Philips FWD792/98の取扱説明書

ページ1に含まれる内容の要旨

Use this simple and quick way to
watch your favourite DVD movie
FWD792/98 and enjoy your Home Cinema
experience!
Helpful Hints
You only need to make one video connection to your TV in
order to view the DVD playback.
If your TV has S-Video or Component
(Pr Pb Y) video jacks, use one of these
video connections instead for higher
picture quality.
If your TV has only a single Antenna In jack,
you will need an accessory RF modulator. The RF
modulator converts the video from the DVD system
so it can

ページ2に含まれる内容の要旨

Make sure your DVD system and TV are connected and turned on! Plug & Play 1 Turn on the system. “AUTO INSTALL - PRESS PLAY” will be displayed. 2 Press PLAY 2; on the system to start installation. Playing a disc 3 Press DISC on the remote control. 4 Turn on the TV and select the correct Video In mode. You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system). 0 5 Press OPEN CLOSE 0 on the front of the DVD system and load a disc, then press 0 the corresponding