ページ1に含まれる内容の要旨
Cover_GD7[B].fm Page 1 Wednesday, March 9, 2005 3:19 PM
MICRO COMPONENT SYSTEM
UX-GD7—Consists of CA-UXGD7 and SP-UXGD7
INSTRUCTIONS
LVT1348-003A
[B]
ページ2に含まれる内容の要旨
Safety[B].fm Page 1 Wednesday, March 9, 2005 3:17 PM Warnings, Cautions and Others IMPORTANT for the U.K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. If nonetheless the mains plug is
ページ3に含まれる内容の要旨
Safety[B].fm Page 2 Wednesday, March 9, 2005 3:17 PM G-2
ページ4に含まれる内容の要旨
Safety[B].fm Page 3 Wednesday, March 9, 2005 3:17 PM SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. ✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮ Do read the operating instructions before you attempt to use the equipment. Do ensure that all electrical connect
ページ5に含まれる内容の要旨
UX-GD7[B]_EN.book Page 1 Wednesday, April 20, 2005 4:59 PM CONTENTS Introduction ............................................................2 On-Screen Disc Operations ..................................28 Precautions .......................................................................... 2 On-screen Bar Information ............................................... 28 How to Read This Manual .................................................. 2 Operations Using t
ページ6に含まれる内容の要旨
UX-GD7[B]_EN.book Page 2 Wednesday, April 20, 2005 4:59 PM Introduction • If you are not going to operate the System for an extended Precautions period of time, unplug the AC power cord from the wall Installation outlet. • Install in a place which is level, dry and neither too hot nor If anything goes wrong, unplug the AC power cord and too cold—between 5°C and 35°C. consult your dealer. • Install the System in a location with adequate ventilation to prevent intern
ページ7に含まれる内容の要旨
UX-GD7[B]_EN.book Page 3 Wednesday, April 20, 2005 4:59 PM Getting Started Step 1: Unpack Step 1:Unpack the package and check the accessories. After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied. • FM antenna (1) • AM loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately. Step 2: Prepare the Remote Control Insert the batteries into the
ページ8に含まれる内容の要旨
UX-GD7[B]_EN.book Page 4 Wednesday, April 20, 2005 4:59 PM Step 3: Hook Up If you need more detailed information, see page 6. Illustrations of the input/output terminals below are typical examples. When you connect other components, refer also to their AM loop antenna (supplied) manuals, since the terminal names actually printed on the rear Turn it until the best reception is may vary. obtained. Turn off all components before connections. AUDIO INPUT SUBWOOFER Audio cord (not supplied)
ページ9に含まれる内容の要旨
UX-GD7[B]_EN.book Page 5 Wednesday, April 20, 2005 4:59 PM For better FM/AM reception Outdoor FM antenna (not supplied) Vynile-covered wire (not supplied) Extend it horizontally. AM loop antenna Keep it connected. Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector (IEC or DIN45325). FM antenna (supplied) Extend it so that you can obtain the best reception. SUBWOOFER OUT ANTENNA FM 75Ω VIDEO OUT SELECTOR RGB AM LOOP AM EXT Y/
ページ10に含まれる内容の要旨
UX-GD7[B]_EN.book Page 6 Wednesday, April 20, 2005 4:59 PM Remote To assemble and connect the AM loop antenna ONLY Changing the Scanning Mode To assemble the AM loop antenna This System supports progressive scanning. If you connect a progressive TV through the COMPONENT jacks, you can enjoy a high quality picture from the built-in DVD player by selecting progressive mode. And in that case, set the VIDEO OUT SELECTOR to Y/C (see below). PROGRE INTER To connect the AM loop ant
ページ11に含まれる内容の要旨
UX-GD7[B]_EN.book Page 7 Wednesday, April 20, 2005 4:59 PM Before Operating the System If a DVD with the improper Region Code numbers is loaded, Playable Disc Types “RGN ERR (REGION CODE ERROR)” appears on the display and playback will not start. This System has been designed to play back the following discs: Caution for DualDisc playback: Region The Non-DVD side of a “DualDisc” does not comply with the Video Disc Type Mark (Logo) Code* “Compact
ページ12に含まれる内容の要旨
UX-GD7[B]_EN.book Page 8 Wednesday, April 20, 2005 4:59 PM Display Indicators The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 2 3 45 6 7 8 9 r u p q w e t y 1 Disc tray indicators p Disc operation indicators •: Lights when Repeat mode is activated. • 1–5: Disc tray number indicators • (tray indicator): • 1: Lights when One Track
ページ13に含まれる内容の要旨
UX-GD7[B]_EN.book Page 9 Wednesday, April 20, 2005 4:59 PM Indications on the main display while operating a disc While playing back a disc: While disc play is stopped: • DVD Video: • DVD Video: Chapter no. Elapsed playing time Total titles/playlists no. • By pressing SHIFT+0 (DISPLAY), you can see the current title and chapter numbers for a few seconds. • DVD-VR: • DVD-VR: Chapter no. Elapsed playing time • By pressing SHIFT+0 (DISPLAY), you can see the clock indication. • DVD Audio: • D
ページ14に含まれる内容の要旨
UX-GD7[B]_EN.book Page 10 Wednesday, April 20, 2005 4:59 PM Daily Operations—Playback 1 Turn on the power. The STANDBY lamp on the main unit turns off. SET • Without pressing AUDIO , the System turns on 1 by pressing one of the source selecting buttons in the Numeric next step. buttons DISPLAY 2 Select the source. 2 Playback automatically starts if the selected source 8 1/¡ is ready to start. RETURN DISC • If you press AUX or USB, start playback on the SELECT external component
ページ15に含まれる内容の要旨
UX-GD7[B]_EN.book Page 11 Wednesday, April 20, 2005 4:59 PM Remote Listening to the Radio ONLY To preset the stations You can preset 30 FM and 15 AM stations. To select the band—FM or AM 1 Tune in to a station you want to preset. • You can also store the monaural reception mode for FM preset stations if selected. 2 Activate the preset entry mode. To tune in to a station While FM or AM is selected... Remote control: Main unit: • Finish the following process whil
ページ16に含まれる内容の要旨
UX-GD7[B]_EN.book Page 12 Wednesday, April 20, 2005 4:59 PM On-screen guide icons Playing Back a Disc • During playback, the following icons may appear on the • For MP3/JPEG/DivX playback, see “Operations on the TV screen: CONTROL Screen” on page 31. At the beginning of a scene containing multi- To insert a disc angle views. You can insert a disc while playing another source. At the beginning of a scene containing multi- Main Unit: audio sounds. At the beginning
ページ17に含まれる内容の要旨
UX-GD7[B]_EN.book Page 13 Wednesday, April 20, 2005 4:59 PM Remote 7 For DVD Video/DVD Audio: ONLY To locate a particular position 1 Show the disc menu. While playing a disc except MP3/JPEG... x2 x5 x10 x20 x60 x2 x5 x10 x20 x60 2 Select an item on the disc menu. • No sound comes out while searching on DVD Video/ DVD-VR/SVCD/VCD/DivX. To return to normal playback, press DVD/CD 3. Remote ONLY To locate an item directly You can select a title/playlist/chapter
ページ18に含まれる内容の要旨
UX-GD7[B]_EN.book Page 14 Wednesday, April 20, 2005 4:59 PM 2 Select an item on the disc menu. 7 For DVD-VR: DVD-VR format has the following two ways of playing. • Original program (ORIGINAL PROGRAM): The System can play back items in a DVD-VR disc in the recorded order conventionally. • Playlist (PLAY LIST): The System can play back the playlist edited with the DVD recording equipment. • You cannot use this function while displaying the pull- 1 Show the ORIGINAL P
ページ19に含まれる内容の要旨
UX-GD7[B]_EN.book Page 15 Wednesday, April 20, 2005 4:59 PM Playing Back from the PC Playing Back from Other Equipment This System is equipped with a USB terminal on the front To connect other equipment panel. You can connect your PC to this terminal and enjoy By using a stereo mini plug cord (not supplied), you can the sound out of your PC. connect other equipment with analog audio output jacks, When you connect your PC for the first time, follow the su
ページ20に含まれる内容の要旨
UX-GD7[B]_EN.book Page 16 Wednesday, April 20, 2005 4:59 PM Daily Operations—Sound&Other Adjustments Adjusting the Volume Remote control You can adjust the volume level from level 0 (VOL MIN) to level 31 (VOL MAX). Remote control: Main unit: SET CANCEL A.STANDBY DISPLAY DIMMER SLEEP CLOCK/ TIMER FADE Remote BASS/TREBLE ONLY MUTING To drop the volume in a moment AUDIO VOL To restore the volume, press again, or +/– adjust the volume level. ENTER 2,3,5,∞ (CLEAR VOICE)/ VFP D
