ページ1に含まれる内容の要旨
1.800.860.7466
Notice
Wireless LAN Enclosure for
Cisco Aironet 1200
Ceiling Installation Guide
© Copyright Champion Computer Technologies 2003. All rights reserved.
All other trademarks mentioned in this document are the property of their respective owners.
Reproduction, adaptation, or translation of this manual is prohibited without prior written
permission of Champion Computer Technologies, except as allowed under copyright laws.
CCT WLANE Installation Guide
UPGRADING THE NETWORK WORLD™
Fi
ページ2に含まれる内容の要旨
Table of Contents Description The WLANE-C is a secure, rugged, and lightweight (less than Description 9 lbs.) enclosure for ceiling mount installations of Wireless Parts List Access Points. It offers security for both 802.11a and b Tools Needed installations now, and in the future through user upgradeable Installation attachments. Obtaining Technical Assistance Terms & Conditions The WLANE-C can be installed in less than 15 minutes by Return Procedures simply cutting an 8" x 6" hole in
ページ3に含まれる内容の要旨
Part Lists for Ceiling Installation Tools Needed for Installation of the WLANE-C Table 1 WLANE-CBD • 802.11b Dipole Includes CCT Upgrades P/N Description of Upgrade • Screwdriver •WLANE Chassis •WLANE-DIPOLE •11b Dipole Antenna • Measuring Tape •Locking Baffle 802.11b •HARNESSWLC •Locking Wire Harness • Utility Knife •Grommets (2 pcs.) •CBA •11a, 11b Plain Baffle • Ladder •Dipole Cable Extender Kit •2' T, T-Screws, Wire WLANE-CBO • 802.11b Omni Note: You should have done a wireless site inspecti
ページ4に含まれる内容の要旨
Installation of the WLANE-C Installation of the WLANE-C Step 1: Unpack the box, check for all components. Step 2: Make sure the Enclosure is on a level surface. Extend Step 5: Place enclosure through the hole and make sure the T- T-bars and adjust them to 3/4" from the bottom of the T. See bars are resting on the Ts. See figure 3. figure 1. If the Enclosure is not at proper height, adjustments can be made by loosening and moving the T bars to the appropriate height. 8" T Braces 21" 6"
ページ5に含まれる内容の要旨
Installation of the WLANE-C Installation of the WLANE-C Step 9: Mount Access Point on upper mounting holes. See figure 7. Step 7: Install Ethernet cable, secure using cable ties. See figure 5. Upper Three Holes Figure 7 Step 10: Attach dipole or omni antennas to cable extenders. Let them dangle out of the box. See figure 8. Figure 5 Step 8: For 802.11a only, skip to Step 9. For 802.11b, attach Cable Extender Dipole Antenna included cable extenders to 802.11b connectors on your Access
ページ6に含まれる内容の要旨
Installation of the WLANE-C Obtaining Technical Assistance Step 13: Attach the locking baffle place on the end with a Z shaped join, then push up on the end with the two posts. You SPECIFICATIONS may have to push the tile up to get the Z shaped join to sit Materials Aluminum and steel case with coaxial cable, correctly. Not all tiles are the same thickness, nor are the plenum approved. heights of the T Frame. See figure 12. 8" x 11" x 6" Size (802.11a) 9 lbs. (not including access
ページ7に含まれる内容の要旨
Terms & Conditions Return Procedures Warranty One year No product may be returned for any reason without the prior approval of Champion Computer Technologies. Customer is responsible for returning products to Limitations Champion Computer Technologies at customer's risk and expense. Prior to returning Not covered under the warranties are: failures due to accident, misuse, abuse, product(s) to Champion Computer Technologies for warranty service, customer neglect, improper installation, produ
