ページ1に含まれる内容の要旨
COVER_UX-G200[J].FM Page 1 Wednesday, November 5, 2008 3:08 PM
MICRO COMPONENT SYSTEM
UX-G200—Consists of CA-UXG200 and SP-UXG200
For Customer Use:
Enter below the Model No. and Serial No.
which are located either on the rear,
bottom or side of the cabinet. Retain
this information for future reference.
INSTRUCTIONS
Model No.
Serial No.
LVT1956-005A
[J]
English
ページ2に含まれる内容の要旨
SAFETY_UX-G200[J].FM Page 1 Wednesday, November 5, 2008 3:07 PM Warnings, Cautions and Others Mises en garde, précautions et indications diverses For U.S.A. This equipment has been tested and found to comply with CAUTION the limits for a Class B digital device, pursuant to part 15 of RISK OF ELECTRIC SHOCK DO NOT OPEN the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. CAUTION: TO REDUCE THE RISK O
ページ3に含まれる内容の要旨
SAFETY_UX-G200[J].FM Page 2 Wednesday, November 5, 2008 3:07 PM IMPORTANT FOR LASER PRODUCTS CAUTION 1. CLASS 1 LASER PRODUCT Battery shall not be exposed to excessive heat such as 2. CAUTION: Do not open the top cover or cabinet. There are sunshine, fire or the like. no user serviceable parts inside the unit; leave all servicing ATTENTION to qualified service personnel. Les piles ne doivent en aucun cas être exposées à une 3. CAUTION: Visible and/or invisible class 1M laser radiation ch
ページ4に含まれる内容の要旨
UX-G200[J].BOOK Page 1 Tuesday, December 2, 2008 3:05 PM Introduction Thank you for purchasing a JVC product. Others Please read all instructions carefully before operation, to • Should any metallic object or liquid fall into the System, ensure your complete understanding and to obtain the best unplug the AC power cord and consult your dealer before possible performance from the unit. operating any further. DO NOT disassemble the System since there Precautions are no user serviceable par
ページ5に含まれる内容の要旨
UX-G200[J].BOOK Page 2 Tuesday, December 2, 2008 3:05 PM Contents Getting Started ...................................................3 Step 1: Unpack ...................................................................3 Step 2: Prepare the Remote Control ..................................3 Step 3: Hook Up ................................................................4 Before Operating the System ............................6 Daily Operations—Playback ............................7 Listening t
ページ6に含まれる内容の要旨
FM COAXL 75 AM LOOP AM EXT ANTENNA UX-G200[J].BOOK Page 3 Tuesday, December 2, 2008 3:05 PM Getting Started Step 1: Unpack Step 1:Unpack the package and check the accessories. After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied. • FM antenna (1) • AM loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately. Step 2: Prepare the Remote Control Inse
ページ7に含まれる内容の要旨
UX-G200[J].BOOK Page 4 Tuesday, December 2, 2008 3:05 PM Step 3: Hook Up If you need more detailed information, see page 5. Turn the power off to all components before connections. FM antenna (supplied) Extend it so that you can AM loop antenna (supplied) obtain the best reception. Turn it until the best reception is obtained. Right speaker Main unit Left speaker Red Black To a wall outlet Plug the AC power cord only after all connections are complete. 4
ページ8に含まれる内容の要旨
FM COAXL 75 AM LOOP AM EXT ANTENNA UX-G200[J].BOOK Page 5 Tuesday, December 2, 2008 3:05 PM To connect the AM loop antenna To connect the speaker cords Make sure to connect the wire correctly. Make sure the both speakers are connected correctly and firmly. 1. Hold 3. Lock 2. Insert 1. Unlock 2. Insert 3. Release For better FM/AM reception When connecting the speaker cords, match the polarity of the speaker terminals: The black cord to (–), the red cord to Disconnect the supplied FM antenn
ページ9に含まれる内容の要旨
UX-G200[J].BOOK Page 6 Tuesday, December 2, 2008 3:05 PM Before Operating the System The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 TRACK indicator • Lights when a disc or USB mass storage class device is 1 2 34 5 6 7 8 9 10 played. 2 REPEAT mode indicators REPEAT1GROUP RANDOM PROG. (REPEAT1/REPEAT/REPEAT GROUP) TAPE TRACK WMA MP3 CD USB • Ligh
ページ10に含まれる内容の要旨
UX-G200[J].BOOK Page 7 Tuesday, December 2, 2008 3:05 PM Daily Operations—Playback 1 Turn on the power. The STANDBY lamp on the main unit turns off. 2 Select the source. Playback automatically starts if the selected source is ready to start. Number buttons • If you select AUDIO IN, start playback source on the external component. DISPLAY/ PROGRAM 3 Adjust the volume. PRESET 1,y, 4 Operate the target source as explained 4,x later. TUNING/ STOP 7 GROUP To turn off (standby) the System K,5 Th
ページ11に含まれる内容の要旨
UX-G200[J].BOOK Page 8 Tuesday, December 2, 2008 3:05 PM To preset the stations Listening to the Radio You can preset 20 FM and 10 AM stations. To select the band (FM or AM) 1 Tune in to a station you want to preset. From the remote control: FM/AM/ 2 Activate the preset number entry mode. AUDIO IN FM FM MONO DISPLAY/ PROGRAM A_IN AM kHz (AUDIO IN) MHz On the main unit: • Finish the following process while the indication on the display is flashing. FM FM MONO 3 Select a preset number for the
ページ12に含まれる内容の要旨
UX-G200[J].BOOK Page 9 Tuesday, December 2, 2008 3:05 PM Playable Media and Files Playing Back a USB Mass Storage Class Device This System can play back following types of discs/files. You can connect a USB mass storage class device such as a • Audio CD USB flash memory device, Digital Audio Player (DAP) to • MP3/WMA files on a CD-R, CD-RW, or USB mass this System. storage class device IMPORTANT Audio CD CD-R CD-RW • You cannot connect a computer to the USB MEMORY terminal of the System.
ページ13に含まれる内容の要旨
UX-G200[J].BOOK Page 10 Tuesday, December 2, 2008 3:05 PM To display ID3/WMA tag information Playing Back Discs/Files While playing MP3/WMA... DISPLAY/ To select a track/group PROGRAM ID3 ON To select a track: ID3 OFF PRESET Selects the next tracks. ID3/WMA tag information is shown on the display. Playing Back Other Equipment Selects the previous tracks. To connect other equipment To select a group (MP3/WMA only): By using a stereo mini plug cord (not supplied), you can TUNING/GROUP connect
ページ14に含まれる内容の要旨
UX-G200[J].BOOK Page 11 Tuesday, December 2, 2008 3:05 PM Daily Operations—Sound & Other Adjustments Adjusting the Volume Remote control You can adjust the volume level from level 0 (“VOL MIN”) to level 31 (“VOL MAX”). Remote control: Main unit: CLOCK/ SLEEP VOLUME Remote ONLY To drop the volume in a moment To restore the volume, press again, or FADE MUTING adjust the volume level. 4, x FADE MUTING SOUND MODE VOLUME Adjusting the Sound HBS +/– Remote ONLY To reinforce the bass sound—HBS
ページ15に含まれる内容の要旨
UX-G200[J].BOOK Page 12 Tuesday, December 2, 2008 3:05 PM Setting the Clock Turning Off the Power Automatically Set the clock before using the Daily Timer (see page 16). —Sleep Timer • You can set the clock only when the System is turned off (on standby). 1 Activate the sleep timer mode. 2 sec. 1 Turn off (standby) the System. CLOCK/ SLEEP SLEEP 2 Specify the shut-off time (in minutes). 2 Activate the clock setting mode. CLOCK/ 2 sec. SLEEP REPEAT1GROUP 10 20 30 40 50 CLOCK/ TRACK WMA SLEEP
ページ16に含まれる内容の要旨
UX-G200[J].BOOK Page 13 Tuesday, December 2, 2008 3:05 PM Advanced Disc/USB Mass Storage Class Device Operations Programming the Playing Order— Remote control Program Play You can arrange the playing order of the tracks (up to 32) before you start playback. • You can repeat the programmed tracks by pressing REPEAT. Number 1 Select the source. buttons DISPLAY/ USB PROGRAM MEMORY CD STOP USB CD 6 or MEMORY 6 4, x STOP 7 TUNING/ 2 Before starting playback, activate Program Play. GROUP REPE
ページ17に含まれる内容の要旨
UX-G200[J].BOOK Page 14 Tuesday, December 2, 2008 3:05 PM (2) Select a track. To check the programmed contents PRESET While the PROG. indicator lights up on the display and playback is stopped... DISPLAY/ PROGRAM PROG. MP3 CD To modify the program Track number While the PROG. indicator lights up on the display and 4 Confirm the selection. playback is stopped... DISPLAY/ Edit: PROGRAM 1 Press DISPLAY/PROGRAM repeatedly until the program step you want to edit is displayed. 2 Perform the step
ページ18に含まれる内容の要旨
UX-G200[J].BOOK Page 15 Tuesday, December 2, 2008 3:05 PM Remote Remote ONLY ONLY Playing at Random—Random Play Playing Repeatedly—Repeat Play You can play back all the tracks at random. You can play back tracks repeatedly. 1 Select the source. For audio CD: USB REPEAT MEMORY CD STOP REPEAT1 REPEAT or Canceled (No indication) For MP3/WMA: 2 Start Random Play. REPEAT REPEAT1 REPEAT RANDOM REPEAT GROUP Canceled (No indication)* Playback starts in the random order. Random Play ends when all trac
ページ19に含まれる内容の要旨
UX-G200[J].BOOK Page 16 Tuesday, December 2, 2008 3:05 PM Daily Timer Operations Setting the Daily Timer Remote control Using the Daily Timer, you can wake up with music, etc. • Set the clock before setting the Daily Timer. (See page 12.) • To exit from the timer setting, press STOP 7 as required. TIMER 1 Activate the Daily Timer setting. 2 sec. TIMER USB MEMORY 6 FM/AM/ CD 6 AUDIO IN 4, x STOP 7 TIMER 2 Set the On Time. (1) Set the hour. PRESET TIMER Main unit (2) Set the minutes as the ho
ページ20に含まれる内容の要旨
UX-G200[J].BOOK Page 17 Tuesday, December 2, 2008 3:05 PM (2) Set the hour. 6 Turn off the System. PRESET TIMER To deactivate the Daily Timer When the System is turned on... TIMER (3) Set the minutes as the hour setting above. You cannot set On time and Off time on the same time setting. 4 Select the playback source. The (Timer) indicator on the display and the TIMER (1) Proceed to the playback source setting. lamp on the main unit go off. • When both the Daily Timer and the Sleep Timer ar
