ページ1に含まれる内容の要旨
AV SURROUND RECEIVER
AVR-5800
OPERATING INSTRUCTIONS
MASTER VOLUME
INPUT SELECTOR
VOLUME LEVEL
REMOTE SENSOR
INPUTSIGNAL
SURROUND
LOCK DIGITAL AL24 BACK CH
OUTPUT
INPUT MODE
PCM RF
AUTO DTS SIGNAL
DETECT ¥))
ON / STANDBY
HOME SURROUND SPEAKER
PHONO CD TUNER DVD VDP TV DBS / SAT VCR-1 VCR-2 VCR-3 V. AUX CDR / TAPE-1 MD / TAPE-2
THX CINEMA PURE DIRECT A B
SURROUND MODE MULTI FUNCTION
DOLBY DTS WIDE 5CH / 7CH DSP MODE FUNCTION CONTROL
DIRECT STEREO SURROUND SURROUND SCREEN STEREO SIMULATION STATUS
ページ2に含まれる内容の要旨
2 SAFETY PRECAUTIONS CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTERODUIRE LA USER-SERVICEABLE PARTS INSIDE. REFER LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE SERVICING TO QUALIFIED SERVICE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’ AU PERSONNEL. FOND. The lightning flash with arrowhead symbol, within an equilateral triangl
ページ3に含まれる内容の要旨
SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating 12. Power-Cord Protection – Power-supply cords should be instructions should be read before the appliance is routed so that they are not likely to be walked on or operated. pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience 2. Retain Instructions – The safety and operating instructions receptacles, and the point where they exit from the should be retained for future refer
ページ4に含まれる内容の要旨
2 INTRODUCTION Thank you for choosing the DENON AVR-5800 Digital Surround A / V receiver. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. As this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding. TABLE OF
ページ5に含まれる内容の要旨
3 CAUTIONS ON HANDLING • Switching the input function when input jacks are not • Whenever the power switch is in the STANDBY state, the connected apparatus is still connected on AC line voltage. A clicking noise may be produced if the input function is switched Please be sure to unplug the cord when you leave home for, when nothing is connected to the input jacks. If this happens, say, a vacation. either turn down the MASTER VOLUME control or connect components to the input jacks. • Muting of PR
ページ6に含まれる内容の要旨
5 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Note that binding pin plug cords together with AC cords or placing them near a power • Be sure to connect the left and right channels properly (left with left, right with right). transformer will result in generating hum or other noise. • Insert the plugs securely. Incomplete connections will result in the generation of • Noise or humming may be generated if a connected audio equipment is used noise. independ
ページ7に含まれる内容の要旨
Connecting video components • To connect the video signal, connect using a 75 Ω/ohms video signal cable cord. Using an improper cable can result in a drop in picture quality. • When making connections, also refer to the operating instructions of the other components. Connecting a TV/DBS tuner TV or DBS tuner TV/DBS VIDEO • Connect the TV’s or DBS tuner’s video output jack (VIDEO OUTPUT) to the (yellow) TV/DBS IN jack using a AUDIO VIDEO OUT 75 Ω/ohms video coaxial pin plug cord. R L OUT AUDIO •
ページ8に含まれる内容の要旨
Connecting a video component equipped with S-Video jacks • When making connections, also refer to the operating instructions of the other components. • A note on the S input jacks The input selectors for the S inputs and pin jack inputs work in conjunction with each other. • Precaution when using S-jacks This unit’s S-jacks (input and output) and video pin jacks (input and output) have independent circuit structures, so that video signals input from the S-jacks are only output from the S-jack o
ページ9に含まれる内容の要旨
Connecting a Video Component Equipped with Color Difference (Component - Y, R-Y, B-Y) Video Jacks (DVD Player) • When making connections, also refer to the operating instructions of the other components. • The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jac
ページ10に含まれる内容の要旨
Connecting the antenna terminals DIRECTION OF BROADCASTING AM LOOP ANTENNA STATION (Supplied) FM ANTENNA F-type converter plug (attached) FEEDER • When using the FM antenna CABLE attach to this apparatus 75 Ω/ohms COAXIAL CABLE FM INDOOR 300 Ω/ohms ANTENNA (Supplied) FM ANTENNA 300 Ω/ohms AM OUTDOOR ADAPTER TERMINALS ANTENNA (Supplied) • An F-type FM antenna cable plug can be connected directly. GROUND • If the FM antenna cable’s plug is not of the F-type, connect using the included antenna
ページ11に含まれる内容の要旨
Connecting the external input (EXT. IN) jacks • These jacks are for inputting multi-channel audio signals from an outboard decoder, or a component with a different type of multi-channel decoder, such as a Super Audio DVD player, or a multi-channel SACD player, or other future multi-channel sound format decoder. • When making connections, also refer to the operating instructions of the other components. 1 SAT CENTER VIDEO ANTENNA TERMINALS OUT SURR.-A R AM S-VIDEO LOOP ANT. IN OUT SURR.-B AUDIO R
ページ12に含まれる内容の要旨
Speaker system connections • Connect the speaker terminals with the speakers making sure that like Speaker Impedance polarities are matched ( < with < , > with > ). Mismatching of polarities will • Speakers with an impedance of from 6 to 16 Ω/ohms can be connected for result in weak central sound, unclear orientation of the various instruments, use as front and center speakers. and the sense of direction of the stereo being impaired. • Speakers with an impedance of 6 to 16 Ω/ohms can be connecte
ページ13に含まれる内容の要旨
Connections • When making connections, also refer to the operating instructions of the other components. Connection jack for FRONT SPEAKER SYSTEMS CENTER SPEAKER SYSTEM SURROUND SPEAKER subwoofer with built-in SYSTEMS (A) amplifier (super woofer), etc. ( ) ( ) ( ( ) ) L R L R IN • Precautions when IN IN IN OUT DVD TV DBS / SAT MONITOR Y CB CR Y CB CR Y CB CR Y CB CR FRONT FRONT connecting speakers R L CONPONENT VIDEO If a speaker is placed near MULTI ZONE DVD VDP TV DBS / V. AUX VCR-1 VCR-2 VC
ページ14に含まれる内容の要旨
6 PART NAMES AND FUNCTIONS Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). Power indicator........................................................................(32) DSP SIMULATION button .......................................................(49) q !9 Power switch...........................................................................(32) MULTI FUNCTION STATUS button..........................................(35) w @0 Headphones jack (P
ページ15に含まれる内容の要旨
Remote control unit • For details, refer to the separate (supplied) RC-8000 operating instructions. Transmitter VOL. (volume) up/down buttons q u Touch panel LIGHT (back light) button w i CHANNEL up/down buttons Battery charging contacts e o MUTE button RF frequency selector switch r !0 USB terminal Reset button t !1 Jog stick (PUSH ENTER) Battery cover y !2 The USB terminal is a terminal that will be used in the future to update the microprocessor program, etc. 15
ページ16に含まれる内容の要旨
7 SETTING UP THE SYSTEM • Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 13), make the various settings described below on the monitor screen using the AVR-5800’s on-screen display function. These settings are required to set up the listening room’s AV system centered around the AVR-5800. • Use the following buttons to set up the system: Transmission codes of independent buttons Screen while icons are displayed CHANNEL¥ : Tuner pr
ページ17に含まれる内容の要旨
NOTES: • The on-screen display signals are not output from the MONITOR OUT-2 output jack or the color difference (component) video signal (MONITOR OUT) jacks. • The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor is connected to both the AVR-5800’s S-Video and video monitor output jacks and signals are input to the AVR-5800 from a video source (VDP, etc.) connected to both the S-Video and vide
ページ18に含まれる内容の要旨
Before setting up the system Check that all the connections are 1 ON / STANDBY correct, then turn on the main unit’s 1 power. (Main unit) Either lightly press on the remote control unit’s touch panel or press the LIGHT button to turn on the liquid crystal display. 2 (The back light does not turn on when the touch panel is pressed.) 2, 5, 6, 7, 8 By default the liquid crystal display is set to display for 10 seconds, but this can be changed to approximately 120 3 4, 7, 8 seconds using the procedu
ページ19に含まれる内容の要旨
Setting the type of speakers • The composition of the signals output from the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used. Press “CURSOR/PAGE” at the center of the bottom line on the “AV AMP’s” “SETTING 3/5” page so that this part is displayed in half-tone dot mesh. 1 Make the system setups by pushing the jog stick on the remote control unit forward and backward, left and right. At the System Setup Menu sel
ページ20に含まれる内容の要旨
• Parameters Large................Select this when using speakers that can fully reproduce low sounds of below 80 Hz. Small ................Select this when using speakers that cannot reproduce low sounds of below 80 Hz with sufficient volume. When this setting is selected, low frequencies of below 80 Hz are assigned to the subwoofer. None…… .........Select this when no speakers are installed. Yes/No… ..........Select “Yes” when a subwoofer is installed, “No” when a subwoofer is not installed.
