ページ1に含まれる内容の要旨
SAFETY SYMBOLS
PRECAUTIONS
1. INTRODUCTION
1-1.Features
1-2.Package Contents
1-3.Controls & Connectors
2. CABLE CONNECTION
2-1.Before Connecting
2-2.Connecting the Signal
Cable (D-Sub or DVI)
2-3.Connecting the Signal
Cable (ADC)
2-4.Connecting Two PCs to
the Monitor
2-5.How to remove the Tilt
Stand
This manual is checked under the browser settings shown
below. Text size can change for another one through
3. ScreenManager
browser setting.
3-1.How to use the
ScreenManager
Microsoft Int
ページ2に含まれる内容の要旨
8. SPECIFICATION 9. GLOSSARY APPENDIX/ ANHANG/ ANNEXE About TCO'03 (Applicable to gray) About TCO'99 (Applicable to black) FCC Declaration of Conformity Hinweis zur Ergonomie / Recycle Auskunft / Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
ページ3に含まれる内容の要旨
This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2004 EIZO NANAO CORPORATION All rights reserved. No part of this manual may
ページ4に含まれる内容の要旨
ScreenManager, ColorEdge and EIZO are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries. ® As an ENERGY STAR Partner, EIZO NANAO CORPORATION has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
ページ5に含まれる内容の要旨
IMPORTANT! ● This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. ● To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of the Caution Statements] If the unit begins to emit smoke, smells like something is b
ページ6に含まれる内容の要旨
Refer all servicing to qualified service personnel. Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock, or equipment damage. Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the
ページ7に含まれる内容の要旨
To avoid danger of suffocation, keep the plastic packing bags away from babies and children. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. To disconnect the power cord, grasp the plug firmly and pull. Tugging on the cord may damage and result in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so
ページ8に含まれる内容の要旨
Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock. When attaching an arm stand, please refer to the user's manual of the arm stand and install the unit securely with the enclosed screws. Not doing so may cause the unit to become unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric s
ページ9に含まれる内容の要旨
Do not block the ventilation slots on the cabinet. * Do not place any objects on the ventilation slots. * Do not install the unit in a closed space. * Do not use the unit laid down or upside down. Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment damage. Do not touch the plug with wet hands. Doing so may result in electrical shock. Use an easily accessible power outlet. This will ensure that you can disconnect the power quickly in
ページ10に含まれる内容の要旨
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen. This is due to the characteristics of the panel itself, and not the product. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer. Do not press on the panel
ページ11に含まれる内容の要旨
Thank you very much for choosing an EIZO Color Monitor. ● The exclusive use calibration software caliblates the monitor characteristics and generate colorprofile. ● Dual inputs compliant ● DVI Digital input (TMDS) compliant. ● ADC (Apple Display Connector) inputs compliant. ● [Horizontal scanning frequency] Analog: 30 - 82 kHz Digital: 30 - 65 kHz [Vertical scanning frequency] Analog: 49 - 86 Hz Vertical (1280 x 1024: 49 - 75 Hz) Digital: 59 - 61 Hz (VGA text: 69 - 71
ページ12に含まれる内容の要旨
* LCD Monitor * User's Manual (in the CD-ROM) * Power Cord * Calibration software "ColorNavigator" (in the CD-ROM) * Signal Cable (FD-C35/FD-C39) * Setup Guide * Signal Cable (FD-C16) * ColorNavigator Quick Reference * EIZO USB Cable (MD-C93) * LIMITED WARRANTY * EIZO LCD Utility Disk * Adjustment Certificate * Please retain the packing materials for future transference. Front
ページ13に含まれる内容の要旨
® (1) ScreenManager (2) Main Power Switch (3) Input Signal Selection Button *1 (4) Mode Button (5) Auto Adjustment Button (6) Enter Button *2 (7) Control Buttons (Up, Down, Left, Right) (8) Power Button *3 (9) Power Indicator Blue Operation Yellow Power saving Flashing yellow Power save mode Digital only (2 times for each) Flashing yellow slowly Power is off (Main power is on) Off Power off *1 Pressing the Mode button once allows you to display a FineContrast menu. Pressing the Mode button mo
ページ14に含まれる内容の要旨
*4 (10) Height Adjustable Stand (Detachable) *5 (11) Security Lock Slot (12) DVI-I Input Connector (SIGNAL 1, SIGNAL 2) (13) USB Port (1 Upstream) (14) USB Port (2 Downstream) (15) Power Connector *4 The LCD monitor has the capability of the Portrait/Landscape display. (The panel pivots in the clockwise direction 90°.) The LCD monitor can be used with an optional arm stand by removing the stand. (see "2-5. How to remove the Tilt Stand"). *5 Allows for connection of a security cable. Thi
ページ15に含まれる内容の要旨
Before connecting your monitor to the PC, change the display screen settings (resolution and frequency) in accordance with the charts below. * When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings. Analog Input Resolution Frequency Dot Clock Remarks 640 x 480 ~ 85 Hz VGA, VESA 640 x 480 67 Hz Apple Macintosh 720 x 400 70 Hz VGA TEXT 720 x 480 60 Hz VESA 800 x 600 ~
ページ16に含まれる内容の要旨
Digital Input The monitor supports the following resolutions only. Resolution Frequency Dot Clock Remarks 640 x 480 60 Hz VGA 720 x 400 70 Hz VGA TEXT 720 x 480 60 Hz VESA Safe Mode 108 MHz (Max.) 800 x 600 60 Hz VESA 1024 x 768 60 Hz VESA 1280 x 1024 60 Hz VESA * Be sure that the power switches of both the PC and the monitor are OFF. 1.Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, se
ページ17に含まれる内容の要旨
Signal Cable Connector PC Signal Cable (FD-C16 Video Output Standard graphics card enclosed) Connector D-Sub 15 Macintosh G3 (Blue & pin White) /Power Mac G4 (VGA) Input Connector (monitor) / DVI Signal Cable (FD-C16 Video Output Macintosh enclosed) + Macintosh Connector D-Sub 15 Adapter (Optional) pin Input Connector (monitor) / DVI Digital Input Signal Cable Connector PC Signal Cable (FD-C35/FD- Video Output Digital graphics card C39 enclosed) Connector / DVI Power Mac G4 / G5 (DVI) I
ページ18に含まれる内容の要旨
* The cables are recommended to lead with slight sag for the smooth motion of the stand and the Portrait/Landscape display. 4.Plug the other end of the power cord into a power outlet. The monitor's power indicator will flash yellow slowly. WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. The equipment must be connected to a grounde
ページ19に含まれる内容の要旨
5.Turn on the monitor's power button and then switch on the PC's power. The monitor's power indicator will light up (blue). If an image does not appear, refer to the "6. TROUBLESHOOTING" for advice. Whenever finished, turn off the PC and the monitor. * When turning on the monitor, the kid of the input signal (Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen. * Adjust brightness of the screen depending on the brightness of your environment. *
ページ20に含まれる内容の要旨
Signal Cable Connector PC Signal Cable (FD-C35/FD- Video Output Power Mac G4 / G5 (ADC) C39 enclosed) +ADC-DVI Connector / ADC display adapter Input Connector (commercially available) (monitor) / DVI * ADC-DVI display adapter is required if the monitor connects to Power Mac G4 / G5. The adapter is commercially available. 2.Plug the power cord into the power connector on the rear of the monitor. 3.Lead the power cord and signal cable into the cable holder at rear of the monitor. * The ca
