Harbor Freight Tools 96618の取扱説明書

ページ1に含まれる内容の要旨

2-STEP FOOT SWITCH
Model 96618
FOOT SWITCH
Model 96619

SET uP AND INSTruCTIONS
Diagrams within this manual may not be drawn proportion.
®
Distributed exclusively by Harbor Freight Tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANuAl.
© ®
Copyright 2007 by Harbor Freight Tools . All rights reserved. No portion of
this manual or a

ページ2に含まれる内容の要旨

SPECIFIC SAFETy rulES WArNING! read all instructions before setup and use. Please note: all the warnings listed below apply to BOTH the 96618 2-Step Foot Switch and 96619 Foot Switch. Failure to follow all instructions listed below may result in electric shock and/or serious injury. 1. Do not use Foot Switch near water; switch mechanism is not insulated. 2. Inspect before use; do not use if parts are loose or damaged. 3. Do not use with any tool rated higher than 120 VAC, 15A. 4.

ページ3に含まれる内容の要旨

ページ4に含まれる内容の要旨

OPErATING INSTruCTIONS The following operating instructions are for the 96618 Foot Switch ONly : 1. Once the 2-Step Foot Switch is properly set-up, use your foot (or hand) to step or press down on the pedal once. remove your foot or hand. 2. The tool will now activate, allowing you to work with both hands. 3. To turn off the tool, press down on the pedal again. This will turn off the tool. Please note: Avoid accidental starting/stopping. Do not step on the Foot Switch