ページ1に含まれる内容の要旨
car audio
power amplifier
owner’s manual
THANK YOU
for purchasing a JBL CS Series amplifier. In order that
we may better serve you should you require warranty
service for your new amplifier, please retain your
original purchase receipt and return the enclosed
warranty registration card.
ページ2に含まれる内容の要旨
INSTALLATION WARNING: Playing loud music in an • Before drilling or cutting holes, use a POWER CONNECTIONS Remote Connection automobile can hinder your ability to hear utility knife to remove unwanted fabric The CS amplifiers require a reliable Connect the amplifier’s Remote (REM) traffic and permanently damage your or vinyl to keep material from snagging connection to the vehicle’s electrical terminal to the source unit’s Remote Turn- hearing. We recommend listening at low or in a drill bit.
ページ3に含まれる内容の要旨
APPLICATIONS – CS200.1 The CS subwoofer amplifier is a single-channel amplifier. There are two sets of terminals to make it easy to connect multiple woofers. Either set of (+/–) terminals may be used when connecting woofers. To the right are two application diagrams to help plan your subwoofer system installation. Figures 2 and 3 show how to configure the CS200.1 subwoofer amplifier. NOTE: For simplicity, Figures 2 and 3 do not show power, remote and input connections. Figure 2. CS subwo
ページ4に含まれる内容の要旨
CONTROLS AND SETUP SPECIFICATIONS Declaration of Conformity SETTING THE SETTING INPUT CS200.1 CROSSOVER(S) SENSITIVITY • 236W RMS x 1 channel at 4 ohms and ≤1% THD + N Determine your system plans and set 1. Initially turn the INPUT LEVEL control(s) • Signal-to-noise ratio: 100dBA (reference 1W into 4 ohms) the crossover mode switch accordingly. to minimum (counter clockwise). We, Harman Consumer International • 338W RMS x 1 channel at 2 ohms, 14.4V supply and ≤1% THD + N 2, route de Tours If you
