ページ1に含まれる内容の要旨
Strengthened Product Lineup
to Meet Diversified Demands
FP-X Series
Programmable Controllers
01/2008
ページ2に含まれる内容の要旨
Modbus-RTU Ethernet General purpose serial communications PLC-Link Computer Link High performance High performance multiple functions and strengthened lineup High-speed operation The 32-bit RISC processor provides the top-level processing speed in compact Faster operation of basic instructions Faster operation of high-level instructions PLCs. The scan time is 2ms or less for 5000 steps*¹. A high-speed PLC is indis- E.g. ST, AN or OR E.g. floating point operation instructions pensable for
ページ3に含まれる内容の要旨
Product lineup FP-X meets a variety of requirements Product lineup Control unit: 18 types (14, 30 or 60 points) x (relay, NPN or PNP) x (AC or DC) Expansion unit: 9 types (16 points) x (relay, NPN or PNP) (30 points) x (Relay, NPN or PNP) x (AC or DC) Relay output NPN output PNP output AC DC AC DC AC DC � � � � � � 14 points � � � � � � 30 points � � � � � � 60 points � � � (Without a power (Without a power (Without a power 16 points supply section) supply section) supply section) � � � �
ページ4に含まれる内容の要旨
Product lineup The highly expandable lineup satisfies a wide range of demands. Relay ouput Transistor ouput Control unit DC power supply AC power supply DC power supply AC power supply AFPX-C14TD (NPN) AFPX-C14T (NPN) AFPX-C14RD AFPX-C14R AFPX-C14PD (PNP) AFPX-C14P (PNP) 8-point input of 24VDC 8-point input of 24VDC 8-point input of 24VDC 8-point input of 24VDC 6-point output of 2A relay 6-point output of 2A relay 0.5A/5 to 24VDC 0.5A/5 to 24VDC Program capacity: 16k steps 2-point potentio
ページ5に含まれる内容の要旨
FP-X series Name and function of each part Control Unit (Model: Relay output type AFPX-C30R) Input terminals Power terminals Add-on cassette interface cover Connector for add-on cassette I/O status monitor LED Connector for expansion unit USB communication port (excluding C14R) RUN/PROG. mode selection switch Connector Potentiometer for battery RS232C tool port Connector for expansion unit 24V DC service power output terminals C14: 0.15A Output terminals C30, C60: 0.4A (DC powered type has n
ページ6に含まれる内容の要旨
FP-X series High capacity, ultra high-speed processing The high-level basic performance provides sufficient room for future equipment expansion. Program capacity Abundant program capacity—32k steps (16k steps for C14) C30/C60 FP-X C30, C60 32k The program capacity of 32k steps, exceeding the capacity of most compact PLCs, can flexibly handle a wide variety of applications requiring future equipment expan- FP-X C14 C14 16k sion. An adequate comment area has of course been reserved. Free com
ページ7に含まれる内容の要旨
FP-X series Great expandability Only 1 E16 can be connected serially. E16 can be sandwiched with E30* C60 E16 C60 E16 E16 E16 C60 C60 E16 E30 E16 E30 NG NG OK OK * E30 requires an external power supply Connection by using the cable included with each expansion unit. C60 E30 E30 The units can be mounted very close to each other with the cable bent inside between the units in order to save space. An 80-cm expansion cable is Note: Total expansion also available as an option. cable length: 1
ページ8に含まれる内容の要旨
FP-X series Add-on cassette (lineup) “Require slightly more functions”, “Want to add functions to the existing equipment” —The rich variety of add-on cassettes helps solve these requirements. The add-on cassette easily adds small quantities of functions and I/O points. A: Available, N/A: Not available Attachable position (see the figure below) Add-on Cassette Part number Specifications A, lower A, upper B C 4-point input of 24VDC, Bi-direction (Sink/Source) A N/A A I/O cassette AFPX-IN4T3 3-
ページ9に含まれる内容の要旨
FP-X series Add-on cassette (Ethernet) This Ethernet cassette fulfills user requiremens such as the “easy collection of inspection/ production data” or “remote changing of ladder programs”, using LAN (Ethernet). The industry’s first*¹ add-on to equip a compact PLC with an Ethernet port AFPX-COM5 *1: In Japan, as of May 1, 2007 Enables easy Ethernet connections with a compact PLC, which were previously not possible. Also equipped with an RS232C port. Together with the tool port (programmi
ページ10に含まれる内容の要旨
FP-X series Positioning FP-X perfectly fits the need for low cost “multi-axis positioning control in small-scale equipment”. Built-in 4-axis pulse output (Transistor output type) Item Specification The transistor output type C14 comes with 3-axis while C30/C60 comes Pulse Output C14: 100kHz(CH0,1), 20kHz(CH2) C30,C60: Max Frequency 100kHz(CH0,1), 20kHz(CH2,3) with 4-axis pulse output inside the control unit. The multi-axis control, which previously required a higher-level PLC or additional
ページ11に含まれる内容の要旨
FP-X series Multi-point PID control High-accuracy PID control is possible by adopting a sophisticated algorithm and floating-point operations. Higher accuracy is obtained by ultra high-speed computations in a 32µs/loop. For example, a 16-loop control only adds a scan time of 0.5ms by ensuring minimum impact on the tact time. The simultaneous multi-point auto-tuning simplifies complex parameter setting. The high-speed control PI-D*¹ mode and overshoot suppression I-PD*² mode are availabl
ページ12に含まれる内容の要旨
FP-X series Reassuring data security Protects your important programs by preventing illegal copies. Program upload is easily prohibited by tool software FPWIN. Reading a program from the PLC main unit is virtually impossible. In the upload-prohibited condition, program transfers to the master memory are also prohibited. Release of an upload-prohibited condition is possible with a forced release accompanied by a program deletion. Program updates are easily carried out by transferring th
ページ13に含まれる内容の要旨
FP-X series Network Different types of equipment need to be linked – FP-X flexibly meet such requirements. Up to 3 serial communication ports can be used simultaneously Usable interfaces include RS232C, RS485, RS422 and USB. * The RS232C tool port can be used as a general-purpose serial communication port. Communication cassette (two-channel type) AFPX-COM2 (RS232C + RS232C) AFPX-COM4 (RS485 + RS232C) AFPX-COM5 (Ethernet + RS232C) AFPX-COM6 (RS485 + RS485) COM1: RS232C, RS485, Ethernet COM2: R
ページ14に含まれる内容の要旨
FP-X series Other useful functions The master memory makes program transfer easy, and a real-time clock is also included The built-in 512kb flash-ROM can store a 32-k step pro- To the field operation Program gram as well as the comments and FPWIN Pro source Master memory transfer file. Program update in a remote location is easy by simply FPWIN GR/Pro FP-X sending master memory for local installation. As the master memory stores the password informa- Password used Password locked tion
ページ15に含まれる内容の要旨
FP-X series Programming according to the international standard IEC 61131-3 FPWIN Pro is the Panasonic programming software developed according to the international standard IEC 61131-3 (for Windows 98, NT V4.0, 2000, ME, XP or Vista). This new version is a result of experience gained over many years. We were one of the first PLC manufacturers to offer IEC 61131-3 programming software, and we are a leading member of the international organization PLCopen. Input and output variables Multiple a
ページ16に含まれる内容の要旨
FP-X series Product number list FP-X control unit N/A: Not available A: Available Product name Power supply Specifications Product number Program USB Potentiometer capacity port VDC FP-X C14R 100 to 240VAC 8-point input of 24VDC, 6-point output of 2A relay 16k steps 2-point N/A AFPX-C14R FP-X C14RD 24VDC 8-point input of 24VDC, 6-point output of 2A relay 16k steps 2-point N/A AFPX-C14RD FP-X C30R 100 to 240VAC 16-point input of 24VDC, 14-point output of 2A relay 32k steps 2-point A AFPX-C30
ページ17に含まれる内容の要旨
FP-X series Product number list FP-X add-on cassette Product name Specifications Product number FP-X Input /Output cassette 4-point input of 24VDC, bi-directional (sink/source), 3-point output of NPN transistor 0.3 A/24VDC AFPX-IN4T3 FP-X Input cassette 8-point input of 24VDC, bi-directional (sink/source) AFPX-IN8 8-point output of NPN transistor, 0.3A/24VDC AFPX-TR8 FP-X Output cassette 6-point output of PNP transistor, 0.5A/24VDC AFPX-TR6P High-speed counter input: single-phase 2ch., each 8
ページ18に含まれる内容の要旨
FP-X series Product number list FP0 expansion units Specifications Product name Product number Power supply Number of I/O points Input Output Connection type voltage 8 24VDC Sink/Source (±common) MIL connector Input: 8 FP0-E8X Input: 4 8 24VDC Terminal block 24VDC Sink/Source (±common) Relay output: 2A FP0-E8RS Output: 4 8 Output: 8 24VDC Relay output: 2A Terminal block FP0-E8YRS FP0 E8 Expansion Unit Transistor output: 8 Output: 8 MIL connector FP0-E8YT NPN 0.1A Transistor output: Ou
ページ19に含まれる内容の要旨
FP-X series Specifications Programmable display GT series Product name Description Product number GT01 Main Unit Black AIGT0030B1 5VDC RS232C type Ash gray AIGT0030H1 STN monochrome LCD Black AIGT0030B RS232C type Ash gray AIGT0030H 24VDC Black AIGT0032B RS422/RS485 type Ash gray AIGT0032H GT01R Main Unit Pure black AIGT0230B1 5VDC RS232C type Silver AIGT0230H1 STN monochrome LCD Pure black AIGT0230B RS232C type Silver AIGT0230H 24VDC Pure black AIGT0232B RS422/RS485 type Silver AIGT0232H Blac
ページ20に含まれる内容の要旨
FP-X series Specifications General specifications Power consumption, weight Item Description Product name Part number Current consumption Weight Rated voltage 100 to 240VAC (AC power), 24VDC (DC power) 2 AFPX-C14 Approx. 280g or less 26W or less* 85 to 264VAC (AC power), 20.4 to 28.8VDC (DC power) Operating voltage range 2 Control Unit AFPX-C30 52W or less* Approx. 490g or less C14: 24VDC/0.15A, C30 and C60: 24VDC/0.4A Service power output 2 AFPX-C60 64W or less* Approx. 780g or less 40A
