ページ1に含まれる内容の要旨
KVM Switch
Belkin Tech Support Belkin B.V.
US: 310-898-1100, ext. 2263 Boeing Avenue 333
800-223-5546, ext. 2263 1119 PH Schiphol-Rijk,
UK: 0845 607 77 87 The Netherlands
Australia: 1800 235 546 +31 (0) 20 654 7300
New Zealand: 0800 235 546 +31 (0) 20 654 7349 fax
Singapore: 800 616 1790
Europe: www.belkin.com/support Belkin Ltd.
4 Pioneer Avenue
Belkin International, Inc. Tuggerah Business Park
501 West Walnut Street Tuggerah, NSW 2259, Australia
Los Angeles, CA 90220, USA +61 (0) 2 4350 4600
ページ2に含まれる内容の要旨
KVM Switch User Guide F1DK102P
ページ3に含まれる内容の要旨
ページ4に含まれる内容の要旨
Package Contents • 2-Port KVM Switch with Cabling (PS/2) • User Guide Introduction Congratulations and thank you for purchasing the Belkin 2-Port KVM Switch with Cabling. The Switch is easy to set up and use, and comes with everything you need to share one monitor, keyboard, and mouse between your two computers. No additional cables or software are required. The diagram below shows a typical KVM Switch setup. Your monitor, keyboard, and mouse connect to the Switch. The Switch is connected
ページ5に含まれる内容の要旨
System Requirements Monitor The Switch supports LCD and CRT monitors with VGA connections. You can also use your DVI-I monitor with the Switch by connecting a VGA adapter to the DVI cable. The Switch does not support direct DVI connections from monitors. VGA connection Keyboard/Mouse The Switch supports PS/2-based keyboards and mice. PS/2 connection Computers The Switch can be used with desktop or notebook computers that support PS/2 keyboard and mouse connections, and that run on one of
ページ6に含まれる内容の要旨
Installing your Switch Before you begin, make sure that both computers are powered off. 1. Connect your monitor, keyboard, and mouse to the Switch. Installing your Switch 3
ページ7に含まれる内容の要旨
2. Connect the cables to the monitor, keyboard, and mouse ports on your two computers. 3. Power on your computers. You are now ready to use your Switch. 4 Installing your Switch
ページ8に含まれる内容の要旨
Using your Switch When you power up your computers, your first computer’s desktop will appear on your monitor. You are now ready to use that computer as if it were directly connected to your monitor, keyboard, and mouse. To switch access to your other computer, press the “SCROLL LOCK” key twice on your keyboard, followed by the up arrow key. Your other computer’s desktop will appear on your monitor. You are now ready to use your other computer as if it were directly connected to your mon
ページ9に含まれる内容の要旨
FAQs What operating systems does the Switch support? The Switch supports Windows 2000, XP, 2003, and Vista; and Linux. What type of mice does the Switch support? The Switch supports PS/2 mice from many manufacturers including ® ® ® Belkin, Microsoft , Logitech , and Kensington . What is the maximum video resolution the Switch supports? The advanced video circuit in the Switch supports a maximum resolution of 2048x1536@65Hz. Can I use my DVI-I monitor with the Switch? Yes, you can use a DVI
ページ10に含まれる内容の要旨
Does the Switch allow me to transfer files from one computer to another computer? No, the Switch allows you to share peripherals between computers (monitor, keyboard, and mouse). To share or transfer files between computers, you will need a networking switch. Does the Switch require an AC adapter? No, no additional power supply is required for the Switch to function properly. Can I use the Switch to switch video signals only? No, the Switch requires power from the PS/2 ports in order to op
ページ11に含まれる内容の要旨
Troubleshooting Monit Monitor or Support Support I am getting ghosting, shadowing, or fuzzy images on my monitor. • Check that all video cables are inserted properly. • Check that the monitor you are using supports the resolution and refresh-rate setting on your computer. • Check that the graphics card you are using supports the resolution and refresh-rate setting on your computer. • Connect the monitor directly into the computer with which you are having trouble to see if the problem s
ページ12に含まれる内容の要旨
Mouse Mouse Support Support My mouse is lost when I switch to a different computer. • Check that your mouse cable is connected properly to the Switch. Tighten any loose connections. • Attach the mouse directly to the computer with which you are experiencing mouse problems. • Allow up to one minute after your computer wakes up from standby mode for mouse function to return. • Deactivate power management schemes on the computer with which you are experiencing problems. • Try swapping t
ページ13に含まれる内容の要旨
Gener General al Support Support My computer does not boot up when connected to the Switch, but works fine when I connect the monitor, keyboard, and mouse directly to it. • Make sure that the keyboard and mouse cables are connected tightly between the Switch and the computer. • Check that the keyboard and mouse cables are not crossed, i.e., make sure the connectors are plugged into the correct ports. 10 Troubleshooting
ページ14に含まれる内容の要旨
FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 501 West Walnut Street, Compton CA 90220, declare under our sole responsibility that the product F1DK102P, to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference tha
ページ15に含まれる内容の要旨
How to get service. To get service for your Belkin product you must take the following steps: 1. Contact Belkin International, Inc., at 501 W. Walnut St., Compton CA 90220, Attn: Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be prepared to provide the following information: a. The part number of the Belkin product. b. Where you purchased the product. c. When you purchased the product. d. Copy of original receipt. 2. Your Belkin Customer Service Representat
ページ16に含まれる内容の要旨
