SMC Networks Flow Sensor PFMV5の取扱説明書

ページ1に含まれる内容の要旨

Flow Sensor
IMPORTANT MESSAGES
Read this manual and follow its instructions. Signal words such
Instruction Manual
as WARNING, CAUTION and NOTE, will be followed by
important safety information that must be carefully reviewed.
PFMV5 Series
Indicates a potentially hazardous situation
which could result in death or serious injury
if you do not follow instructions.
Indicates a potentially hazardous situation
which if not avoided, may result in minor
injury or moderate injury.
Gives you helpful info

ページ2に含まれる内容の要旨

FLOW SENSOR FLOW SENSOR FLOW SENSOR FLOW SENSOR L-type bracket L-type bracket (Tapped) (Tapped) L-type bracket (Through hole) • Prepare maintenance space. Dimensions and Names of Individual Parts (unit: mm) • Do not drop or bump, or apply excess impact. • Do not pull the lead wire forcefully, not lift the product by pulling the lead wire. (Tensile force 49N or less). 34.4 0.8 • Mount a sensor by observing the proper tightening torque. • Install or connect the flow sensor so that the flow directi

ページ3に含まれる内容の要旨

Flow characteristic chart (Reference) Mounting and Installation (unit: mm) Mount on direct Mount on one side PFMV5(05/10/30) 5.0 4.5 Mounting screw (M3 x 15L) 4.0 3.5 L-type bracket (Tapped) 3.0 2.5 Mounting screw 2.0 1.5 1.0 Mount on both sides 0.5 0.0 L-type bracket 0% 20% 40% 60% 80% 100% (Through hole) Maximum rated flow L-type bracket Flow (Tapped) Mounting screw (M3 x 15L) PFMV5(05/10/30)F 5.0 4.5 Thread tightening torque is 0.32 0.02N•m. 4.0 Manifold mount (using ZS-36-A ) 3.5 3.0 2