ページ1に含まれる内容の要旨
PLCD22MRP
OWNER'S MANUAL
Shipboard Audio System
• PLL Synthesizer Stereo Radio
• Digital Compact Disc Player
• Automatically Memory Storing
• Direct Track Access
• Program CD Tracks
• Electronic Shockproof (ESP) Function
www.pyleaudio.com
ページ2に含まれる内容の要旨
CONTENTS Installation.....................................3 Program CD tracks.....................13 Take out screw before installation ..3 Track/time display ......................14 Installing the unit ..........................3 MP3 operation..............................14 Wiring Connection........................4 Select songs...............................14 Operation.......................................5 Pause .........................................15 Location of keys ................
ページ3に含まれる内容の要旨
INSTALLATION TAKE OUT SCREW BEFORE INSTALL 3. Use the glue paper to stick the two Before install the unit, please remove the mounting bracket to the back of the two screws. dashboard. The screw holes of the brackets must respectively aim at the Take out screw before install. mounting holes in order to fix the unit to the dashboard. Mounting Bracket Dashboard NOTE: This unit is installed on the ship, so you should use two pieces of plastic film (30mmX20mm) supplied with the unit to seal the two h
ページ4に含まれる内容の要旨
WIRING CONNECTION (BLACK) WIRING REMOTE CONNECTOR SOCKET (YELLOW) RED Rch (YELLOW) WHITE Lch ANTENNA AUX IN CABLE FUSE CONNECTOR RED RCA CABLE (GREY) Rch WHITE Lch BLUE POWER ANTENNA RED IGNITION SWITCH (ACC+) YELLOW MEMORY BACK-UP (B+) BLACK GROUND (B-) WHITE GREY FRONT Lch FRONT Rch SPEAKER SPEAKER WHITE/BLACK GREY/BLACK GREEN VIOLET REAR Rch REAR Lch SPEAKER SPEAKER GREEN/BLACK VIOLET/BLACK 4
ページ5に含まれる内容の要旨
OPERATION 6 9 15 11 7 8 18 3 19 2 4 13 16 10 12 17 20 21 14 22 23 24 25 1 When pull open the disc cover: 26 5 5
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
OPERATION 4 MODE SELECTION button Press the MODE button (4) to step sequentially through the following sources: e.g. radio mode to CD mode (or cassette mode) to AUX in mode. 5 BAND SELECTION button FOR WEATHER BAND VERSION ONLY: Press the BAND button (5) to step sequentially through the following bands: FM1, FM2, AM, WX. 6 TRACK/SEARCH/TUNE buttons • STATION SELECTION (FOR RADIO OPERATION) Press / buttons (6) shortly to activate automatic seek function. Press for more than 3 seconds until “MAN”
ページ8に含まれる内容の要旨
OPERATION INSTALLATION HARDWARE REMOTE MOUNTING BRACKET HOLDER BASE X1 X1 X1 SCREW (ø4X50) NUT X2 X2 INSTALLATION DIAGRAM 1. First insert the hooks on the base into the slots of the holder to install the base to the holder. 2. Select the proper object, then place the remote mounting bracket on the base and let the object go through the base and the mounting bracket. 8
ページ9に含まれる内容の要旨
OPERATION 3. Align the screw holes on the holder with the screw holes on the base and the screw holes on the bracket, then use the two screws (ø4X50) and nuts to fix the bracket, the base and holder to the proper location. 4. Last install the remote control to the holder. See below, align the four hooks on the holder with the four slots on the remote control. WIRE 9
ページ10に含まれる内容の要旨
OPERATION • SWITCHING ON/OFF THE UNIT Adjust bass level by VOLUME button (11) or VOLUME button (12). Switch on the unit by pressing any button (except EJECT (4)). When Treble system is on, press POWER button (9) Press SEL/MENU button (10) three times. to turn off the unit. When system power Adjust treble level by VOLUME button turns on, the system is returned to (11) or VOLUME button (12). previous mode. Balance Press SEL/MENU button (10) four times. • DISPLAY THE DISC SLOT Adjust sound bal
ページ11に含まれる内容の要旨
OPERATION button (11) or VOLUME button (12) to VOLUME button (12) to set 24 hours select USA or European radio frequency mode or 12 hours mode. - When the currently displayed function spacing. has not been adjusted for several - USA radio spacing is 200k for FM and seconds, it will exit menu set mode. 10k for AM. This is the default frequency - When you have set CLOCK ON during spacing. power off state, LCD backlight will be - European radio spacing is 50k for FM turn on together. and 9k for
ページ12に含まれる内容の要旨
OPERATION of the LCD display backlight. select CH1~CH7 directly. RESET FUNCTION • AUTOMATICALLY MEMORY When you pull out the plastic panel covering STORING & PRESET SCAN the CD opening, you will see the reset -Automatic memory storing button (26) is placed above the disc slot Press AS/PS button (2) for several (5). It must be activated with either a seconds, the radio searches from the ballpoint pen or thin metal object. The current frequency and checks the reset button is to be activated for
ページ13に含まれる内容の要旨
OPERATION • REPEAT THE SAME TRACK CD OPERATION Hold press RPT button (22) for several • SWITCHING TO CD MODE seconds to continuously repeat the If there is no CD inserted in the driver: same track. Press it for several seconds Gently insert the CD with the printed again to stop repeat. side uppermost into the CD • PLAYING ALL TRACKS IN RANDOM compartment until you feel some Hold press SHF button (23) for several resistance. The CD will be drawn into seconds to play all tracks on CD in the driver
ページ14に含まれる内容の要旨
OPERATION for several seconds will exit PGM and then press BAND/ENTER mode. button (18) shortly. - When the disc is playing in You can also press number programmed order, pressing MEM buttons 0~9 (14) can activate button (20) for several seconds will DIRECT TRACK ACCESS to select cancel the all programmed content your desired track. and “CLR” appears on the display. Note: - If you don’t press MEM button (20) The unit searches the track after few to carry out program setting, then seconds, even i
ページ15に含まれる内容の要旨
OPERATION is directory). The current directory Normal In MP3 searching name is displayed for a second and the currently playing file name SCAN MP3 Searching is displayed. The user can select Mode Select the directory or file in the directory BAND ENTER by VOLUME / buttons (11&12). M1 A, B, C, 1 The selected file can be played by M2 D, E, F, 2 pressing BAND/ENTER button M3 G, H, I, 3 (18). M4 J, K, L, 4 • PAUSE M5 M, N, O, 5 Press /MUTE button (3) to pause MP3 player. Press it again to resume M6
ページ16に含まれる内容の要旨
OPERATION Note: A. Notes on discs: 1. Attempting to use non-standard shape discs (e.g. square, start, heart) may damage the unit. Be sure to use round shape CD discs only for this unit. 2. Do not stick paper or tape, etc, onto the label side or the recording side of any discs, as it may cause a malfunction. 3. Dirt, dust, scratches and warping discs will cause misoperation. B. Notes on CD-Rs (recordable CDs)/ CD-RWs (rewritable CDs): 1. Be sure to use discs with following marks only for the unit
ページ17に含まれる内容の要旨
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions : 178 (W) x 178 (D) x 50 (H) mm Tone Controls - Bass (at 100 Hz) : ± 10 dB - Treble (at 10 KHz) : ± 10 dB Maximum Output Power : 4 x 50 Watts Current Drain : 15 Ampere (max.) CD PLAYER Signal to Noise Ratio : More than 60 dB Channel Separation : More than 50 dB Frequency Response : 40 Hz - 18 KHz RADIO FM Frequency Coverage : 87.5 to 107.9 MHz IF : 10.7 MHz Sensitivity (S/N = 30 dB) : 3 μV Stereo Se
ページ18に含まれる内容の要旨
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution No power. The ignition switch is not If the power supply is on. connected to the accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Disc cannot be Presence of CD disc inside Remove the disc in the player, loaded or ejected. t
