ページ1に含まれる内容の要旨
DES-3226
Managed Standalone Fast Ethernet Switch
User’s Guide
Second Edition (July 2002)
651ES3226025
Printed In Taiwan
RECYCLABLE
ページ2に含まれる内容の要旨
Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Um eine Beschädigung des Gerätes zu vermeiden sollten Sie nur Zubehörteile verwenden, die vom Hersteller zugelassen sind. 5. Das Gerät is vor Feuchtigkeit zu schützen. 6.
ページ3に含まれる内容の要旨
Trademarks Copyright D-Link Corporation 2002. Contents subject to change without prior notice. D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks belong to their respective proprietors. Copyright Statement No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as stipulated b
ページ4に含まれる内容の要旨
software products will work in combination with any hardware, or any application or system/platform software product provided by any third party, excepting only such products as are expressly represented, in D-Link's applicable product documentation as being compatible. D-Link's obligation under this warranty shall be a reasonable effort to provide compatibility, but D-Link shall have no obligation to provide compatibility when there is fault in the third-party hardware or software. D-Lin
ページ5に含まれる内容の要旨
Attenzione! Il presente prodotto appartiene alla classe A. Se utilizzato in ambiente domestico il prodotto può causare interferenze radio, nel cui caso è possibile che l`utente debba assumere provvedimenti adeguati. VCCI Warning BSMI Warning
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Table of Contents About This Guide .................................................................................................................................. 1 Overview of this User’s Guide ............................................................................................................. 1 Introduction.......................................................................................................................................... 2 Features ....................
ページ8に含まれる内容の要旨
Tagging and Untagging................................................................................................................... 31 Ingress Filtering ............................................................................................................................. 31 VLANs............................................................................................................................................ 32 DHCP ......................................................
ページ9に含まれる内容の要旨
Port LACP Trunking ....................................................................................................................... 97 IGMP Snooping .............................................................................................................................. 98 Port GMRP ................................................................................................................................... 100 Diffserv Settings..............................................
ページ10に含まれる内容の要旨
Packet Corruption........................................................................................................................ 160 Resource Errors ........................................................................................................................... 160 Identifying a Data Loop ................................................................................................................ 160 Avoiding Trouble ...................................................
ページ11に含まれる内容の要旨
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide ABOUT THIS GUIDE This User’s Guide tells you how to install your DES-3226, how to connect it to your Ethernet/Fast Ethernet/Gigabit Ethernet network, and how to set its configuration using the built-in console interface. Overview of this User’s Guide • Chapter 1, “Introduction.” Describes the Switch and its features. • Chapter 2, “Unpacking and Setup.” Helps you get started with the basic installation of the Switch. • Chapter 3,
ページ12に含まれる内容の要旨
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide 1 INTRODUCTION This section describes the features of the DES-3226. Features The Switch was designed for easy installation and high performance in an environment where traffic on the network and the number of users increases continuously. Switch features include: Ports • 24 (DES-3226) high performance NWay (MDI-II/MDI-X) ports for connecting to end stations, servers and hubs. Every port can be used for an uplink connection.
ページ13に含まれる内容の要旨
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide • Data filtering rate eliminates all error packets, runts, etc. at 14,880 pps per port at 100% of wire- speed for 10Mbps speed. • Data filtering rate eliminates all error packets, runts, etc. at 148,800 pps per port at 100% of wire-speed for 100Mbps speed. • 8K active MAC address entry table per device with automatic learning and aging (10 to 1000000 seconds). • 8 MB packet buffer per device. • 802.1D Spanning Tree support. • 802
ページ14に含まれる内容の要旨
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide 802.1X MIB Enterprise MIB Mini-RMON MIB (RFC 1757) – 4 groups. The RMON specification defines the Counters for the Receive functions only. However, the DES-3226 implements counters for both receive and transmit functions. • Supports Web-based management. • TFTP support. • BOOTP support. • DHCP Client support. • Password enabled. • Telnet remote control console support. 4
ページ15に含まれる内容の要旨
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide 2 UNPACKING AND SETUP This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: • One DES-3226 24-Port NWay Standalone Fast Ethernet Switch • Mounting kit: 2 mounting brackets and screws • Four rubber feet with adhesive backing • One AC power cord • This User’s Guide with Registration
ページ16に含まれる内容の要旨
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide Figure 2-1. Installing rubber feet for desktop installation Rack Installation The DES-3226 can be mounted in an EIA standard-sized, 19-inch rack, which can be placed in a wiring closet with other equipment. To install, attach the mounting brackets on the Switch’s side panels (one on each side) and secure them with the screws provided. Figure 2- 2A. Attaching the mounting brackets to the Switch Then, use the screws provi
ページ17に含まれる内容の要旨
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide Figure 2-2B. Installing the Switch in an equipment rack Power on The Switch can be used with AC power supply 100-240 VAC, 50 - 60 Hz. The Switch’s power supply will adjust to the local power source automatically and may be powered on without having any or all LAN segment cables connected. After the Switch is plugged in, the LED indicators should respond as follows: • All LED indicators will momentarily blink. This blinking of
ページ18に含まれる内容の要旨
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide 3 IDENTIFYING EXTERNAL COMPONENTS This chapter describes the front panel, rear panel, side panels, optional plug-in modules, and LED indicators of the DES-3226. Front Panel The front panel of the Switch consists of LED indicators, an RS-232 communication port, a slide-in module slot, and either 10, 18 or 24 MDI-X/MDI-II Ethernet/Fast Ethernet (10/100 Mbps) ports, each of which is capable of making an uplink connection. Figure
ページ19に含まれる内容の要旨
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide • The AC power connector is a standard three-pronged connector that supports the power cord. Plug-in the female connector of the provided power cord into this socket, and the male side of the cord into a power outlet. Supported input voltages range from 100 ~ 240 VAC at 50 ~ 60 Hz. Side Panels The right side panel of the Switch contains two system fans (see the top part of the diagram below). The left side panel contains heat vents
ページ20に含まれる内容の要旨
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide 100BASE-FX Module (2Km) Figure 3-4. Optional 100BASE 1-port front panel module • One 100BASE-FX (with SC type connector) Fiber port. • Fully compliant with IEEE802.3u. • Support Full-duplex operation only. • IEEE 802.3x compliant Flow Control support for full duplex. 100BASE-FX Module (2Km) Figure 3-5. Optional 100BASE 2-port front panel module • Two 100BASE-FX (with SC type connector) Fiber ports. • Fully compliant wit
