ページ1に含まれる内容の要旨
® ™ ®
AAC-3 , AAC-2 and CellSMART
Multi-service Access
Concentrators
CellSMART
AAC-3
AAC-2
Features
Scalable architecture provides
fl exibility as network requirements
change
Multi-service access in a single
device reduces recurring monthly
access costs
™
AAC Multi-service Access Concentrators
Large variety of available interfaces
cost-effectively connect voice, video and
supply serial ports, Frame Relay and
T1/E1, NxT1/E1 IMA, T3/E3, and
data traffi c to private Wide Area Networks
ページ2に含まれる内容の要旨
® ™ ® AAC-3 , AAC-2 , and CellSMART Description The AAC family offers a fl exible, modular The AAC-2 provides economical integration architecture, allowing you to choose the most of services over public and private networks at cost-effective service for each application and speeds ranging from T1/E1 to OC-3c/STM-1. Its manage everything from a single platform. Each smaller chassis supports up to three PM/PLM AAC contains slots for Protocol Modules (PM) that pairs, making it suitable for mid-s
ページ3に含まれる内容の要旨
Physical Layer Modules Protocol Modules ® ™ ® AAC-3 , AAC-2 and CellSMART Applications The wide array of Physical Layer Modules and Shaping Cell PM is designed for use with public ATM Protocol Modules supports old and new applications services, shaping each connection to ensure the alike. On the user side, legacy interfaces such as traffi c complies with carrier service level agreements. V.35/EIA-530 Packet and T1/E1 CBR protect your Multiple PMs are available for Frame Relay services, investme
ページ4に含まれる内容の要旨
® ™ ® AAC-3 , AAC-2 , and CellSMART OC-3/STM-1 T3/E3 J2 IMA T1/E1 V.35, X.21 HSSI Ethernet SM or MM T1/E1 EIA-530 ATM UNI ____________________________________________________________________________________________________ ATM DXI ____________________________________________________________________________________________________ Frame Relay ____________________________________________________________________________________________________ HDLC or PPP _________
ページ5に含まれる内容の要旨
® ™ ® AAC-3 , AAC-2 and CellSMART AAC Service Data Module (SDM) Supports ATM Managed Services Monitors up to 512 VCs The Service Data Module for the AAC acts ® as a Visual Networks Analysis Service Element Monitors ATM traffi c on user-specifi ed ports (ASE). Specifi cally designed to support NxT1/E1 IMA and VCs, up to a maximum aggregate rate or DS3/E3 ATM networks, it monitors user-specifi ed equivalent to a bi-directional DS3 ATM ports and circuits, and communicates service ® Provi
ページ6に含まれる内容の要旨
® ™ ® AAC-3 , AAC-2 , and CellSMART Specifi cations AAC-3 CHASSIS Dimensions (H x W x D): 13.95” x 17.32” x 19” (354.3 x 440 x 482.6 mm) Weight: 60 lbs. (27 kg) Mounting: Available for 19-inch or 23-inch standard equipment racks Operating Temperature: 32º F to 104º F, ambient (0° C to 40° C) Operating Humidity: 5% to 95%, non-condensing AAC-2 AND CELLSMART 200 CHASSIS Dimensions (H x W x D): 6.95” x 17.32” x 19” (176.5 x 440 x 482.6 mm) Weight: 29 lbs. (13.2 kg) Mounting: Available for 19-inch
ページ7に含まれる内容の要旨
® ™ ® AAC-3 , AAC-2 and CellSMART Common Modules (continued) ALARM MODULE Indicators: Critical, Major and Minor alarm indicators are viewable from the front Alarm: ACO (Automatic Cut Off) button disables audible alarms Confi guration backup: Flash SERVICE DATA MODULE (SDM) System indicators: Critical, Major and Minor SDM Indicators: SDM status and monitored traffi c Alarm: ACO (Automatic Cut Off) button disables audible alarms and ACO indicator Confi guration backup: 1 Mbyte non-volatile confi gura
ページ8に含まれる内容の要旨
® ™ ® AAC-3 , AAC-2 , and CellSMART Select Protocol Modules (continued) OCTAL CES PROTOCOL MODULE Protocols supported: Structured or unstructured circuit emulation over AAL1 Dynamic bandwidth allocation based on CAS signaling, idle code detection, or V.35 control signals Connections: 32 unicast or multicast per port, 256 per module Output queuing: User-selectable depth of CDV absorption queue to 1 ms Clocking: Synchronous or asynchronous (Adaptive) Logical bundles: 1 DS0 to 24 DS0s (T1) or 31 D
ページ9に含まれる内容の要旨
® ™ ® AAC-3 , AAC-2 and CellSMART Select Physical Layer Modules (continued) DS3 AND E3 PHYSICAL LAYER MODULES Interface connector: 75 ohm coaxial BNC Line rate: DS3 - 44.736 Mbps E3 - 34.386 Mbps OC-3C/STM1 SINGLE AND MULTI-MODE PHYSICAL LAYER MODULES Interface connector:Duplex SC Line speed: 155.52 Mbps Wavelength: 1310 nm (single-mode or multi-mode) QUAD ETHERNET PHYSICAL LAYER MODULE Data rates: 10 Mbps (per port) half duplex Number of ports: 4 Interface connectors: RJ4 Ordering Information
ページ10に含まれる内容の要旨
® ™ ® AAC-3 , AAC-2 , and CellSMART Ordering Information Description Catalog Number Physical Layer Modules AAC DS3 Physical Layer Module 10300 AAC HSSI Physical Layer Module 10301 AAC Quad DSX-1 Physical Layer Module 10302 AAC Tri V.35/EIA-530/X.21 and one DSX-1 Physical Layer Module 10303 AAC OC-3c/STM1 MM Fiber Physical Layer Module 10304 AAC OC-3c/STM1 SM Fiber Physical Layer Module 10305 AAC E3 Physical Layer Module 10306 AAC Quad E1 Physical Layer Module 10307 AAC Tri
ページ11に含まれる内容の要旨
® ™ ® AAC-3 , AAC-2 and CellSMART Ordering Information Description Catalog Number Accessories AAC-3 Fan Tray Assembly (Spare) 10080 AAC-3 23" Rack Mount Brackets 10081001 AAC-2 23" Rack Mount Brackets 10081010 AAC Blank Panel, 1 Slot (Spare) 10082 AAC-3 Blank Panel, Power Supply (Spare) 10084 AAC-3 Cable Management Bar 10087 AAC-2 Enhanced NEBS Baffl e Kit 10088 AAC Manual Set, CD (Spare) 10090-310 AAC/CellSMART Planning Guide, printed 5000548 AAC/CellSMART Installation Guide, printed (sp
ページ12に含まれる内容の要旨
® ™ ® AAC-3 , AAC-2 and CellSMART Multi-service Access Concentrators Web Site: www.kentrox.com Phone: 503-643-1681 • Toll Free: 800-733-5511 • Fax: 503-350-6897 Kentrox, LLC., 20010 NW Tanasbourne Drive, Hillsboro, OR 97124 Kentrox, AAC-3, CellSMART and DataSMART are registered trademarks of Kentrox, LLC. AAC, AAC-2, FrameVision, ServicePoint and ServicePoint Manager are trademarks of Kentrox, LLC. Visual Networks and Visual UpTime are registered trademarks of Visual Networks Technologies, Inc
