ページ1に含まれる内容の要旨
AIWA
COMPACT DISC STEREO SYSTEM
NSX-MTD9
OPERATING INSTRUCTIONS
PRECAUTIONS pg. 1
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
"CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL."
Explanation of Graphical Symbols:
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to t
ページ2に含まれる内容の要旨
CX-NMTD9 SX-ND8 SX-C605 SX-R275 PRECAUTIONS Read the Operating Instructions carefully and completely before operating the unit. Be sure to keep the Operating Instructions for future reference. All warnings and cautions in the Operating Instructions and on the unit should be strictly followed, as well as the safety suggestions below. Installation 1 Water and moisture - Do not use this unit near water, such as near a bathtub, washbowl, kitchen sing, laundry tub, in a wet basement, swimming pool,
ページ3に含まれる内容の要旨
Do not walk on the power cord or pinch it by items placed upon or against it, as these could result in fire or shock. - Avoid overloading AC power plugs and extension cords beyond their capacity, as this could result in fire or shock. 4 Extension cord - To help prevent electric shock, do not use a polarized AC power plug with an extension cord, receptacle, or other outlet unless the polarized plug can be completely inserted to prevent exposure of the blades of the plug. 5 Nonuse periods - Unplu
ページ4に含まれる内容の要旨
RADIO RECEPTION MANUAL TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 PRESETTING STATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 TAPE PLAYBACK BASIC OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 CONTINUOUS PLAY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
SX-ND8 Front speakers SX-R275 Surround speakers SX-C605 Center speaker Operating Instructions, etc. POSITIONING THE SPEAKERS To achieve the optimum effects obtainable with the DOLBY PRO LOGIC system, it is important to position the speakers properly. Refer to the following illustration to find out the best location in your room. (1) Front speakers (2) Center speaker Position in the center of the two front speakers. In addition, position on or below the TV set, if connecting a TV set to the unit.
ページ6に含まれる内容の要旨
IMPORTANT Connect the speakers, antennas, and all optional equipment first. Then connect the AC cord. There are no differences between the front speakers as well as the surround speakers. Both speakers of its kind can be connected as L (left) or R (right). 1 Connect the right and left speaker to the main unit. Connect the right speaker cord to SPEAKERS R terminals, and the left to SPEAKERS L terminals. The cords with white stripes should be connected to the terminals and the other cords to the
ページ7に含まれる内容の要旨
5 Connect the video equipment. Connect the VIDEO/AUX jack of this unit to the audio output jack of the video equipment with an optional audio connecting cord. 6 Connect the Television to the video equipment. Refer to the Operating Instructions of the connected equipment for details. 7 Connect the AC cord to an AC outlet. • The game Demo will begin when the AC cord is plugged into an AC outlet. See page 6 "Game Demo" for details. To position the antennas FM feeder antenna: Extend this antenna
ページ8に含まれる内容の要旨
PREPARATIONS (cont) pg. 5 • Be sure to connect the speaker cords correctly. Improper connections can cause short circuits in the SPEAKERS terminals. • Do not leave objects generating magnetism, such as credit cards, near the speakers, as these objects may be damaged. • Do not bring the FM antenna near metal objects or curtain rails. • Do not bring the AM antenna near other optional equipment, the stereo system itself, the AC cord or speaker cords,since noise will be picked up. • Do not un
ページ9に含まれる内容の要旨
When to replace the batteries The maximum operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones. Using the remote control The instructions in this manual refer mainly to the buttons on the main unit. Buttons on the remote control with the same names as those on the main unit can be used as well. / PRESET on the remote control This function is the same as that of
ページ10に含まれる内容の要旨
To turn the power on Press one of the function buttons (TAPE, TUNER, VIDEO/AUX, CD, MD). Playback of the inserted disc begins, or the previously tuned station is received (Direct Play Function). POWER is also available. When the unit is turned on, the disc compartment may open and close to reset the unit. To turn the power off Press POWER. Illumination guides Whenever one of the function buttons is pressed, the buttons for that operation light up or flash. Flash windows The windows of the CD c
ページ11に含まれる内容の要旨
When the AC cord is plugged in for the first time after purchase, the game Demo will begin in the display. When the power is turned on, the game Demo will end. Until the clock is set, the game Demo will automatically begin whenever the power is turned off. To play the game DEMO Press DEMO whether the unit is turned on or odd, and whether the clock has been set or not. With the power switched off, the game is silent. With the power switched on, it is livened up with sound. 1 Press Three n
ページ12に含まれる内容の要旨
PREPARATIONS (cont.) pg. 7 SETTING THE POWER ECONOMIZING MODE Setting this unit power economizing mode reduces power consumption as follows. • When the power is turned off, all the display lights turned off. However, if the clock is not set, the game Demo will begin when the power is turned off. • If CD, Tape or Rhythm play function (page 8) does not play for 10 minutes or if there is no audio input from any connected external equipment for 10 minutes when VIDEO/AUX or MD is selected as the so
ページ13に含まれる内容の要旨
The mode will be automatically set after 4 seconds. It will also be set if ENTER is pressed within 4 seconds after step 3. To view the clock when all the display lights turn off, press CLOCK so that the time is displayed for 4 seconds. SOUND pg. 7 AUDIO ADJUSTMENTS VOLUME Turn VOLUME on the main unit, or press VOL on the remote control. The volume level is displayed as a number from 0 to MAX (50). The volume level is automatically set to 20 when the power is turned off with the volume lev
ページ14に含まれる内容の要旨
• When playing back a tape recorded with BBE, it is recommended that BBE be set to off to avoid distorted high frequency sound. • The BBE system does not perform wile the 5.1 CH (page 30) or the DOLBY PRO LOGIC (page 23) is selected. SOUND (cont) pg. 8 SUPER T-BASS SYSTEM The T-BASS system enhances the realism of low frequency sound. Press T-BASS. Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference. Low frequency sound may be
ページ15に含まれる内容の要旨
1 Press BEAT ON/OFF to switch the function on. One of the rhythm patterns is displayed. 2 Turn MULTI JOG to select the desired rhythm pattern. The rhythm pattern is displayed cyclically as follows. The Rhythm Play function is canceled when the 5.1 CH (page 30) is selected. These voice wave data incorporated in this product are Yamaha Corporation's copyrightable property and we are licensed by Yamaha Corporation. SOUND (cont) pg. 9 To adjust the tempo of the rhythm patte
ページ16に含まれる内容の要旨
The tempo of GAME is not adjustable. To change the volume level of the rhythm pattern 1 Press RHYTHM repeatedly until "LEVEL X" is displayed. 2 Turn MULTI JOG. Three levels, 1-3, are available. To stop the beat function Press BEAT ON/OFF. BEAT toggles between On and Off. When you interrupt or stop the playback of the sound source, the BEAT function is automatically switched off. Using the AUTO mode The AUTO mode automatically adjusts the tempo of the current rhythm pattern so it coincides with
ページ17に含まれる内容の要旨
You can let the music start playing before performing step 1 or later at the desired moment. 1 Press BEAT ON/OFF to switch the function on. You will hear the current rhythm pattern. 2 Turn MULTI JOG to select the desired rhythm pattern. 3 Press RHYTHM once while the selected rhythm pattern is displayed, then turn MULTI JOG to select "AUTO". While the unit is trying to get synced up to the tempo of the music, a cascade-like indicator will flash on the sides of the graphic equalizer display sectio
ページ18に含まれる内容の要旨
The AUTO SPICE/FILL IN double function switch takes on the FILL IN function when the BEAT function is switched On. • The AUTO SPICE function is not available at the same time as the FILL IN function. • The FILL IN function is not available when making a tape copy between two tape decks using SYNC DUB. • The FILL IN function is not available for the GAME rhythm. To use the FILL IN function During playback with the BEAT function switched on, press FILL IN at the desired moment. "FILL IN" is displa
ページ19に含まれる内容の要旨
You'll hear the current sound stored at A. 2 Within 4 seconds, turn MULTI JOG to select the desired sound. As the display changes, you'll hear the respective sound. 3 In a similar way, select a sound for SPICE B. 4 Play the music source and hit SPICE A or B in time with the music as in playing percussion instruments. The SPICE A/B function cannot be used when making a tape copy between two tape decks using SYNC DUB. Using the scratch mode 1 Hold down SPICE A. (Don't release the button until you
ページ20に含まれる内容の要旨
1 Press AUTO SPICE to display "A-SPICE". 2 Press SPICE A. You'll hear the sound currently stored in A its name appearing in the display. 3 While the sound name is displayed, turn MULTI JOG to select the desired sound. (Repeat step 2 if sound name disappears before turning MULTI JOG). 4 Press SPICE B and repeat step 3 to select the desired sound for B. 5 To adjust the level of the A and B sounds, press RHYTHM repeatedly until "LEVEL X" is displayed, then turn MULTI JOG within 4 seconds. Three lev
