ページ1に含まれる内容の要旨
XL-MP60(U) TINSEA043SJZZ
1
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
MICRO COMPONENT SYSTEM XL-MP60 Micro Component System consisting of XL-MP60 (main unit),
CP-MP60F (front speakers) and CP-MP60SW (subwoofer).
MODEL
XL-MP60
OPERATION MANUAL
04/12/24 XL-MP60(U)_FRONT.fm
TINSEA043SJZZ
ページ2に含まれる内容の要旨
XL-MP60 SPECIAL NOTES Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency en- ergy and, if not installed and used in accordance with the instructions, CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, may cause harmful inte
ページ3に含まれる内容の要旨
XL-MP60 IMPORTANT SAFETY INSTRUCTIONS 1 1 Read Instructions - All the safety and operating instructions should 10 Ventilation - Slots and openings in the cabinet are provided for venti- be read before the product is operated. lation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or cov- 2 2 Retain Instructions - The safety and operating instructions should be ered. The openings should never be blocked by placing the prod
ページ4に含まれる内容の要旨
XL-MP60 IMPORTANT SAFETY INSTRUCTIONS (continued) 15 Outdoor Antenna Grounding - If an outside antenna or cable system 19 Object and Liquid Entry - Never push objects of any kind into this is connected to the product, be sure the antenna or cable system is product through openings as they may touch dangerous voltage points grounded so as to provide some protection against voltage surges and or short-out parts that could result in a fire or electric shock. Never spill built-up static charges. Art
ページ5に含まれる内容の要旨
Contents XL-MP60 1 Page NOTES ! General Information Licensed under one or more of U.S. Pat. 4,972,484, 5,214,678, Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5,323,396, 5,530,655, 5,539,829, 5,544,247, 5,606,618, 5,610,985, Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 9 5,740,317, 5,777,992, 5,878,080 or 5,960,037. 2 Supply of this product does not convey a license nor imply any ! Preparation for
ページ6に含まれる内容の要旨
Precautions XL-MP60 ! General " Hold the AC power plug by the head when " Please ensure that the equipment is positioned in a well-venti- removing it from the AC outlet, as pulling lated area and ensure that there is at least 4" (10 cm) of free the cord can damage internal wires. space along the sides, top and back of the equipment. 4" (10 cm) 4" (10 cm) " Do not remove the outer cover, as this 4" (10 cm) may result in electric shock. Refer inter- nal service to your local SHARP service faci
ページ7に含まれる内容の要旨
Controls and indicators XL-MP60 1 ! Front panel Reference page 1. Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 2. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 2 3. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 14 1 11 5. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ8に含まれる内容の要旨
Controls and indicators (continued) XL-MP60 ! Rear panel Reference page 1. AC Power Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3. FM/AM Loop Antenna Jack . . . . . . . . . . . . . . . . . . . . . . . . . 11 4. Video/Auxiliary (Audio Signal) Input Jacks . . . . . . . . . . . . 28 5. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 1
ページ9に含まれる内容の要旨
XL-MP60(U) TINSEA043SJZZ 2 XL-MP60 1 ! Remote control 1 Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 13 2 2. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 14 12 3. Direct Track Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . 20 4. Disc Track Down or Fast Reverse, 2 Tuner Preset Down, Time Down Button . . . . . . . . . 15, 18, 24 5. Disc Stop Button . . . . . .
ページ10に含まれる内容の要旨
System connections XL-MP60 Make sure to unplug the AC power cord before any connections. FM/AM loop antenna connection (see page 11) FM antenna AM loop antenna Subwoofer Front speaker (right) Front speaker (left) AC outlet (AC 120 V, 60 Hz) Speaker connection (see page 11) Connecting the AC power cord (see page 12) 10 05/1/28 XL-MP60(U).fm TINSEA043SJZZ Preparation for Use
ページ11に含まれる内容の要旨
XL-MP60 1 ! Speaker connection ! FM/AM loop antenna connection Connect the black wire to the minus (-) terminal, and the red wire to Connect the FM/AM loop antenna to the ANTENNA jack. the plus (+) terminal. Position the FM antenna wire and rotate the AM loop antenna for 2 optimum reception. Place the AM loop antenna on a shelf, or attach Front speaker Front speaker it to a stand or a wall. Subwoofer (right) (left) 3 4 Red Black Caution: " Use speakers with an impedance of 6 ohms or more, as
ページ12に含まれる内容の要旨
System connections (continued) XL-MP60 ! Connecting the AC power cord ! Demonstration mode After checking all the connections have been made correctly, con- When you plug the unit in for the first time, nect the AC power cord to the AC power input jack, then plug the AC the unit will enter the demonstration power cord of this unit into the AC outlet. If you plug in the unit first, mode. You will see words scroll. the unit will enter the demonstration mode. To cancel the demonstration mode: Whe
ページ13に含まれる内容の要旨
Remote control XL-MP60 1 Notes concerning use: ! Battery installation " Replace the batteries if the operating distance is reduced or if the Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). operation becomes erratic. " Periodically clean the transmitter on the remote control and the Batteries are not included. 2 sensor on the unit with a soft cloth. " Exposing the sensor on the unit to strong light may interfere with 1 Remove the battery cover. 2 Insert the batteries according to the d
ページ14に含まれる内容の要旨
General control XL-MP60 ! Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned counterclockwise, the volume will decrease. Remote control operation: Press the VOLUME (+ or -) button to increase or decrease the vol- ume. ..... 0 30 MAXIMUM ! Bass control (X-BASS) When the power is first turned on, the unit will enter the extra bass mode which emphasizes the bass frequencies, and "X-BASS" will appear. To cancel the extra b
ページ15に含まれる内容の要旨
Setting the clock XL-MP60 1 3 Within 30 seconds, press the PRESET ( or ) button to adjust the hour and then press the MEMORY/SET button. 2 Press the PRESET ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. 3 4 Within 30 seconds, press the PRESET ( or ) button to adjust the minutes and then press the MEMORY/SET but- ton. 4 Press the PRESET ( or ) button once to advance the time 5 by 1 minute. Hold it down to advance continuously. In this example, the clo
ページ16に含まれる内容の要旨
Listening to a disc XL-MP60 This system can play back a standard CD, CD-R/RW in the CD for- mat and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the equipment used for recording. CD: The CD indicator will light up when a normal CD is loaded. MP3: MP3 is a form of compression. It is an acronym which stands for MPEG Audio Layer 3. MP3 is a type of audio code which is processed by signific
ページ17に含まれる内容の要旨
XL-MP60 1 1 Press the ON/STAND-BY button to turn the power on. 6 Press the OPEN/CLOSE button to close the disc compartment. 2 Press the CD button. CD indicator [CD] 2 3 Press the OPEN/CLOSE button to open the disc compartment. All trays open in tiers. 3 1 2 MP3 track indicator [MP3] 4 Place the disc on the disc tray 1, label side up. Be sure to place 3" (8 cm) discs in the middle of the disc trays. 4 5" (12 cm) 3" (8 cm) 1 WMA track indicator [WMA] 5 5 To place discs in the trays 2 - 5 1 6 1 T
ページ18に含まれる内容の要旨
Listening to a disc (continued) XL-MP60 To remove the discs: ! Various disc functions 1. In the stop mode, press the Function Main unit Remote Operation OPEN/CLOSE button. control " All trays open in tiers. 2. Remove the disc in the tray 1. Play Press in the stop mode. 3. Slide in the tray 1 toward the unit. In the same way, remove discs in Stop Press in the playback the trays 2 - 5. mode. 4. After removing the discs, press the OPEN/CLOSE button again. Pause Press in the playback mode. Pre
ページ19に含まれる内容の要旨
Advanced disc playback XL-MP60 1 ! To change the display (CD-R/RW discs recorded in the MP3 or WMA format only) While in the stop mode or playback mode, press the DISPLAY but- ton. 2 Each time the button is pressed, the display will change as follows. [When in the stop mode] 3 Folder name Total number of tracks 4 Track name ! To select the desired folder or track by name 5 (CD-R/RW discs recorded in the MP3 or WMA [When in the playback mode] format only) 1 While in the stop mode, press th
ページ20に含まれる内容の要旨
Advanced disc playback (continued) XL-MP60 ! To play from a specified disc ! Direct track search You can start playback from the desired disc by selecting the num- By using the direct search buttons, the desired tracks on the current ber. disc can be played. Use the direct search buttons on 1 Press one of the 1 - 5 buttons to select the desired disc. the remote control to select the de- sired track while playing the se- lected disc. Selected track number " The direct search buttons allow you
