ページ1に含まれる内容の要旨
Matrix 12800 Series
Matrix 12800 Wideband, Video, Sync, and Audio Matrix Switchers
68-556-01 Rev. C
10 11
ページ2に含まれる内容の要旨
Precautions Safety Instructions • English Warning Power sources • This equipment should be operated only from the power source indicated on the product. This This symbol is intended to alert the user of important operating and maintenance equipment is intended to be used with a main power system with a grounded (neutral) conductor. The (servicing) instructions in the literature provided with the equipment. third (grounding) pin is a safety feature, do not attempt to bypass or disable it. Th
ページ3に含まれる内容の要旨
FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Class A limits are designed to provide reasonable protection against harmful interference when the equipment is
ページ4に含まれる内容の要旨
Table of Contents Chapter One • Introduction .......................................................................................................1-1 About the Matrix 12800 Switchers .................................................................................1-2 Features ............................................................................................................................................1-4 Definitions ...............................................................
ページ5に含まれる内容の要旨
Table of Contents, cont’d Programming the matrix offline (emulate mode) .............................................................3-18 Saving and restoring matrix settings ...................................................................................3-20 Creating program byte strings ..............................................................................................3-21 Ethernet operation ..................................................................................
ページ6に含まれる内容の要旨
Configuration Tab ......................................................................................................................5-5 System Configuration page .....................................................................................................5-5 Administration fields ...........................................................................................................5-6 Matrix IP settings fields ..............................................................
ページ7に含まれる内容の要旨
Table of Contents, cont’d Reoving and In m stalling the I/O Card and Setting the Audio Gain ..........6-16 Removing the I/O card ............................................................................................................6-18 Setting the default audio gain .............................................................................................6-19 Installing the I/O card .....................................................................................................
ページ8に含まれる内容の要旨
Matrix 12800 Switchers Chapter One 1 Introduction About the Matrix 12800 Switchers Features Definitions PRELIMINARY
ページ9に含まれる内容の要旨
Introduction About the Matrix 12800 Switchers The Extron Matrix 12800 Series of switchers is a family of matrix switcher basic module enclosures (BMEs) and an optional front panel controller (FPC 5000) that allows you to create video and audio matrix systems with up to 128 inputs and 128 outputs specifically tailored to meet your requirements. The Matrix 12800 Series includes: • Wideband video switcher BME — A rack mountable 10U switcher that routes video (red [R], green [G], and blue
ページ10に含まれる内容の要旨
I o FPC 5000 PRN COM4 COM3 COM2 COM1 VGA DIO AC INPU 100V T -230V Computer Matrix 12800 Wideband Video INPUTS OUTPUTS OUTPUTS 1 17 33 49 1 17 33 49 65 81 97 113 65 81 97 113 2 18 34 50 2 18 34 50 66 82 98 114 66 82 98 114 3 19 35 51 3 19 35 51 67 83 99 115 67 83 99 115 Projector 4 20 36 52 4 20 36 52 68 84 100 116 68 84 100 116 5 21 37 53 5 21 37 53 69 85 101 117 69 85 101 117 B 6 22 38 54 6 22 38 54 70 86 102 118 70 86 102 118 7 23 39 55 7 23 39 55 71 87 103 119 71 87 103 119 G 8 24 40 56 8 2
ページ11に含まれる内容の要旨
Introduction, cont’d Features Input and output connectors — All connectors are clearly labeled as either input or output for easy installation. With the Extron virtualization/control software, a visual map can be printed for easy representation of the virtual I/Os. This feature reduces the time required for setup and programming. Bandwidth — Bandwidth is a minimum of 375 MHz (-3 dB), fully loaded. This high bandwidth allows Extron switchers to switch everything from NTSC video to high-r
ページ12に含まれる内容の要旨
Operational flexibility — Operations such as input/output selection, setting of presets, and adjustment of audio levels can be performed at the front panel controller, over the primary and secondary RS-232/RS-422 links, or via the Ethernet link. The RS-232/RS-422 links allow remote control via two PCs or control systems. The Ethernet link allows multiple remote links with two levels of password protection. • Front Panel Controller — The optional FPC 5000 Front Panel Controller allows
ページ13に含まれる内容の要旨
Introduction, cont’d Operational reliability — The Matrix 12800 can support round-the-clock operation in mission-critical applications, using a combination of self-diagnosis, hot- swappable components, and optional redundant components. • Advanced computer-aided diagnostics — The Matrix 12800 performs self diagnostics, 24 hours a day, of the I/O cards, primary and redundant power supply voltages, controller cards, cooling status, and the overall functional status of the matrix. The status
ページ14に含まれる内容の要旨
• Dual redundant, hot swappable cooling fans — Four cooling fans are provided for ventilation and heat management. Fan and temperature sensors identify problems, which are reported locally with visual indications and remotely via the Ethernet and serial port links. Fans and the filter are easily replaceable through the front door with only a screwdriver required. • Field upgradable, hot swappable modular design — The architecture of the Matrix 12800 allows you to repair, upgrade, or e
ページ15に含まれる内容の要旨
Introduction, cont’d Definitions The following terms apply to Extron Matrix Switchers, and are used throughout this manual: Tie — An input-to-output connection. Set of ties — An input tied to two or more outputs. (An output can never be tied to more than one input.) Configuration — May consist of one tie or one or more sets of ties. Current configuration — The configuration that is currently being used (also called configuration 0). Global memory preset — A configuration that has been s
ページ16に含まれる内容の要旨
Matrix 12800 Switchers Chapter Two 2 Installation Installation Overview Rack Mounting the Switcher Rear Panel Connections and Settings Other Settings PRELIMINARY
ページ17に含まれる内容の要旨
Installation Installation Overview The Matrix 12800 BMEs that make up a Matrix 12800 system can be installed in a rack or a cabinet, if desired. Each BME must be connected on a daisy chain to the other BMEs in the system and cannot be separated from the other BMEs by more than 25 feet (7.6 m). The BMEs can be rack- or cabinet-mounted in any order. Give careful consideration to the location of the equipment in a room. Poor planning can result in problems. The number of cables involved c
ページ18に含まれる内容の要旨
Rack Mounting the Switcher The Matrix 12800 sync, wideband video, video, and audio BMEs are rack- mountable, 10U high, 17.5-inch wide (19-inch wide, including rack ears) metal enclosures. The appropriate rack mounting kit is included with the switcher. Rack mount the switcher as follows: UL guidelines The following Underwriters Laboratories (UL) guidelines pertain to the installation of the Matrix 12800 switcher BME into a rack. 1. Elevated operating ambient temperature — If installed in
ページ19に含まれる内容の要旨
Installation, cont’d Rear Panel Connections and Settings All connectors and switches (with the exception of the serial port protocol, baud rate, and sync termination DIP switches) are on the rear panel. Figure 2-1 shows the Matrix 12800 wideband video switcher. The sync and video switcher is housed in similar 10U enclosures. The Matrix 12800 audio switcher is housed in a similar 10U enclosure, but with 3.5 mm, 5-pole captive screw connectors. 10 9 10 INPUTS OUTPUTS OUTPUTS 1 17 33 49 1
ページ20に含まれる内容の要旨
BME 4 ADDRESS ANAHEIM, CA MADE IN USA BME 4 CAUTION For protection against risk of fire, replace only with same type and rating of fuse. ADDRESS CPU STATUS PRIMARY REDUNDANT IN SYNC POWER SUPPLIES +v -v PRIMARY OUT REDUNDANT PRIMARY AC REDUNDANT AC POWER INPUT POWER INPUT Balanced and unbalanced audio input connectors — See page 2-13. k Audio outputs connectors — See page 2-14. l FPC Comm port — (FUTURE CAPABILITY) m MCP/MKP Comm ports — See page 2-14. n Ethernet port — See page 2-1
