ページ1に含まれる内容の要旨
SWITCHES
120 |
Limit Switches
The LS Series fits into places too small for most fully adjustable limit switches.
The side rotary models can be adjusted for clockwise and/or counter-clockwise
operation. The SZL-VL Series miniature models are designed for applications
requiring a small mounting space. The EVN2000 Series limit switch has a new
design that eliminates the need to gain access to the inside of the housing, making
a housing cover, cover screws, and a gasket obsolete.
Features u
ページ2に含まれる内容の要旨
SWITCHES | 121 Heavy-Duty Limit Switches The HDLS Series heavy-duty limit switches are designed for a long life. Housed in a rugged corrosion-resistant zinc body, the switch is epoxy-coated for protection. Its unique, all-metal drive train provides consistent operating characteristics and lasts longer than drive trains with plastic parts. The HDLS offers sintered bronze bearings on 303 stainless steel operating shafts and all versions offer the same actuator lever tracking dimensions for ex
ページ3に含まれる内容の要旨
SWITCHES 122 | Standard Basic Switches BZ/BA Series standard basic switches are used for simple or precision on/off application needs. DT Series standard basic switches consist of two independent, single-pole, double-throw circuits in one housing actuated by one actuator. The terminals are separated by a non-conductive shield to reduce shorting. Standard basic switches Features u Benefits u Applications u • Low operating force and differential travel • Elongated mounting hole for easie
ページ4に含まれる内容の要旨
SWITCHES | 123 Solid State Basic Switches The VX Series combines miniature-size construction, operating, and mounting convenience with solid state reliability. The switching element is a Hall effect transducer with a trigger and amplifier integrated on a silicon chip. An integral magnet molded into the plunger actuates the transducer and produces a digital logic-level output. Solid state basic switch Features u Benefits u Applications u • Plunger -operated, non-contact • Accepts AMP conne
ページ5に含まれる内容の要旨
SWITCHES 124 | SX Series Subminiature Basic Switches SX Series subminiature basic switches are used for simple or precision on/off application needs. They are small, precision snap-action switches that are ideal where savings in space and weight are important. Features u Benefits u Applications u • Available in various voltage • Wear-resistant phenolic base and cover • Consumer electronics and current ratings • Operating temperature: -53ºC to +121ºC • Data transmission and • V arie
ページ6に含まれる内容の要旨
SWITCHES | 125 V7 Series Miniature Basic Switches V7 Series basic switches are used for simple or precision on/off, end of limit, presence/absence, pressure, temperature, and manual operator interface application needs. There are also various actuator options to meet different application requirements. Features u Benefits u Applications u • Physically interchangeable • Operating temperature: • Consumer electronics with existing V3 switches -40ºF to +300ºF • Data transmission and
ページ7に含まれる内容の要旨
SWITCHES 126 | Z Series Basic Switches Z Series basic switches are used for simple on/off application needs. These switches are available in four types: ZM—subminiature, integral levers available; CE: 61058-1, UL: E12252, and CSA: 212438; ZX—sub-subminiature, integral levers available; CE: 61058-1, UL: E12252, and CSA: 212438; ZV—subminiature, snap-on levers available; CE: 61058-1 and UL/c-UL: E12252; ZW—sealed ZV switch style; CE: 61058-1 and UL/c-UL: E12252, ENEC, SE/0145-3. Features
ページ8に含まれる内容の要旨
SWITCHES | 127 OP and LN Series Enclosed Basic Switches LN switches can withstand rapid hammer-blow actuation because impact on the actuating plunger cannot reach the precision switch unit inside. Individual seals around each leadwire and cover plate protect the switch cavity from condensation, oil, and dust. OP enclosed switches are precision snap-action switches sealed in rugged cast-aluminum housings. The cover and shaft seals keep out moisture and contaminants on rotary-operated switche
ページ9に含まれる内容の要旨
SWITCHES 128 | BZ Enclosed Basic Switches Honeywell’s enclosed basic switches are known for high precision and low cost. The BZE6 line is one of the most popular enclosed basic switch lines used in industry today. BZ enclosed basic switches Features u Benefits u Applications u • Momentary or maintained contact • #6 mounting screws on typical; • Packaging equipment #10 mounting screws on BZG • Cast zinc housing • Textile machinery • UL-recognized, file #E12252 • Side- or flange-mount option
ページ10に含まれる内容の要旨
SWITCHES | 129 Toggle Switches Honeywell toggle switches are designed to achieve a balance between harmonious appearance and ergonomics, and to accommodate a wide range of electrical and display designs. The switches are available in many shapes, sizes, configurations, and colors, which enable a flexible and attractive interface. Honeywell toggle switches meet severe- environment needs for rugged, cost-effective solutions. Construction features include a one-piece seal between the toggle
ページ11に含まれる内容の要旨
SWITCHES 130 | Hobbs Hour Meters These accurate and dependable meters help customers protect their investments by indicating when equipment needs to be serviced. The meters include LCD, counter, battery-controller, AC electromechanical, and DC electromechanical versions. Products are totally sealed for protection against moisture and dirt, and the rugged design provides excellent shock and vibration resistance. Features u Benefits u Applications u • Custom, CMOS-integrated circuit • Hob
ページ12に含まれる内容の要旨
SWITCHES | 131 Safety Electromechanical Products— Key-Operated, Cable Pull, and Hinge Honeywell’s safety switch product family has recently been expanded to improve our offering to OEMs. Our products offer functional yet cost-effective safety switching solutions for machines. We draw on 75 years of experience in switch manufacturing to provide outstanding safety switching solutions for your applications. Honeywell now has a complete offering of products for virtually all your safety switch
ページ13に含まれる内容の要旨
SWITCHES 132 | Rocker Switches Honeywell rocker switches are designed to achieve a balance between a harmonious appearance and ergonomics, and to accommodate a wide range of electrical and display designs. They are available in many shapes, sizes, and configurations, allowing customers to enhance manual operation with a flexible and attractive interface. Flush or panel-mount versions with silver or gold contacts meet a variety of electrical load requirements. Military-grade and environm
