ7に含まれる内容の要旨
Stack Installation Guide for 8100S Series Switches SNMP .........................................................................................................................................................................112 Specifying Ports in the Command Line Interface for Switches in a Stack..................................................................112 Chapter 8: Troubleshooting ........................................................................................................
ページ8に含まれる内容の要旨
Contents 8
ページ9に含まれる内容の要旨
Figures Figure 1: 8100S Series Switches..........................................................................................................................................22 Figure 2: Front Panel Components on the 8100S Twisted Pair Switches............................................................................22 Figure 3: Front Panels of the 8100S Fiber Optic Series.......................................................................................................24 Figure 4: Fron
ページ10に含まれる内容の要旨
Figures Figure 50: PORT Parameter in the Command Line Interface.............................................................................................112 Figure 51: SHOW BOOT Command...................................................................................................................................121 Figure 52: Removing the Network Cables ..........................................................................................................................122 Figure 53: R
ページ11に含まれる内容の要旨
Tables Table 1: Hardware Features of the 8100S Twisted Pair Series ...........................................................................................21 Table 2: Hardware Features of the 8100S Fiber Optic Series .............................................................................................23 Table 3: General Specifications of the Fiber Optic Ports .....................................................................................................25 Table 4: Model Naming C
ページ12に含まれる内容の要旨
Tables 12
ページ13に含まれる内容の要旨
Preface This guide contains instructions on how to install the 8100S Series of Fast Ethernet switches in a stack configuration. For instructions on how to install the switches as stand-alone units, refer to the Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches. This preface contains the following sections: “Document Conventions” on page 14 “Contacting Allied Telesis” on page 15 Note This guide does not include the AT-8100S/48 and AT-8100S/48POE Switches. The initi
ページ14に含まれる内容の要旨
Preface Document Conventions This document uses the following conventions: Note Notes provide additional information. Caution Cautions inform you that performing or omitting a specific action may result in equipment damage or loss of data. Warning Warnings inform you that performing or omitting a specific action may result in bodily injury. 14
ページ15に含まれる内容の要旨
Stack Installation Guide for 8100S Series Switches Contacting Allied Telesis If you need assistance with this product, you may contact Allied Telesis technical support by going to the Support & Services section of the Allied Telesis web site at www.alliedtelesis.com/support. You can find links for the following services on this page: 24/7 Online Support — Enter our interactive support center to search for answers to your product questions in our knowledge database, to check support ticket
ページ16に含まれる内容の要旨
Preface 16
ページ17に含まれる内容の要旨
Chapter 1 Overview This chapter contains the following sections: “Features” on page 18 “8100S Twisted Pair Series Switches” on page 21 “8100S Fiber Optic Series Switches” on page 23 “Back Panel Components” on page 26 “Management Panel” on page 27 “Model Naming Conventions” on page 28 “10/100Base-TX Twisted Pair Ports” on page 30 “10/100/1000Base-T Twisted Pair Ports” on page 32 “SFP Slots” on page 34 “Power Over Ethernet” on page 35 “S1 and S2 Stacking Ports” on page 39 “
ページ18に含まれる内容の要旨
Chapter 1: Overview Features Here is a list of the switches and their features: 8100S Models Here are the 8100S Series switches: AT-8100S/24C AT-8100S/24 AT-8100S/24POE AT-8100S/16F8-SC AT-8100S/16F8-LC AT-8100S/24F-LC 10/100 Mbps Here are the basic features of the 10/100 Mbps twisted pair ports: Twisted Pair 8 or 24 ports per switch Ports 10Base-T and 100Base-TX compliant IEEE 802.3u Auto-Negotiation compliant Auto-MDI/MDIX 100 meters (328 feet) maximum operating distance
ページ19に含まれる内容の要旨
Stack Installation Guide for 8100S Series Switches Port prioritization 10/100/1000 Here are the basic features of the 10/100/1000 Mbps twisted pair ports: Mbps Twisted Two ports per switch Pair Ports 10Base-T, 100Base-TX, and 1000Base-T compliant IEEE 802.3u Auto-Negotiation compliant Auto-MDI/MDIX 100 meters (328 feet) maximum operating distance IEEE 802.3x flow control in 10/100Base-TX full-duplex operation IEEE 802.3x backpressure in 10/100Base-TX half-duplex operation IEEE
ページ20に含まれる内容の要旨
Chapter 1: Overview LEDs Here are the port LEDs: Duplex mode and link/activity LEDs for the twisted pair ports Link/activity LEDs for the 100Base-FX fiber optic ports Link/activity LEDs for the SFP slots Link LEDs for the stacking ports Stack ID number LED eco-friendly button to turn off the LEDs to conserve electricity MAC Address Here are the basic features of the MAC address tables of the switches: Table Storage capacity of 16,000 MAC address entries Automatic learning and agi
