ページ1に含まれる内容の要旨
®
TS1000, TS4000, TS6000 Series
Tamper Switch Kits
Installation/Operation Manual
C498M-A (9/95)
1.0 WARNINGS 2.0 SCOPE
Prior to installation and use of this product, the follow- The information within this manual covers the installa-
ing WARNINGS should be observed. tion of the TS1000, TS4000 and TS6000 Series Tamper
Switch Kits.
1. Installation and servicing should only be done by
Qualified Service Personnel and conform to all Installation should be in accordance with all applicable
Local code
ページ2に含まれる内容の要旨
3.0 DESCRIPTION 4.0 SPECIFICATIONS The TS Series tamper switch kits are designed for use MECHANICAL in the HS Series of enclosures. The TS1000 is designed for use in the HS1000 Series, the TS6000 for use in the Switch: Plunger type with .20" travel 6-32 x HS6000 Series, and the TS4000 is a generic switch kit 1/2" adjustment screw for use in many of the high security enclosures as noted below). Wire leads: 12", #22 gauge Black — Common The tamper switch can be used for both “Normally White — No
ページ3に含まれる内容の要旨
5.0 INSTALLATION 5.1 MOUNTING THE UNIT Many of the High Security Series enclosures come stan- To mount the tamper switch kit to an enclosure, per- dard from the factory with a tamper switch(es) mounted form the following steps: on the secured access door. 1. Open the enclosure through the access door oppo- Should additional switches be required, and for site of the desired “alarmed” opening. connection of those switches, please read the following sections. 2. Remove the protective covering on
ページ4に含まれる内容の要旨
6.0 WARRANTY AND RETURN INFORMATION WARRANTY RETURNS Pelco will repair or replace, without charge, any merchandise proved In order to expedite parts returned to the factory for repair or credit, please defective in material or workmanship for a period of one year after the date call the factory at (800) 289-9100 or (559) 292-1981 to obtain an of shipment. authorization number (CA number if returned for credit, and RA number Exceptions to this warranty are as noted below: if returned for