ページ1に含まれる内容の要旨
Dell™ PowerConnect™ 6024/6024F Systems
User’s Guide
www.dell.com | support.dell.com
ページ2に含まれる内容の要旨
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. ____________________ Information in this document is subject to change without notice. © 2005 Dell Inc. All rights reserved. Reproduction in any manner whatsoever wi
ページ3に含まれる内容の要旨
Contents 1 Introduction PowerConnect 6024 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PowerConnect 6024F. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 CLI Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Port Based Features. . . . . . . . . . . . . . . . . . . . . . . . . . 24 MAC Address Supported Features . . . . . . . . . . . . . . . . . . . 26 Layer 2 Features .
ページ4に含まれる内容の要旨
3 Cable, Port, and Pinout Information Pin Connections for the 10/100/1000 Ethernet Interface . . . . . . . . . . . 45 Pin Connections for SFP Interfaces . . . . . . . . . . . . . . . . . . . . . 46 Serial Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Connecting the Switch to a Terminal . . . . . . . . . . . . . . . . . . 48 AC Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 4 Using Dell OpenManage Switch Administrator Starting the Application .
ページ5に含まれる内容の要旨
Booting the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Configuration Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Initial Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Advanced Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Retrieving an IP Address From a DHCP Server . . . . . . . . . . . . . 70 Receiving an IP Address From a BOOTP Server. . . . . . . . . . . . . 71 Security Management and Password Configu
ページ6に含まれる内容の要旨
6 Configuring System Information Opening the System Page . . . . . . . . . . . . . . . . . . . . . . . . . 99 Defining General Device Information . . . . . . . . . . . . . . . . . . . . 99 Configuring Device Information . . . . . . . . . . . . . . . . . . . . 99 Defining System Time Settings . . . . . . . . . . . . . . . . . . . . 102 The following is an example of CLI commands: . . . . . . . . . . . . 105 Configuring System Health Information. . . . . . . . . . . . . . . . 105 The following
ページ7に含まれる内容の要旨
Running Cable Diagnostics. . . . . . . . . . . . . . . . . . . . . . . . 166 Viewing Copper Cable Diagnostics. . . . . . . . . . . . . . . . . . 166 Viewing Optical Transceiver Diagnostics . . . . . . . . . . . . . . . 168 Managing Device Security. . . . . . . . . . . . . . . . . . . . . . . . 170 Defining Access Profiles . . . . . . . . . . . . . . . . . . . . . . 170 Defining Authentication Profiles . . . . . . . . . . . . . . . . . . . 175 Selecting Authentication Profiles . . . . . . .
ページ8に含まれる内容の要旨
Configuring Port Security . . . . . . . . . . . . . . . . . . . . . . 242 Defining IP based ACLs . . . . . . . . . . . . . . . . . . . . . . . 245 Defining MAC based ACLs. . . . . . . . . . . . . . . . . . . . . . 250 Configuring ACL Binding. . . . . . . . . . . . . . . . . . . . . . . 253 Configuring Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256 Defining Port Configuration . . . . . . . . . . . . . . . . . . . . . 256 Defining LAG Configuration . . . . . . . . . . . .
ページ9に含まれる内容の要旨
8 Configuring Routing Routing Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331 Configuring Global IP Routing . . . . . . . . . . . . . . . . . . . . . . 331 Configuring the IP Forwarding Table . . . . . . . . . . . . . . . . . 331 Configuring IP Static Routes . . . . . . . . . . . . . . . . . . . . . 334 Configuring VRRP . . . . . . . . . . . . . . . . . . . . . . . . . . 336 Configuring MD5 Routing Authentication . . . . . . . . . . . . . . . 340 Configuring MD5 Key Ch
ページ10に含まれる内容の要旨
Viewing Interface Statistics . . . . . . . . . . . . . . . . . . . . . 391 Viewing Etherlike Statistics . . . . . . . . . . . . . . . . . . . . . 395 Viewing GVRP Statistics. . . . . . . . . . . . . . . . . . . . . . . 397 Viewing EAP Statistics . . . . . . . . . . . . . . . . . . . . . . . 400 Viewing RMON Statistics . . . . . . . . . . . . . . . . . . . . . . . . 402 Viewing RMON Statistics Group . . . . . . . . . . . . . . . . . . . 402 Viewing RMON History Control Statistics. . . . . .
ページ11に含まれる内容の要旨
11 Getting Help Technical Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . 465 Online Services . . . . . . . . . . . . . . . . . . . . . . . . . . . 465 AutoTech Service . . . . . . . . . . . . . . . . . . . . . . . . . . 466 Automated Order-Status Service. . . . . . . . . . . . . . . . . . . 466 Technical Support Service. . . . . . . . . . . . . . . . . . . . . . 466 Dell Enterprise Training and Certification. . . . . . . . . . . . . . . . . 467 Problems With Your Order . .
ページ12に含まれる内容の要旨
12 Contents
ページ13に含まれる内容の要旨
Console (RS-232) SFP Ports Base-TPorts SFP Ports Base-TPorts System Reset Button LEDS Out of Band Introduction NOTICE: Before proceeding, read the release notes for this product. You can download the release notes from support.dell.com. The Dell™ PowerConnect™ 6024/6024F is a standalone Layer 3 switch that extends the Dell PowerConnect LAN switching product range. The switch includes the following features: 1U form factor, rack-mountable chassis design Out-of-band management port for RJ
ページ14に含まれる内容の要旨
PowerConnect 6024F PowerConnect 6024F provides 24 SFP ports with 8 10/100/1000 Base-T RJ-45 combo ports that have an auto-sensing mode for speed, flow control, and duplex mode. SFP transceivers are sold separately. Figure 1-2. PowerConnect 6024F CLI Documentation Console (RS-232) Base-T Ports SFP Ports 1 359 7 11 13 15 17 19 21 23 17 19 21 23 2 4 6 8 10121416 18202224 18 20 22 24 Base-T Ports SFP Ports System LEDs Reset Button Out of Band The CLI Reference Guide provides information about th
ページ15に含まれる内容の要旨
Standard wiring for end stations is Media-Dependent Interface (MDI) and the standard wiring for hubs and switches is known as Media-Dependent Interface with Crossover (MDIX). For information about configuring MDI/MDI for ports or LAGs, see "Defining Port Configuration" or "Defining LAG Configuration." Hardware Watchdog Support The switch uses Hardware Watchdog to detect issues and take corrective action when the software stops responding. Auto Negotiation Auto negotiation allows the device to
ページ16に含まれる内容の要旨
MAC Address Supported Features MAC Address Support The switch supports up to 16K MAC addresses and reserves specific MAC addresses for system use. Self-Learning MAC Addresses The switch enables MAC addresses to be automatically learned from incoming packets. Automatic Aging for MAC Addresses MAC addresses that have not seen any traffic for a given period are aged out, which prevents the Bridging Table from overflowing. For information about configuring the MAC Address age-out period, see "Viewi
ページ17に含まれる内容の要旨
For information about configuring port mirroring, see "Defining Port Mirroring Sessions." Broadcast Storm Control When Layer 2 frames are forwarded, broadcast and multicast frames are flooded to all ports on the relevant VLAN. The flooding occupies bandwidth, and loads all nodes connected on all ports. Storm control limits the amount of multicast and broadcast frames accepted and forwarded by the switch. For information about configuring storm control, see "Enabling Storm Control." VLAN Suppo
ページ18に含まれる内容の要旨
Private VLAN Edge Private VLAN Edge (PVE) ports are a Layer 2 security feature that provides port-based security between adjacent ports within a VLAN. It is an extension of the common VLAN. Traffic from protected ports is sent only to the uplink ports and cannot be sent to other ports within the VLAN. For information about configuring PVE ports, see "Configuring Ports". Spanning Tree Protocol Features Spanning Tree Protocol (STP) per Device 802.1d STP is a standard requirement of Layer 2 swit
ページ19に含まれる内容の要旨
Link Aggregation Link Aggregation Up to seven ports can combine to form a single Link Aggregated Group (LAG). This enables fault tolerance protection from physical link disruption, higher bandwidth connections and improved bandwidth granularity. A LAG is composed of ports of the same speed, set to full-duplex operation. For information about configuring LAGs, see "Defining LAG Configuration." Link Aggregation and LACP LACP uses peer exchanges across links to determine, on an ongoing basis, th
ページ20に含まれる内容の要旨
Address Resolution Protocol (ARP) In IP routing, routers and Layer 3 switches use various routing protocols to discover network topology and define routing tables. ARP automatically determines Device Next-Hop MAC addresses of systems, including directly attached end systems. Users can override and supplement this by defining additional ARP table entries. For information about configuring ARP, see "Defining ARP Settings." ICMP Messages Internet Control Message Protocol (ICMP) messages are used
