ページ1に含まれる内容の要旨
3-865-708-43 (1)
Personal Audio
System
GB
Operating Instructions page 2
GB
ES
Manual de instrucciones página 2
ES
PHC-ZW770L
1999 by Sony Corporation
ページ2に含まれる内容の要旨
Warning To prevent fire or shock hazard, do not expose the player to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Information For customers in Europe This Compact Disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT label is located at the rear. Warning Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Notice for customers in the United Kingdom A moulded plug c
ページ3に含まれる内容の要旨
Basic Operations Table of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape The CD Player Setting Up 12 Using the display 25 Hooking up the system 13 Locating a specific track 28 Selecting the audio emphasis (SOUND/MEGA BASS/5 GB 14 Playing tracks repeatedly BAND GRAPHIC EQUALIZER) (Repeat Play) 15 Playing tracks in random order (Shuffle Play) Additional Information 16 Creating your own program 30 Precautions (Program Play) 32 Troubleshooti
ページ4に含まれる内容の要旨
Basic Operations Playing a CD 1,2 3 For hookup instructions, see pages 25 – 27. 1 Push 6 PUSH OPEN/CLOSE down to open the CD compartment and place the CD on the CD compartment. With the label side up 2 Close the lid of the CD compartment. 3 Press ^. Display The player turns on (direct power-on) and plays all the tracks once. Track number Playing time GB 4 Basic Operations
ページ5に含まれる内容の要旨
Basic Operations Use these buttons for additional operations OPERATE 6 PUSH OPEN/CLOSE p ^ VOLUME +, – =, + Tip To Press Next time you want to adjust the volume VOLUME +, – listen to a CD, just press ^. The player turns on (VOL +, – on the remote) automatically and starts stop playback p playing the CD. pause playback ^ ( P on the remote) Press the button again to resume play after pause. go to the next track + go back to the previous track = remove the CD 6 PUSH OPEN/CLOSE turn on/off the playe
ページ6に含まれる内容の要旨
Listening to the radio 1 2 For hookup instructions, see pages 25 – 27. Display 1 Press RADIO BAND until the band you want appears in the display (direct power-on). Indicates an FM stereo 2 Hold down TUNE•TIME SET + broadcast or – (TUNE + or – on the remote) until the frequency digits begin to change in the display. The player automatically scans the radio frequencies and stops when it finds a clear station. If you cannot tune in to a station, press the button repeatedly to change the frequency s
ページ7に含まれる内容の要旨
Basic Operations Use these buttons for additional operations VOLUME +, – OPERATE MODE Tips To Press • If the FM broadcast is adjust the volume VOLUME +, – noisy, press MODE until “Mono” appears in the (VOL +, – on the remote) display and radio will turn on/off the radio OPERATE play in monaural. • Next time you want to listen to the radio, just To improve broadcast reception press RADIO BAND. Reorient the antenna for FM. Reorient the player itself The player turns on automatically and starts for
ページ8に含まれる内容の要旨
Playing a tape 2 12 1 For hookup instructions, see pages 25 – 27. 1 Press p6 to open the tape compartment and insert a recorded tape. Use TYPE I (normal) tape only. Close the compartment. With the side you want to play facing you Display 2 Press (. The player turns on (direct power-on) and starts playing. GB 8 Basic Operations
ページ9に含まれる内容の要旨
Basic Operations Use these buttons for additional operations OPERATE VOLUME +, – 0, ) p6 P 0, ) p6 P Note To Press During playback, do not adjust the volume VOLUME +, – press buttons on the other deck. Otherwise (VOL +, – on the remote) the playback speed may stop playback p6 change. fast-forward or rewind the tape ) or 0 Tip pause playback P Next time you want to Press the button again to listen to a tape, just resume play after pause. press (. The player turns on automatically eject the casset
ページ10に含まれる内容の要旨
Recording on a tape 2 31 For hookup instructions, see pages 25 – 27. 1 Press p6 to open the tape compartment on deck B and insert a blank tape. Use TYPE I (normal) tape only. With the side you want to record on facing you 2 Select the program source you want to record. Display To record from the CD player: insert a CD (see page 4) and press CD. To record from the radio: tune in the station you want (see page 6). To record from the tape (dubbing): insert a recorded tape into deck A and press TAP
ページ11に含まれる内容の要旨
Basic Operations Deck B 3 Start recording. To record from the CD player and the radio, press r on deck B (( is depressed automatically). Deck A To record from the tape, press r on deck B ((is depressed automatically). Then press ( on deck A. (For high speed dubbing, press HIGH-SPEED DUBBING instead of ( on deck A). Tips Use these buttons for additional operations • Adjusting the volume or the audio emphasis (see OPERATE pages 28 and 29) will not affect the recording level. • If the MW/LW program
ページ12に含まれる内容の要旨
The CD Player Using the display DISPLAY ENT MEM You can check information about the CD using the display. Checking the total track numbers and playing time Press DISPLAY ENT MEM in stop mode. If the CD has more than 12 tracks, “OVER 12” appears in the display. Total playing time Total track number Music calendar Checking the remaining time Press DISPLAY ENT MEM while playing a CD. The track numbers in the music calendar disappear after they are played. To display Press DISPLAY ENT MEM the curren
ページ13に含まれる内容の要旨
The CD Player Locating a specific track You can quickly locate any track using the number buttons on the remote. You can also find a specific point in a track while playing a CD. Number buttons = , + Note To locate Press You cannot locate a a specific track directly number button of the track specific track if on the remote “SHUF” or “PGM” is lit in the display. Turn off a point while listening to + (forward) or = the indication by the sound (backward) while playing pressing p. and hold down u
ページ14に含まれる内容の要旨
Playing tracks repeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes Number (see pages 15 and 16). buttons MODE p ( 1 Press p. “Cd” appears in the display. On the player 2 Proceed as follows. • Use ^ instead of (. To repeat Do this • When you have a single track 1 Press MODE until “REP 1” selected “REP 1”, appears. select the track by 2 Press the number buttons pressing = or to select the track that you +, then press ^. want to repeat. all the tracks 1
ページ15に含まれる内容の要旨
The CD Player Playing tracks in random order (Shuffle Play) You can play tracks in random order. MODE p ( 1 Press p. “Cd” appears in the display. 2 Press MODE until “SHUF” appears in the display. On the player 3 Press ( to start shuffle play. Use ^ instead of (. To cancel Shuffle Play Press MODE until “SHUF” disappears from the display. GB The CD Player 15
ページ16に含まれる内容の要旨
Creating your own program (Program Play) You can make a program of up to 20 tracks in the order you want them to be Number played. buttons MODE p ( On the player 1 Press p. 1 Press p. “Cd” appears in the display. 2 Press MODE until “PGM” appears in 2 Press MODE until “PGM” appears in the display. the display. 3 Press the number buttons for the tracks you want 3 Press = or + then press DISPLAY to program in the order you want. ENT MEM for the tracks you want to program in the order you want. 4 Pr
ページ17に含まれる内容の要旨
The CD Player Tips To cancel Program Play • You can play the same Press MODE until “PGM” disappears from the program again, since the display. program is saved until you open the disc compartment. To check the order of tracks before play • You can record your own Press DISPLAY ENT MEM on the player. program. After you’ve created the program, Every time you press the button, the track number insert a blank tape into appears in the programed order. deck B and press r on deck B to start recording.
ページ18に含まれる内容の要旨
Enjoying sound effects (LOOP/FLASH) You can repeat part of a CD (LOOP) and can “flash” the CD sound (FLASH) during playback. LOOP FLASH 1 Play a CD. 2 Press and hold LOOP or FLASH at the point you want to start the function. To Press and hold repeat a selected part of a CD LOOP “flash” the CD sound FLASH To cancel the LOOP or FLASH function Release the button. The player returns to normal play. GB 18 The CD Player
ページ19に含まれる内容の要旨
The Radio The Radio Presetting radio stations You can store radio stations into the player’s memory. You can preset up to Number 30 radio stations, 10 for each band in any buttons order. TUNE +, – BAND On the player 1 Press BAND until the band you want appears in 1 Press RADIO BAND the display. to select the band. 2 Set the frequency to the station you want. 2 Set the frequency to the station you want. 3 Press and hold the number buttons that you want 3 Press and hold to preset the new station o
ページ20に含まれる内容の要旨
Playing preset radio stations Once you have preset the stations, use the number buttons on the remote or Number PRESET +/– on the player to tune in to buttons your favorite stations. BAND On the player 1 Press BAND to select the band. 1 Press RADIO BAND 2 Press the number buttons to tune in the stored to select the band. station. 2 Press PRESET + or – to tune in the stored station. GB 20 The Radio
