ページ1に含まれる内容の要旨
48 10/100 Ports
+ 2 Combo SFP Gigabit Ports
+ 2 10/100/1000 Gigabit Ports
Multi-Layer Stackable Management Switch
MIL-SM4804G
Quick Installation Guide
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Quick Installation Guide 48 10/100 Ports + 2Combo SFP + 2 Gigabit Copper Multi-Layer Stackable Management Switch Layer 2 Stackable Switch with 50 100BASE-TX (RJ-45) Ports, and 2 Gigabit Combination Ports (RJ-45/SFP)
ページ4に含まれる内容の要旨
MIL-SM4804G 90000444 REV A
ページ5に含まれる内容の要旨
Regulatory Approval • FCC Class A • UL 60950 • CSA C22.2 No. 60950 • EN60950 •CE • EN55022 Class A • EN55024 Canadian EMI Notice This Class A digital apparatus meets all the requirements of the Canadian Interfer- ence-Causing Equipment Regulations Cet appareil numerique de la classe A respecte toutes les exigences du Regle- ment sur le materiel brouilleur du Canada. European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/
ページ6に含まれる内容の要旨
Trademarks The MiLAN logo and MiLAN Technology trademarks are registered trademarks of MiLAN Technology in the United States and/or other countries. To Contact MiLAN Technology For prompt response when calling for service information, have the following infor- mation ready: - Product serial number and revision - Date of purchase - Vendor or place of purchase You can reach MiLAN Technology technical support at: E-mail: support@milan.com Telephone: +1.408.744.2751 Fax: +1.408.744.2771 MiLAN Techn
ページ7に含まれる内容の要旨
Compliances and Safety Warnings CE Mark Declaration of Conformance for EMI and Safety (EEC) This information technology equipment complies with the requirements of the Council Directive 89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility and 73/23/EEC for electrical equipment used within certain voltage limits and the Amendment Directive 93/68/EEC. For the evaluation of the compliance with these Directives, the following standards were a
ページ8に含まれる内容の要旨
Safety Compliance Warning: Fiber Optic Port Safety When using a fiber optic port, never look at the transmit laser while it is CLASS I powered on. Also, never look directly at the fiber TX port and fiber cable LASER DEVICE ends when they are powered on. Avertissment: Ports pour fibres optiques - sécurité sur le plan optique Ne regardez jamais le laser tant qu'il est sous tension. Ne regardez DISPOSITIF LASER jamais directement le port TX (Transmission) à fibres optiques et les DE CLASSE I
ページ9に含まれる内容の要旨
Power Cord Set U.S.A. and Canada The cord set must be UL-approved and CSA certified. The minimum specifications for the flexible cord are: - No. 18 AWG - not longer than 2 meters, or 16 AWG. - Type SV or SJ - 3-conductor The cord set must have a rated current capacity of at least 10 A The attachment plug must be an earth-grounding type with NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration. Denmark The supply plug must comply with Section 107-2-D1, Standard DK2-1a or DK2-5a. S
ページ10に含まれる内容の要旨
France et Pérou uniquement: Ce groupe ne peut pas être alimenté par un dispositif à impédance à la terre. Si vos alimentations sont du type impédance à la terre, ce groupe doit être alimenté par une tension de 230 V (2 P+T) par le biais d’un transformateur d’isolement à rapport 1:1, avec un point secondaire de connexion portant l’appellation Neutre et avec raccordement direct à la terre (masse). Cordon électrique - Il doit être agréé dans le pays d’utilisation Etats-Unis et Le cordon doit
ページ11に含まれる内容の要旨
Stromkabel. Dies muss von dem Land, in dem es benutzt wird geprüft werden: Schweiz Dieser Stromstecker muß die SEV/ASE 1011Bestimmungen einhalt- en. Europe Das Netzkabel muß vom Typ HO3VVF3GO.75 (Mindestanforderung) sein und die Aufschrift oder tragen. Der Netzstecker muß die Norm CEE 7/7 erfüllen (”SCHUKO”). Warnings and Cautionary Messages Warning: This product does not contain any serviceable user parts. Warning: Installation and removal of the unit must be carried out by qual
ページ12に含まれる内容の要旨
Environmental Statement The manufacturer of this product endeavours to sustain an environmentally-friendly policy throughout the entire production process. This is achieved though the following means: • Adherence to national legislation and regulations on environmental production standards. • Conservation of operational resources. • Waste reduction and safe disposal of all harmful un-recyclable by-products. • Recycling of all reusable waste content. • Design of products to maximize recyclab
ページ13に含まれる内容の要旨
Contents Chapter 1: Introduction 1-1 Overview 1-1 Switch Architecture 1-2 Network Management Options 1-2 Description of Hardware 1-2 10BASE-T/100BASE-TX Ports 1-2 1000BASE-T/SFP Ports 1-3 Stacking Ports 1-4 Port and System Status LEDs 1-5 Power Supply Receptacles 1-7 Features and Benefits 1-7 Connectivity 1-7 Expandability 1-7 Performance 1-8 Management 1-8 Chapter 2: Network Planning 2-1 Introduction to Switching 2-1 Application Examples 2-2 Collapsed Backbone 2-2 Network Aggregation Plan 2-3 R
ページ14に含まれる内容の要旨
Contents Chapter 4: Making Network Connections 4-1 Connecting Network Devices 4-1 Twisted-Pair Devices 4-1 Cabling Guidelines 4-1 Connecting to PCs, Servers, Hubs and Switches 4-2 Network Wiring Connections 4-2 Fiber Optic SFP Devices 4-4 Connectivity Rules 4-5 1000BASE-T Cable Requirements 4-5 1000 Mbps Gigabit Ethernet Collision Domain 4-6 100 Mbps Fast Ethernet Collision Domain 4-6 10 Mbps Ethernet Collision Domain 4-6 Cable Labeling and Connection Records 4-7 Appendix A: Troubleshooting A-1
ページ15に含まれる内容の要旨
Tables Table 1-1 Port Status LEDs 1-5 Table 1-2 System Status LEDs 1-6 Table 3-1 Serial Cable Wiring 3-9 Table 4-1 Maximum 1000BASE-T Gigabit Ethernet Cable Length 4-6 Table 4-2 Maximum 1000BASE-SX Gigabit Ethernet Cable Lengths 4-6 Table 4-3 Maximum 1000BASE-LX Gigabit Ethernet Cable Length 4-6 Table 4-4 Maximum 1000BASE-LH Gigabit Ethernet Cable Length 4-6 Table 4-5 Maximum Fast Ethernet Cable Length 4-6 Table 4-6 Maximum Ethernet Cable Length 4-6 Table A-1 Troubleshooting Chart A-1 Table A-2
ページ16に含まれる内容の要旨
Figures Figure 1-1 Front and Rear Panels 1-1 Figure 1-2 Stacking Ports 1-4 Figure 1-3 Port LEDs 1-5 Figure 1-4 System LEDs 1-6 Figure 1-5 Power Supply Receptacles 1-7 Figure 2-1 Collapsed Backbone 2-2 Figure 2-2 Network Aggregation Plan 2-3 Figure 2-3 Remote Connections with Fiber Cable 2-4 Figure 2-4 Making VLAN Connections 2-5 Figure 3-1 RJ-45 Connections 3-2 Figure 3-2 Attaching the Brackets 3-3 Figure 3-3 Installing the Switch in a Rack 3-4 Figure 3-4 Attaching the Adhesive Feet 3-5 Figure 3
ページ17に含まれる内容の要旨
Chapter 1: Introduction Overview The MIL-SM4804G switch is a stackable Fast Ethernet switch with 48 10BASE-T/ 1 100BASE-TX ports, and two 1000BASE-T ports that operate in combination with two Small Form Factor Pluggable (SFP) transceiver slots. These switches also provide two 1 Gbps built-in stacking ports for connecting up to four MIL-SM4804G units in a stack. The stacking ports can also be used as normal Ethernet ports in standalone mode. The switch also includes an SNMP-based management a
ページ18に含まれる内容の要旨
Introduction 1 Switch Architecture 2 The MIL-SM4804G employs a wire-speed, non-blocking switching fabric . This permits simultaneous wire-speed transport of multiple packets at low latency on all ports. The switches also features full-duplex capability on all ports, which effectively doubles the bandwidth of each connection. The switches uses store-and-forward switching to ensure maximum data integrity. With store-and-forward switching, the entire packet must be received into a buffer and c
ページ19に含まれる内容の要旨
Description of Hardware 1 3 Each port also supports IEEE 802.3x auto-negotiation of flow control , so the switch can automatically prevent port buffers from becoming saturated. 1000BASE-T/SFP Ports These are combination Gigabit RJ-45 ports with shared Small Form Factor Pluggable (SFP) transceiver slots (See Figure 1-1, Ports 25-26/49-50). If an SFP transceiver (purchased separately) is installed in a slot and has a valid link on the port, the associated RJ-45 port is disabled. The 1000BASE-T
ページ20に含まれる内容の要旨
Introduction 1 Stacking Ports The unit provides two stacking ports that provide a 4 Gbps stack backplane connection. You can stack up to four MIL-SM4804G units using Category 5 Ethernet cables (purchased separately). The Master button enables one switch in the stack to be selected as the master. This is the unit through which you manage the entire stack. The stacking ports can also be used as normal Ethernet ports in standalone mode by pressing the Uplink button. Master Button Uplink Butto
