ページ1に含まれる内容の要旨
PoE-80
Eight-port Power over Ethernet Hub
User’s Guide
Version 1.06
April 2004
ページ2に含まれる内容の要旨
PoE-80 User’s Guide Table of Contents Copyright ............................................................................................................................................ 3 Federal Communications Commission (FCC) Interference Statement.............................................. 3 Information for Canadian Users.......................................................................................................... 4 ZyXEL Limited Warranty..............................
ページ3に含まれる内容の要旨
PoE-80 User’s Guide Copyright Copyright © 2004 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation.
ページ4に含まれる内容の要旨
PoE-80 User’s Guide If this equipment does cause harmful interference to radio/television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the deale
ページ5に含まれる内容の要旨
PoE-80 User’s Guide Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. For their own protection, users should ensure that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if p
ページ6に含まれる内容の要旨
PoE-80 User’s Guide Online Registration Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com for global products, or at www.us.zyxel.com for North American products. Syntax Conventions in this Guide The PoE-80 Eight-port Power over Ethernet Hub may be called the “PoE-80”, “the power injector” or “the system” in this guide. Customer Support When you contact your customer support representative please have the following information
ページ7に含まれる内容の要旨
PoE-80 User’s Guide 1 METHOD SUPPORT E-MAIL TELEPHONE WEB SITE REGULAR MAIL 1 SALES E-MAIL FAX FTP SITE LOCATION WORLDWIDE support@zyxel.com.tw +886-3-578-3942 www.zyxel.com ZyXEL Communications Corp. 6 Innovation Road II www.europe.zyxel.com Science Park ftp.zyxel.com Hsinchu 300 Taiwan sales@zyxel.com.tw +886-3-578-2439 ftp.europe.zyxel.com NORTH support@zyxel.com +1-800-255-4101 www.us.zyxel.com ZyXEL Communications Inc. AMERICA 1130 N. Miller St. +1-714-632-0882 Anaheim C
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
PoE-80 User’s Guide 1 About Your PoE-80 The PoE-80 Eight-port Power over Ethernet Hub is an eight-port power injector, designed for use with 10/100 BaseT Ethernet networks. The PoE-80 injects DC power through the unused twisted- wires (pairs 4/5 and 7/8) of a standard 8-pin CAT 5 cable. This allows increased flexibility in the locating of power over Ethernet (PoE) enabled devices by eliminating the need for a nearby power source. 1.1 Key Features Eight RJ-45, 10/100 Mbps PoE-enabled port
ページ10に含まれる内容の要旨
PoE-80 User’s Guide 2 Hardware and Installation Do not block the device’s rear panel fans or the side panel ventilation holes. Leave space between devices when stacking. 2.1 Desktop Installation Step 1. Set the PoE-80 upside-down on a sturdy level space with a power outlet nearby. Step 2. Make sure there is enough clearance around the PoE-80 to allow air circulation and the attachment of cables and the power cord. Step 3. Remove the adhesive backing from the supplied rubber feet. Step
ページ11に含まれる内容の要旨
PoE-80 User’s Guide Step 2. After attaching both mounting brackets, position the PoE-80 in the rack by lining up the holes in the brackets with the appropriate holes on the rack. Secure the PoE-80 to the rack with the rack’s mounting screws. 2.3 Rear Panel Connections Connect the female end of the power cord to the power receptacle. Connect the male end to a 100- 240V AC, 50-60 Hz power source (wall outlet). Push the power switch to the ON position. 11
ページ12に含まれる内容の要旨
PoE-80 User’s Guide 2.4 Front Panel Connections The DATA OUT ports send power and data to the PoE-enabled devices. Use Ethernet cables to connect the eight DATA OUT RJ-45 Ethernet ports to PoE-enabled devices. Use Ethernet cables to connect the eight DATA IN RJ-45 Ethernet ports to the LAN. The maximum Ethernet cable length is 100m. Use a console cable to connect the console port to a management computer. 2.5 Front Panel LEDs The LEDs give real-time information about the system’s ope
ページ13に含まれる内容の要旨
PoE-80 User’s Guide Step 1. Insert the included CD-ROM into your CD-ROM drive. Step 2. Run (browse to and double-click) setup.exe. Step 3. The installation screen displays. Click OK to go to the next step. Step 4. Click the icon button to start the installation. Step 5. Choose a group name (you can use the default) and click Continue. 13
ページ14に含まれる内容の要旨
PoE-80 User’s Guide Step 6. Click Yes if the Version Conflict screen displays. Step 7. When installation finishes, click OK to finish. 14
ページ15に含まれる内容の要旨
PoE-80 User’s Guide 3.1 Starting the Utility Click Start, Programs, ZyXEL Power over Ethernet Series and then ZyXEL Power over Ethernet Series to run the software utility. 4 Removing the Utility Use the following procedure to remove the software utility from your computer. Step 1. Click Start, Settings, Control Panel. 15
ページ16に含まれる内容の要旨
PoE-80 User’s Guide Step 2. Click Add or Remove Programs. Step 3. Click ZyXEL Power over Ethernet Series and Change/Remove. Step 4. Click Yes to remove the software utility. Step 5. Click OK. 16
ページ17に含まれる内容の要旨
PoE-80 User’s Guide 5 Managing the PoE-80 Connect to the PoE-80 through a computer connected to the console port. Then, connect a PoE- enabled device to a DATA OUT port on the PoE-80. Start the utility and the management interface displays as shown next. The configuration changes you make in the utility are not saved when you turn off the power to the PoE-80. 5.1 System Setup & Control This section of the screen controls the main system level parameters setup for the PoE-80. 17
ページ18に含まれる内容の要旨
PoE-80 User’s Guide LABEL DESCRIPTION Master Enable This field enables or disables the use of the utility to control the ports. You must enable this item to the utility to control the ports. Calibrate System When the PoE-80 is not functioning properly, select this check box and click Save to Device to reset the PoE-80 to the default settings. The device resets and the PWR FWD and PWR OFF LEDs flash. You must disconnect all of the PoE-enabled devices from the PoE-80 before you calibrate
ページ19に含まれる内容の要旨
PoE-80 User’s Guide LABEL DESCRIPTION Firmware Version This displays the PoE-80’s firmware version. Utility Version This displays the version of this utility. Current Port This displays the port that the system’s internal state sequencer is presently Serviced accessing. Total Port Power This displays the total power of the PoE-80’s ports (combined) in the (W) system. Enable Auto- Select this check box to have the system automatically refresh the system Refresh parameters (about once
ページ20に含まれる内容の要旨
PoE-80 User’s Guide CLASS USAGE POWER DEVICE POWER (W) CLASSIFICATION CURRENT (MA) MIN MAX MIN MAX 0 Default 0.44 12.95 0 4 1 Optional 0.44 3.84 9 12 2 Optional 3.84 6.49 17 20 3 Optional 6.49 12.95 26 30 4 Optional Reserved for future use 36 44 LABEL DESCRIPTION LED Status This is the current LED indicator display – green, red, or yellow. The LED Indicators indicator changes depending on the status of the connected PoE-enabled device. Green: The PoE-enabled device is connec
