ページ1に含まれる内容の要旨
SPLIT-DVI Series
User’s Guide
Models
Split-DVI-2
Models
Split-DVI-5
© 2008 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license,
ページ2に含まれる内容の要旨
Table of Contents Section 1: Getting Started ...................................................................................................................... 3 1.1 Important Safeguards ............................................................................................................ 3 1.2 Safety Instructions ................................................................................................................. 3 1.3 Regulatory Notices Federal Communications Commi
ページ3に含まれる内容の要旨
Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover Any product, on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from: Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions
ページ4に含まれる内容の要旨
1.4 Introduction Avenview SPLIT-DVI-2 / SPLIT-DVI-5 DVI Distribution System lets your one digital video signal (Set-Top boxes, DVD Player or PC) with DVI output and distributes it to two or more digital displays such as PC Monitor, HDTV, or Projector. - Supports both PC Monitor and HDTV display by function switch - Supports HDCP compliant device - Compatible with DVI Standard by DDWG - The use of standard DVI-D Plug - Support 480i, 480p, 720i, 720p, and 1080i resolution for HDTV - Sup
ページ5に含まれる内容の要旨
1.7 Installation The installation of SPLIT-DVI-2 or SPLIT-DVI-5 is simple: 1. Power off display source such as DVD Player, Set-top box 2. Connect the DVI cable into each display source and display 3. Connect DVI cable which is attached to display source into SPLIT-DVI-2 or SPLIT-DVI-5 4. Connect Power to SPLIT-DVI-2 or SPLIT-DVI-5 5. For HDTV Signal select HDTV from Function Switch and for PC Signal select PC HDTV Signal PC Signal www.avenview.com 5
ページ6に含まれる内容の要旨
1.8 General Troubleshooting Problem Possible Solution Check if connection to the computer and the monitor are correct. No Image Ensure that Source device is connected Check to see if cables are connected properly This product supports up to WUXGA resolution. Screen Defects Appear Check the DVI connection Check the maximum resolution range of the graphics card. Section 2: Specifications Item Description Video Bandwidth 165MHz (Single Link) Connector DVI-D Re
ページ7に含まれる内容の要旨
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequentia
