ページ1に含まれる内容の要旨
User Guide
HD Radio Tuner
NS-HDTUNE
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
NS-HDTUNE Insignia NS-HDTUNE HD Radio Tuner Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . 1 Safety information . . . . . . . . . . . . . . . . . . 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting up your radio . . . . . . . . . . . . . . . .13 Using your radio . . . . . . . . . . . . . . . . . . .19 Troubleshooting. . . . . . . . . . . . . . . . . . . .21 Specifications . . . . . . . . . . . . . . . . . . . . .22 Legal notices. . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
NS-HDTUNE Safety information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your raido. This label is located on the back of your radio. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your radio. Important safety instructions 1
ページ5に含まれる内容の要旨
NS-HDTUNE 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electric
ページ6に含まれる内容の要旨
NS-HDTUNE � Do not cover the ventilation openings with any items, such as newspapers, tablecloths, or curtains. � Do not place objects on top of your radio, such as vases or candles. � Do not use your radio in an area with extremely high or low temperature. � Do not expose your radio to dripping or splashing water. If your radio gets wet, an electrical short may occur which can lead to a shock or fire. � The power cord is the main disconnect device for your radio. Make sure that the powe
ページ7に含まれる内容の要旨
NS-HDTUNE Front 1 2 3 4 5 6 7 8 9 10 # Component Description 1 Power button Press to turn on your radio or put it into standby mode. 2 Number buttons Press a number button for more than two seconds to store the currently playing station to a preset number. Press to go to a stored (preset) station. 3 HD logo Lights when your radio is tuned to an HD broadcast. Blinks when your raido is tuning to an HD broadcast. 4 LCD Shows status information. 5 Remote control Receives signals from the remote
ページ8に含まれる内容の要旨
NS-HDTUNE # Component Description 8 PRESET / Press to go to the next or previous buttons preset station. 9 TUNING knob Turn the knob clockwise to tune to a higher frequency, or turn it counter-clockwise to tune to a lower frequency. 10 AM/FM button Press to switch between AM, FM1. amd FM2 tuning bands. Back 2 3 4 1 5 7 6 # Component Description 1 COAXIAL jack Connect a coaxial audio cable to this jack and to the COAXIAL IN jack on a sound system to listen to your radio through the soun
ページ9に含まれる内容の要旨
NS-HDTUNE # Component Description 3 LINE OUT jacks Connect a standard audio cable to these jacks and to the LINE IN or AV L and R audio jacks on a sound system to listen to your radio through the sound system. 4 FM antenna Connect the FM antenna to this connector connector. 5 Power cord Connect the power cord to a power outlet. 6 AM antenna Connect the AM antenna to this connector connector. 7 POWER ON/OFF Press this switch to turn the power on switch and off. The button on the front of
ページ10に含まれる内容の要旨
NS-HDTUNE Remote control 5 1 2 3 6 4 7 # Button Description 1 Power Press to turn on your radio or to put it into standby mode. 2 Numbers Press a number button for more than two seconds to store the currently playing station to a preset number. Press to go to a stored (preset) station. www.insignia-products.com 8
ページ11に含まれる内容の要旨
NS-HDTUNE # Button Description 3 SEEK Press to go to the next FM, AM, or HD radio station. The button will not tune to an HD radio multicast station. 4 PRESET / Press to go to the next or previous preset station. 5 AM/FM Press to switch between AM, FM1, and FM2 tuning bands. 6 TUNE / Press to tune to a station with a higher or lower frequency. 7 HD SEEK Press to go to the next HD radio station or HD radio multicast station. www.insignia-products.com 9
ページ12に含まれる内容の要旨
NS-HDTUNE LCD display HD radio broadcast display When receiving an HD radio broadcast, the following information appears on the LCD. 1 2 3 4 5 6 7 # Description 1 Shows the frequency band, AM, FM1, or FM2. 2 Station call letters 3 HD radio broadcast indicator 4 Signal strength 5 Broadcast frequency 6Artist 7 Song title or radio show title www.insignia-products.com 10
ページ13に含まれる内容の要旨
NS-HDTUNE RBDS radio broadcast display When receiving an RBDS radio broadcast, the following information appears on the LCD. 1 2 3 4 5 # Description 1 Shows the frequency band, AM, FM1, or FM2 2 Station call letters 3 Broadcast frequency 4 Genre 5RBDS text Changing frequency examples Display Description Entering AM radio www.insignia-products.com 11
ページ14に含まれる内容の要旨
NS-HDTUNE Display Description Pressing SEEK in AM/FM mode (the frequency will go up or down step by step) Pressing HD SEEK (the frequency will go up or down step by step) www.insignia-products.com 12
ページ15に含まれる内容の要旨
NS-HDTUNE Setting up your radio Installing the remote control battery To install the remote control battery: 1 Press in and hold the battery release clip (1) on the back of the remote control while pulling the battery bracket (2) out of the remote control. 2 1 2 Place the battery in the bracket with the + symbol facing out. When the battery is in the bracket, the + symbol should be visible. www.insignia-products.com 13
ページ16に含まれる内容の要旨
NS-HDTUNE 3 Push the battery bracket into the battery compartment until it clicks into place. Notes � If the remote control only works within a short distance from your radio, replace the battery. � If you do not plan to use the remote control for an extended period of time or if you plan to store the remote control, remove the battery. � When you replace the battery, make sure that you use a battery of the same type and voltage. The battery is a CR2025 3 V battery. � Dispose of used ba
ページ17に含まれる内容の要旨
NS-HDTUNE Connecting the antennas To connect the antennas: 1 Connect the FM antenna to the FM connector on the back of your radio, then connect the AM antenna to the AM connector on the back of your radio. FM antenna AM antenna 2 Fully extend the antenna wires. You may need to adjust the antennas to get the best reception. Turning on power Your radio has a POWER ON/OFF switch on the back. The Power button on the front of your radio and on the remote control puts your radio in standby mode,
ページ18に含まれる内容の要旨
NS-HDTUNE Connecting to a sound system You can connect your radio to a sound system using a coaxial audio, optical, or standard audio cable. To connect to a sound system using a coaxial audio cable: 1 Make sure that your radio and the sound system are turned off and the power cords are unplugged. 2 Connect one end of a coaxial audio cable to the COAXIAL jack on the back of your radio. Coaxial audio cable 3 Connect the other end of the cable to the COAXIAL IN jack on a sound system. 4 Recon
ページ19に含まれる内容の要旨
NS-HDTUNE To connect to a sound system using an optical audio cable: 1 Make sure that your radio and the sound system are turned off and the power cords are unplugged. 2 Connect one end of a coaxial audio cable to the OPTICAL jack on the back of your radio. Optical audio cable 3 Connect the other end of the cable to the OPTICAL IN jack on a sound system. 4 Reconnect the power cables, then turn on your radio and the sound system. 5 Select the audio input on your sound system that matches t
ページ20に含まれる内容の要旨
NS-HDTUNE To connect to a sound system using a standard audio cable: 1 Make sure that your radio and the sound system are turned off and the power cords are unplugged. 2 Connect one end of a standard AV audio cable to the LINE OUT jacks on the back of your radio. Standard AV audio cable 3 Connect the other end of the cable to the LINE IN or AV AUDIO IN jacks on a sound system. 4 Reconnect the power cables, then turn on your radio and the sound system. 5 Select the audio input on your sound
