ページ1に含まれる内容の要旨
MOD HUB series
A Line of Modular Active Hubs for ARCNET®
Local Area Networks
Expansion Modules
Installation Instructions
#TD471100-0II
ページ2に含まれる内容の要旨
Trademarks Contemporary Controls, ARC Control, ARC DETECT and EXTEND-A-BUS are trademarks or registered trademarks of Contemporary Control Systems, Inc. ARCNET is a registered trademark of Datapoint Corporation. Other product names may be trademarks or registered trademarks of their respective companies. TD471100-0II Revised 09-15-03 Copyright © Copyright June 1996, 1999, 2003, by Contemporary Control Systems, Inc. All rights reserved. No part of this publication may be reproduced, transmitt
ページ3に含まれる内容の要旨
INTRODUCTION This document provides instructions for installing and removing expansion modules to be used in the MOD HUB series of modular ARCNET active hubs. More detailed information regarding the MOD HUB Series can be obtained by referring to Contemporary Controls’ MOD HUB Series User Manual. CABLING CONSIDERATIONS The MOD HUB Series is a line of modular active hubs for ARCNET local area networks. These hubs support several cabling types including coaxial, twisted-pair and glass fiber optics.
ページ4に含まれる内容の要旨
Model Number Description EXP-CXS 4-port coaxial star expansion module EXP-CXS/FG3-ST Coax/1300 nm fiber expansion module EXP-CXS/FOG-SMA 2-port coax/fiber SMA expansion module EXP-CXS/FOG-ST 2-port coax/fiber ST expansion module EXP-CXS/485 2-port coax/485 expansion module EXP-CXS/485X 2-port coax/485X expansion module EXP-FOG-SMA 4-port fiber SMA expansion module EXP-FOG-ST 4-port fiber ST expansion module EXP-TPS 4-port twisted-pair expansion module EXP-TPS/CXS 2-port twisted-pair/coax expansi
ページ5に含まれる内容の要旨
REMOVING MODULES FROM THE MOD HUB Before removing the modules from the MOD HUB, turn the unit off by depressing the power switch located on the front panel of the MOD HUB. Unplug the power cord from the wall outlet. Disconnect the cables from the connectors on the module that is being removed. Dislodging Modules From The MOD HUB Loosen the module from the MOD HUB unit by unscrewing both of the captive screws with your fingers. The captive screws are located on each end of the module. Loosen the
ページ6に含まれる内容の要旨
Tighten the captive screws on the module panel with your fingers and fasten them in the locking position. Attach the cables running from each device in the ARCNET LAN to the appropriate module connectors on the newly- installed expansion module. Refer to the MOD HUB Series User Manual, Chapter 2, to test the module for proper working operation. TD471100-0II 4
ページ7に含まれる内容の要旨
APPENDICES Appendix A–Declaration of Conformity Applied Council Directives: Low Voltage Directive 72/23/EEC Council Directive as amended by Council Directive 93/68/EEC Electromagnetic Compatibility Directive, 89/336/EEC Council Directive as amended by Council Directive 92/31/EEC & Council Directive 93/68/EEC Standard to which Conformity is Declared EN 55022:1995 CISPR22: 1993, Class A, Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment EN 5
ページ8に含まれる内容の要旨
Type of Equipment: Industrial local area network modular hub and associated expansion modules Directive * Model EMC LVD MODHUB-16E Yes Yes MODHUB-16EF Yes Yes EXP-CXS Yes N/R EXP-CXS/FG3-ST Yes N/R EXP-CXS/FOG-SMA Yes N/R EXP-CXS/FOG-ST Yes N/R EXP-FOG-SMA Yes N/R EXP-FOG-ST Yes N/R EXP-TPS Yes N/R EXP-TPS/FOG-ST Yes N/R * Yes — product is certified to this directive N/R — this directive is not required for this product Year of CE Marking (low voltage directive) May 1996 Techn
