ページ1に含まれる内容の要旨
Layer 2
Ethernet Switch
Allied Telesis AT-8000S
Installation Guide
AT-8000S Series Stackable Gigabit Ethernet Switches
613-001106 Rev C
ページ2に含まれる内容の要旨
Copyright 2011 Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc. Allied Telesis and the Allied Telesis logo are trademarks of Allied Telesis, Incorporated. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Telesis, Inc. reserves the right to make changes in specifications and other informat
ページ3に含まれる内容の要旨
Table of Contents Table of Contents Preface.................................................................................................................................... 6 How This Guide is Organized..........................................................................................................6 Document Conventions ...................................................................................................................6 Product Description..............................
ページ4に含まれる内容の要旨
Allied Telesis AT-8000S Switch Switch Installation Guide Stacking ................................................................................................................................ 30 Understanding the Stack Topology............................................................................................... 30 Stacking Chain Topology .............................................................................................................. 31 Stacking Members and Unit ID ...
ページ5に含まれる内容の要旨
Table of Contents Page 5
ページ6に含まれる内容の要旨
Allied Telesis AT-8000S Switch Installation Guide Preface This guide contains the hardware installation instructions for the AT-8000S/16, AT-8000S/24, AT-8000S/24POE, AT-8000S/48 and AT-8000S/48POE Fast Ethernet Switches. How This Guide is Organized This manual contains the following chapters: • Chapter 1 Product Description describes the features and components of the switches. • Chapter 2 Installation describes the installation instructions for the switches. • Chapter 3 Stacking describes th
ページ7に含まれる内容の要旨
Contacting Allied Telesis Contacting Allied Telesis This section provides Allied Telesis contact information for technical support as well as sales or corporate information. Online Support You can request technical support online by accessing the Allied Telesis Knowledge Base from the following web site: www.alliedtelesis.com/kb. You can use the Knowledge Base to submit questions to our technical support staff and review answers to previously asked questions. Email and Telephone For Technica
ページ8に含まれる内容の要旨
Allied Telesis AT-8000SSwitch Switch Installation Guide Chapter 1. Product Description The new AT-8000S series combines the best of the previous L2 series; stackability and affordability. The new AT-8000S series is an entry level managed switch for the SMB, Small Office/Field Office offering managed desktop connectivity. The fiber uplink provides connectivity between workgroups over a larger distances. In addition the AT-8000S series is also equipped with a copper 10/100/1000Base-T port for
ページ9に含まれる内容の要旨
Product Description Features The AT-8000S/16, AT-8000S/24, AT-8000S/24POE, AT-8000S/48 and AT-8000S/48POE features include the following: • Wirespeed switching traffic across all ports • Auto MDI/MDIX enabled • 802.1d, 1w, 1s priority tags supported • Broadcast storm control • IEEE 802.1Q tagged VLANs supported • GARP/GVRP supported • Port/MAC based VLANs supported • 802.3ad link aggregation Static and Dynamic (LACP) supported • IEEE 802.1P based QoS supported • Ingress rate limiting • Egress r
ページ10に含まれる内容の要旨
Allied Telesis AT-8000SSwitch Switch Installation Guide AT-8000S/16 Front Panel The following figure illustrates the AT-8000S/16 front panel. Figure 1: AT-8000S/16 Front Panel The AT-8000S/16 front panel is configured as follows: • 16 10/100Mbps Ports — RJ-45 ports designated as 10/100Base-T. The RJ-45 ports are designated as ports Ports 1 - 16. • 1 10/100/1000Base-T Copper Port — There is one copper 10/100/100Base-T port designated on the switch as port 17R. This port is paired with the SFP
ページ11に含まれる内容の要旨
Product Description AT-8000S/24 Front Panel The following figure illustrates the AT-8000S/24 front panel. Figure 3: AT-8000S/24 Front Panel The AT-8000S/24 front panel is configured as follows: • 24 10/100Mbps Ports — RJ-45 ports designated as 10/100Base-T. The RJ-45 ports are designated as ports Ports 1 - 24. • 2 10/100/1000Base-T Copper Ports — There are two copper 10/100/100Base-T ports designated on the switch as ports 25R and 26R. These ports are paired with the two SFP slots designated o
ページ12に含まれる内容の要旨
Allied Telesis AT-8000SSwitch Switch Installation Guide AT-8000S/24POE Front Panel The following figure illustrates the AT-8000S/24POE front panel. Figure 5: AT-8000S/24POE Front Panel The AT-8000S/24POE front panel is configured as follows: • 24 10/100Mbps Ports — RJ-45 ports designated as 10/100Base-T. The RJ-45 ports are designated as ports Ports 1 - 24. • 2 10/100/1000Base-T Copper Ports — There are two copper 10/100/100Base-T ports designated on the switch as ports 25R and 26R. These por
ページ13に含まれる内容の要旨
Product Description AT-8000S/48 Front Panel The following figure illustrates the AT-8000S/48 front panel. Figure 7: AT-8000S/48 Front Panel The AT-8000S/48 device front panel is configured as follows: • 48 10/100Mbps Ports — RJ-45 ports designated as 10/100Base-T. The RJ-45 ports are designated as ports Ports 1 - 48. • 2 10/100/1000Base-T Copper Ports — There are two copper 10/100/100Base-T ports designated on the switch as ports 49R and 50R. These ports are paired with the two SFP slots desig
ページ14に含まれる内容の要旨
Allied Telesis AT-8000SSwitch Switch Installation Guide AT-8000S/48POE Front Panel The following figure illustrates the AT-8000S/48POE front panel. Figure 9: AT-8000S/48POE Front Panel The AT-8000S/48 device front panel is configured as follows: • 48 10/100Mbps Ports — RJ-45 ports designated as 10/100Base-T. The RJ-45 ports are designated as ports Ports 1 - 48. • 2 10/100/1000Base-T Copper Ports — There are two copper 10/100/100Base-T ports designated on the switch as ports 49R and 50R. These
ページ15に含まれる内容の要旨
Product Description 10/100Base-T Fast Ethernet Ports Ports Description 10/100Base-T Fast Ethernet Ports The 10/100Base-T Fast Ethernet ports are RJ-45. The 10/100 Mbps port supports half- and full-duplex mode. 10/100/1000Base-T Uplink Ethernet Ports The 24/48 port devices contains two 10/100/100Base-T Gigabit ports, and the 16 port device contains one 10/100/100Base-T port. The RJ-45 1000 Mbps port supports 1000 mbps in full-duplex mode and 10/100 mbps half- and full-duplex mode. SFP Port Smal
ページ16に含まれる内容の要旨
Allied Telesis AT-8000SSwitch Switch Installation Guide Mode LEDs Selecting a particular mode determines what information is displayed on the port LED. For example, if the mode selected is "COL", then the LED on each port indicates the collision status of that port. The following figure illustrates the mode LEDs. Figure 11: Mode LEDs The mode LED indications are described in the following table: Table 1: Mode LED Indications LED Description LED Indication Description COL Green Data collisions
ページ17に含まれる内容の要旨
Product Description Port LEDs The stacking LED indications are described in the following table: Table 2: Stacking LED Indications LED Description LED Indication Description All LEDs off The device is operating as a standalone switch. S1 The device is master-enabled, and is either the master or backup Green of the stack, which is determined by the master election algorithm. S2 The device is master-enabled, and is either the master or backup Green of the stack, which is determined by the maste
ページ18に含まれる内容の要旨
Allied Telesis AT-8000SSwitch Switch Installation Guide The RJ-45 ports have two LEDs, one for Link and one for activity (Mode status for non PoE and Load status for PoE). The LED indications are described in the following table: Table 3: 10/100Base-T Fast Ethernet RJ-45 Port LED Indications Port Description LED Indication Description Left LED - Link Green A 100-Mbps link is established on the port. Off No link is established on the link. Right LED - Mode This indication is determined by the m
ページ19に含まれる内容の要旨
Product Description Port LEDs The 1000 Base-T/Combo Ethernet RJ-45 ports have two LEDs, one for speed and one for Link and activity. The LED indications are described in the following table: Table 4: Combo Port LED Indications Port Description LED Indication Description Copper Port Left LED - Speed Green A 1000-Mbps link is established on the port. Amber A 100-Mbps link is established on the port. A 10-Mbps Link is established on the port / No link Off established. Copper Port Right LED - Link
ページ20に含まれる内容の要旨
Allied Telesis AT-8000SSwitch Switch Installation Guide 24/48 Port Device System LEDs There are two system LEDs, the Power and Diagnostics LEDs. The following figure illustrates the Power and Diagnostics LEDs. Figure 16: SFP Port LEDs Power LED The PWR LED on the front panel of the device indicates the power supply status. The power supply port LED indications are described in the following table: Table 6: Power Supply LED Indications LED Description LED Indication Description Power Off The sys
