ページ1に含まれる内容の要旨
CD-ES900_99(U) TINSEA002AWZZ
1
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
CD-ES900 Mini Component System consisting of CD-ES900 (main unit)
and CP-ES900 (speaker system).
CD-ES99 Mini Component System consisting of CD-ES99 (main unit)
MINI COMPONENT SYSTEM
and CP-ES99 (speaker system).
MODEL
CD-ES900
CD-ES99
OPERATION MANUAL
Accessories
Please confirm that th
ページ2に含まれる内容の要旨
CD-ES900 CD-ES99 SPECIAL NOTES NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in- terference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to ra- CAUTION: TO REDUCE THE RISK OF
ページ3に含まれる内容の要旨
CD-ES900_99(U) TINSEA002AWZZ 2 CD-ES900 CD-ES99 IMPORTANT SAFETY INSTRUCTIONS 1 Read Instructions - All the safety and operating instructions should 10 Ventilation - Slots and openings in the cabinet are provided for venti- be read before the product is operated. lation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or cov- 2 Retain Instructions - The safety and operating instructions should be ered. The openings should
ページ4に含まれる内容の要旨
CD-ES900 CD-ES99 IMPORTANT SAFETY INSTRUCTIONS (continued) 15 Outdoor Antenna Grounding - If an outside antenna or cable system 19 Object and Liquid Entry - Never push objects of any kind into this is connected to the product, be sure the antenna or cable system is product through openings as they may touch dangerous voltage points grounded so as to provide some protection against voltage surges and or short-out parts that could result in a fire or electric shock. Never spill built-up static cha
ページ5に含まれる内容の要旨
CD-ES900 Contents CD-ES99 Page ! General Information Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ENERGY STAR® Program Information Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 9 As an ENERGY STAR® Partner, SHARP has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. ! Preparation for Use ENERGY STAR® is a U.S. registered mark. System connections . . . . . . . . . . .
ページ6に含まれる内容の要旨
CD-ES900 Precautions CD-ES99 ! General " Hold the AC power plug by the head when " Please ensure that the equipment is positioned in a well-venti- removing it from the AC outlet, as pulling lated area and ensure that there is at least 4" (10 cm) of free the cord can damage internal wires. space along the sides, top and back of the equipment. 4" (10 cm) 4" (10 cm) " Do not remove the outer cover, as this 4" (10 cm) may result in electric shock. Refer inter- nal service to your local SHARP serv
ページ7に含まれる内容の要旨
CD-ES900 Controls and indicators CD-ES99 1 ! Front panel Reference page 1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 3. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 14 13 4. CD Track Up or Fast Forward, Tape 2 Fast Forward, Tuner Preset Up, Time Up Button . . . . . . . . . . . 15, 17, 22, 24 1 14 5. Clock/Timer Button
ページ8に含まれる内容の要旨
CD-ES900 Controls and indicators (continued) CD-ES99 ! Display 1 2 3 4 5 6 7 Reference page 1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 8 2. CD Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 3. CD Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 5. CD Repeat Play Indicator . . . . . . . . . . . .
ページ9に含まれる内容の要旨
CD-ES900 CD-ES99 1 ! Remote control Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 13 1 2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 16 3. Disc Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 18 4. CD Clear/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . . 14, 20 5. Memory/Set Button . . . . . . . . . . . . . . . . . . . 15, 20, 22, 27, 30 13 6. CD Track Down or Fast Reverse, Tape
ページ10に含まれる内容の要旨
CD-ES900 System connections CD-ES99 Make sure to unplug the AC power cord before any connections. Antenna connection (see page 11) FM antenna AM loop antenna Right speaker Left speaker Speaker connection (see page 11) AC outlet (AC 120 V, 60 Hz) AC power connection (see page 12) 10 03/11/5 CD-ES900_99(U)1.fm TINSEA002AWZZ Preparation for Use
ページ11に含まれる内容の要旨
CD-ES900_99(U) TINSEA002AWZZ 3 CD-ES900 CD-ES99 ! Antenna connection ! Speaker connection Supplied FM antenna: Connect the black wire to the minus (-) terminal, and the red wire to 2 Connect the FM antenna wire to the FM 75 OHMS terminal and the plus (+) terminal. position the FM antenna wire in the direction where the strongest signal can be received. Supplied AM loop antenna: Connect the AM loop antenna to the AM LOOP jack. Position the AM loop antenna for optimum reception. Place the AM loop
ページ12に含まれる内容の要旨
CD-ES900 System connections (continued) CD-ES99 ! AC power connection ! Demonstration mode After checking all the connections have been made correctly, plug The first time the unit is plugged in, the the AC power cord of this unit into the AC outlet. If you plug in the unit will enter the demonstration mode. unit first, the unit will enter the demonstration mode. You will see words scroll. To cancel the demonstration mode: When the unit is in the power stand- by mode (demonstration mode), pre
ページ13に含まれる内容の要旨
CD-ES900 Remote control CD-ES99 Notes concerning use: ! Battery installation " Replace the batteries if the operating distance is reduced or if the Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). operation becomes erratic. 2 " Periodically clean the transmitter on the remote control and the Batteries are not included. sensor on the unit with a soft cloth. " Exposing the sensor on the unit to strong light may interfere with 1 Remove the battery cover. 2 Insert the batteries according t
ページ14に含まれる内容の要旨
CD-ES900 General control CD-ES99 ! Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned counterclockwise, the volume will decrease. ..... 0 30 MAXIMUM Remote control operation: Press the VOLUME (+ or -) button to in- crease or decrease the volume. ! Bass control When the power is first turned on, the unit will enter the extra bass mode which em- phasizes the bass frequencies, and "X- BASS" will appear. To cancel the extra
ページ15に含まれる内容の要旨
CD-ES900 Setting the clock CD-ES99 5 Press the or button to adjust the hour and then press the MEMORY/SET button. 3 Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. 6 Press the or button to adjust the minutes and then press the MEMORY/SET button. In this example, the clock is set for the 12-hour (AM 12:00) display. Press the or button once to advance the time by 1 minute. Hold it down to change the time in 5-minute intervals. 1 Press t
ページ16に含まれる内容の要旨
CD-ES900 Listening to a CD (CDs) CD-ES99 This system can also play audio CD-R and CD-RW discs, but can- ! CD playback not record. Some audio CD-R and CD-RW discs may not be playable due to the 1 Press the ON/STAND-BY button to turn the power on. state of the disc or the device that was used for recording. 2 Press the CD button. 3 Press the 1 button and within 5 seconds, press the OPEN/CLOSE button to open the disc tray 1. 4 Place the CD on the disc tray 1, label side up. Be sure to place 3" (
ページ17に含まれる内容の要旨
CD-ES900 CD-ES99 " Playback will begin from track 1 on the DISC 1. After that disc fin- ! Various CD functions ishes playing, the next disc will automatically play. Function Main unit Remote Operation " After the last track on the fifth disc is played, the CD player stops control automatically. Play Press in the stop " When there is no CD in one of the disc trays (1 - 5), the empty mode. tray will be skipped to the next tray with a CD. 4 To exchange other CDs while playing a disc: Press one of
ページ18に含まれる内容の要旨
CD-ES900 Advanced CD playback CD-ES99 ! To specify a disc to play ! Direct track search You can play a disc by specifying the disc number. By using the direct search buttons, the desired tracks on the current disc can be played. 1 Press one of the 1 - 5 buttons to select the desired disc. Use the direct search buttons on the remote control to select the de- sired track while playing the se- lected disc. Selected track number Selected disc number " The direct search buttons allow you to select
ページ19に含まれる内容の要旨
CD-ES900 CD-ES99 ! Repeat play ! Random play Repeat play can play all 5 discs, all tracks on a chosen disc, or a The tracks on the disc(s) can be played in random order automatically. programmed sequence continuously. To random play all tracks on up to 5 discs: To repeat all tracks on up to 5 discs: Press the RANDOM button on the remote control. Press the / button twice. 4 To repeat desired tracks: Perform steps 1 - 6 in the "Programmed play" section on page 20 and then press the / button t
ページ20に含まれる内容の要旨
CD-ES900 Advanced CD Playback (continued) CD-ES99 ! Programmed play You can choose up to 32 selections for playback in the order you like. To clear the programmed selections: Press the CLEAR/DIMMER button on the re- 1 While in the stop mode, press the mote control while the "MEMORY" indicator is MEMORY/SET (MEMORY) button flashing. to enter the programming save Each time the button is pressed, one track will mode. be cleared, beginning with the last track pro- grammed. To cancel the programmed
