ページ1に含まれる内容の要旨
DS
DSCOMPONENTSYSTEM
DS600.2, DS650.2, DS680.2
©2006 Stillwater Designs
ページ2に含まれる内容の要旨
INSTALLATION DSComponentSystem Owner’sManual Door Body Reinforcing Panel Figure 2 (Optional) Models: DS600.2 / DS650.2 / DS680.2 Door Panel Authorized Kicker Dealer: _________________________ Speaker cut-out Congratulations on your KICKER purchase Purchase Date: _________________________ Please record your purchase Speaker Grille information and keep your sales receipt for validation of warranty. Speaker Model Number: _________________________ Speaker cut-out Screws Midrange/Woofer Your DS compo
ページ3に含まれる内容の要旨
PERFORMANCE TweeterMounting Figure 5 Optional Tweeter Flange The tweeter can be mounted one of three ways: flush, angled-surface and angled mounting. For flush mounting applications, please refer to the illustration in Figure 5. Choose a flat location on the panel with space behind the panel to allow room for the mounting nut. After checking the clearances, cut a 1 9/16” (4cm) diameter mounting hole in the panel. Place the shorter mounting nut behind the panel (only use the longer mounting nut
ページ4に含まれる内容の要旨
GARANTIE AcousticsLimitedWarranty InternationalWarranty Kicker warrants this product to be free from defects in material and workmanship under normal use for a period of Contact your International Kicker dealer or distributor concerning specific procedures for your country's warranty THREE (3) MONTHS from date of original purchase with receipt. When purchased from an Authorized KICKER Dealer policies. it is warranted for ONE (1) YEAR from date of original purchase with receipt. In all cases you
