ページ1に含まれる内容の要旨
G
RX-V657
AV Receiver
Ampli-tuner audio-vidéo
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
GEBRUIKSAANWIJZING
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
ページ2に含まれる内容の要旨
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this 14 Do not attempt to modify or fix this unit. Contact manual carefully. Keep it in a safe place for future qualified YAMAHA service personnel when any reference. service is needed. The cabinet should never be 2 Install this sound system in a well ventilated, cool, opened for any reasons. dry, clean place – away from direct sunlight, heat 15 When no
ページ3に含まれる内容の要旨
BASIC SOUND FIELD ADVANCED ADDITIONAL English INTRODUCTION PREPARATION OPERATION PROGRAMS OPERATION INFORMATION CONTENTS INTRODUCTION SOUND FIELD PROGRAMS FEATURES............................................................. 2 SOUND FIELD PROGRAM GETTING STARTED............................................ 3 DESCRIPTIONS...............................................48 Supplied accessories .................................................. 3 For movie/video sources..............................
ページ4に含まれる内容の要旨
FEATURES FEATURES Built-in 7-channel power amplifier Other features ◆ Minimum RMS output power ◆ YPAO: YAMAHA Parametric Room Acoustic (0.06% THD, 20 Hz to 20 kHz, 8 !) Optimizer for automatic speaker setup Front: 95 W + 95 W ◆ 192-kHz/24-bit D/A converter Center: 95 W ◆ A SET MENU that provides you with items for Surround: 95 W + 95 W optimizing this unit for your audio/video system Surround back: 95 W + 95 W ◆ 8 additional input jacks for discrete multi-channel input ◆ PURE DIRECT for pure f
ページ5に含まれる内容の要旨
English INTRODUCTION GETTING STARTED GETTING STARTED Supplied accessories Please check that you received all of the following parts. Remote control Batteries (4) 75-ohm/300-ohm antenna AM loop antenna (AAA, R03, UM-4) adapter (U.K. model only) CODE SET TRANSMIT SYSTEM POWER POWER STANDBY POWER TV AV CD MD/CD-R TUNER SLEEP DVD DTV/CBL V-AUX MULTI CH IN VCR 1 DVR/VCR2 AMP TV VOL TV CH VOLUME TV MUTE TV INPUT MUTE STEREO MUSIC ENTERTAIN MOVIE 1 2 3 4 STANDARD SELECT EXTD SUR. PURE DIRECT 5 6 7 8 O
ページ6に含まれる内容の要旨
CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front panel 1426 35 78 90 ZONE ON/OFF VOLUME MAIN ZONE 2 OPTIMIZER MIC PRESET/TUNING FM/AM A/B/C/D/E l PRESET/TUNING h MEMORY TUNING MODE SEARCH MODE EDIT XM CATEGOR NEXT Y LEVEL MAN'L/AUTO FM AUTO/MAN'L MONO DISPLAY PROGRAM INPUT PHONES SPEAKERS A B STRAIGHT TONE CONTROL INPUT MODE MULTI CH PURE DIRECT INPUT STANDBY VIDEO AUX /ON S VIDEO VIDEO L AUDIO R OPTICAL EFFECT SILENT CINEMA AC BD EF G H I J KL 1 STANDBY/ON 6 PRESET/TUNING l / h, LEVE
ページ7に含まれる内容の要旨
English INTRODUCTION CONTROLS AND FUNCTIONS 0 VOLUME L ZONE ON/OFF buttons Controls the output level of all audio channels. MAIN This does not affect the REC OUT level. Switches this unit’s operation to control the component in the main room (see page 72). A PHONES (SILENT CINEMA) jack Outputs audio signals for private listening with ZONE 2 headphones. When you connect headphones, no signals Switches this unit’s operation to control the component in are output to the PRE OUT jacks or to the
ページ8に含まれる内容の要旨
CONTROLS AND FUNCTIONS Remote control This section describes the function of each control on the 1 Infrared window remote control used to control this unit. To operate other Outputs infrared control signals. Aim this window at the components, see “REMOTE CONTROL FEATURES” on component you want to operate. page 67. 2 CODE SET Use to set up remote control codes (see page 68). 1 9 CODE SET TRANSMIT 3 Input selector buttons 2 0 SYSTEM Select the input source and change the control area. POWER POWER
ページ9に含まれる内容の要旨
English INTRODUCTION CONTROLS AND FUNCTIONS B SLEEP Sets the sleep timer. Using the remote control C MULTI CH IN The remote control transmits a directional infrared beam. Selects multi-channel input when using an external Be sure to aim the remote control directly at the remote decoder (etc.). control sensor on the main unit during operation. D AMP Selects the AMP mode. You must select the AMP mode to VOLUME control the main unit. OPTIMIZER MIC PRESET/TUNING FM/AM A/B/C/D/E l PRESET/TUNING h
ページ10に含まれる内容の要旨
CONTROLS AND FUNCTIONS Front panel display 123456 789 0A B C 96 DVR/VCR2 VCR1 V-AUX DTV/CBL DVD MD/CD-R TUNER CD PHONO t 24 VIRTUAL SILENT CINEMA YPAO AUTO TUNED STEREO MEMORY MUTE VOLUME MATRIX DISCRETE SP q DIGITAL STANDARD ZONE2 NIGHT A B HiFi DSP PTY HOLD PS PTY RT CT EON SLEEP dB q EX q PL ft 96/24 q PL q PL x LC R mS LFE SL SB SR PCM dB D E OFH G IJ P KN LM 1 Decoder indicators 0 STEREO indicator When any of this unit’s decoders function, the respective Lights up when this unit is re
ページ11に含まれる内容の要旨
English INTRODUCTION CONTROLS AND FUNCTIONS K SLEEP indicator Lights up while the sleep timer is on. L 96/24 indicator Lights up when a DTS 96/24 signal is input to this unit. M LFE indicator Lights up when the input signal contains the LFE signal. N Input channel indicators Indicate the channel components of the current digital input signal. O ZONE 2 indicator Lights up when Zone 2 power is on. P Radio Data System indicators The name(s) of the Radio Data System data offered by the currently r
ページ12に含まれる内容の要旨
CONTROLS AND FUNCTIONS Rear panel 12 3 47 5 6 8 COMPONENT VIDEO TUNER PR PB Y DVD 75Ω UNBAL. FM AM ANT GND ANT DTV/ CBL AUDIO AUDIO VIDEO VIDEO S VIDEO XM DIGITAL MONITOR OUTPUT OUT MD/CD-R CD DVD PRE OUT REMOTE AC OUTLETS CENTER SINGLE SWITCHED OPTICAL (PLA INY) DTV/ CBL IN CONTR OUTOL CD-R MD/ MD/CD-R (REC) OUT IN OUT VCR 1 SUB SURROUND PRESENCE/ +12V FRONT SURROUND WOOFER BACK ZONE 2 15mA MAX. DVD FRONT OUT SPEAKERS A DTV/CBL SURROUND IN DVR/ VCR 2 SURROUND SURROUND CD BACK OUT B DVD FRONT CE
ページ13に含まれる内容の要旨
English PREPARATION SPEAKER SETUP SPEAKER SETUP Surround speakers (SR and SL) Speaker placement The surround speakers are used for effect and surround sounds. Place these speakers behind your listening The speaker layout below shows the standard ITU-R* position, facing slightly inwards, about 1.8 m above the speaker setting. You can use it to enjoy CINEMA DSP and floor. multi-channel audio sources. Surround back speakers (SBR and SBL) * ITU-R is the radio communication sector of the ITU Th
ページ14に含まれる内容の要旨
SPEAKER SETUP Speaker connections 5 Tighten the knob to secure the wire. Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are 3 faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound 4 will be unnatural and lack bass. CAUTION 5 If you will use 4 or 6 ohm speakers, be sure to set this unit’s speaker impedance setting to Red: positive (+) 4 ohms before using (s
ページ15に含まれる内容の要旨
English PREPARATION SPEAKER SETUP Subwoofer Presence speakers Surround speakers system Right Left Right Left 1 23 4 5 PRE OUT CENTER SINGLE SUB SURROUND PRESENCE/ FRONT SURROUND WOOFER BACK ZONE 2 SPEAKERS A SURROUND B FRONT CENTER SURROUND BACK 6 7 8 9 10 Front speakers Center (B) speaker Right Left Surround back speakers Right Left Front speakers (A) You can connect both surround back and presence speakers to this unit, but they do not output sound simultaneously. The surround back sp
ページ16に含まれる内容の要旨
SPEAKER SETUP ■ FRONT terminals Connect one or two speaker systems (6, 7) to these terminals. If you use only one speaker system, connect it to the FRONT A or B terminals. ■ CENTER terminals Connect a center speaker (8) to these terminals. 2 ■ SURROUND terminals 3 Connect surround speakers (4, 5) to these terminals. 6 8 ■ SUBWOOFER jack 7 Connect a subwoofer with built-in amplifier (1), such as 1 4 the YAMAHA Active Servo Processing Subwoofer System, to this jack. 9 10 ■ SURROUND BACK ter
ページ17に含まれる内容の要旨
English PREPARATION CONNECTIONS CONNECTIONS Dust protection cap Before connecting components Pull out the cap from the optical jack before you connect the fiber optic cable. Do not discard the cap. When you are not using the optical jack, be sure to put the cap back in CAUTION place. This cap protects the jack from dust. Do not connect this unit or other components to the mains power until all connections between components are complete. ■ Cable indications For analog signals ■ Video jacks
ページ18に含まれる内容の要旨
CONNECTIONS Connecting video components ■ Connections for DVD playback Note Be sure to connect your video source components in the same way you connect your video monitor to this unit if VIDEO CONV. (see page 63) is set to OFF. For example, if you connect your video monitor to this unit using a VIDEO connection, connect your video source components to this unit using the VIDEO connections. (Even when VIDEO CONV. is set to OFF, S-video signals input from your video source component are automat
ページ19に含まれる内容の要旨
English PREPARATION CONNECTIONS ■ Connecting to the MULTI CH INPUT jacks This unit is equipped with 8 additional input jacks (left and right FRONT, CENTER, left and right SURROUND, left and right SURROUND BACK and SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder, sound processor or pre-amplifier. Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to match the left and right outputs to the left a
ページ20に含まれる内容の要旨
CONNECTIONS ■ Connections for other video components Notes Be sure to connect your video source components in the same way you connect your video monitor to this unit if VIDEO CONV. (see page 63) is set to OFF. For example, if you connect your video monitor to this unit using a VIDEO connection, connect your video source components to this unit using the VIDEO connections. (Even when VIDEO CONV. is set to OFF, S-video signals input from your video source component are automatically converte
