ページ1に含まれる内容の要旨
4-231-882-11(1)
Compact Hi-Fi
Stereo System
Operating Instructions
LBT-LV100AV
©2000 Sony Corporation
ページ2に含まれる内容の要旨
WARNING This system can play To prevent fire or shock hazard, do not the following discs expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. VIDEO CDs Audio CDs Disc logo Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This appliance is classified as a CLASS 1 LASER product. Contents Audio + Video Audio The CLASS 1 LASER (moving pictures) PRODUCT MARKING is located on the r
ページ3に含まれる内容の要旨
Table of Contents Getting Started DJ Effects Step 1: Hooking up the system ............ 4 Looping part of a CD ........................... 39 Step 2: Setting up the speakers ............ 8 Flashing part of a CD ........................... 39 Step 3: Setting the time ....................... 10 Step 4: Presetting radio stations ........ 11 Sound Adjustment Adjusting the sound ............................ 40 Selecting the audio emphasis ............. 41 Basic Operations Adjusting the audio emphasis
ページ4に含まれる内容の要旨
Getting Started Step 1: Hooking up the system Follow steps 1 through 5 to hook up your system using the supplied cords and accessories. AM loop antenna FM antenna Center speaker Right front Left front speaker speaker Right rear speaker Left rear speaker 4
ページ5に含まれる内容の要旨
FM 75 AM VIDEO VIDEO IN OUT VIDEO 1 Connect the speakers. 2 Connect the FM/AM antennas. 1 Connecting the front speakers Set up the AM loop antenna, then Connect the speaker cords to the connect it. FRONT SPEAKER jacks. Extend the FM wire antenna horizontally. AM loop antenna Red (3) Black (#) 2 Connecting the center speaker Connect the speaker cords to the SURROUND SPEAKER CENTER jacks. 3 Connect the video input jack of your TV to the VIDEO OUT jack of this system using the supplied video conne
ページ6に含まれる内容の要旨
Step 1: Hooking up the system 5 Connect the power cord to a wall (continued) outlet. If your TV automatically changes the The demonstration appears in the color system according to the input display. When you press ?/1, the system signal: turns on and the demonstration automatically stops. The factory setting (AUTO) automatically changes the color system of the video output according to the color system of the current To attach the center speaker feet VIDEO CD. Attach the four center speaker fee
ページ7に含まれる内容の要旨
Inserting two R6 (size AA) Using the remote batteries into the remote You can control Sony TVs using the buttons below. TV/ TV ?/1 VIDEO TV VOL TV CH Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. By pressing You can TV ?/1 Turn on or off the TV TV/VIDEO Select th
ページ8に含まれる内容の要旨
2 Place the center speaker so it is Step 2: Setting up placed at about the same height as the speakers the front speakers (A). Align the center speaker with the front speakers or place it a little behind By connecting the supplied speakers, you can the front speakers’ position (B). enjoy Dolby Pro Logic Surround sound. Dolby Pro Logic Surround is a decoding system standardized in TV programs and A movies. Dolby Pro Logic Surround improves the sound image by using four separate channels. These ch
ページ9に含まれる内容の要旨
Adjusting the speaker 1 Press PRO LOGIC. volume The button lights up. To enjoy Dolby Pro Logic Surround sound, adjust the volume of each speaker using the 2 Press T. TONE on the remote. test tone that the system provides. The test tone is heard from the speakers in the following order. Adjust the volume of the test tone. ?/1 tLEFT t CENTER (Power) 1 VOLUME REAR T RIGHT T 3 From your listening position, press CENTER LEVEL +/– and REAR LEVEL +/– on the remote to adjust the volume levels. The
ページ10に含まれる内容の要旨
Tip If you make a mistake, start over from step 1. Step 3: Setting the To change the time time The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the You must set the time before using the timer following: functions. 1 Press c/CLOCK SET. 2 Press TUNING +/– to select SET CLOCK. 1 2,4 3,5 3 Press ENTER/NEXT. 4 Perform steps 2 through 5 in the previous explanation. Note The clock setting is canceled when you disconnect the pow
ページ11に含まれる内容の要旨
3 Press TUNING +/–. Step 4: Presetting The frequency indication changes and scanning stops when the system tunes in radio stations a station. “TUNED” and “STEREO” (for a stereo program) appear. You can preset the following number of stations: MHz DOLBY NR — 20 for FM and 10 for AM OFF VOLUME The bands you can select depend on the kind ALL DISC S TUNED of tuner built into your system. Confirm the AUTO STEREO bands by pressing TUNER/BAND repeatedly. 4 Press TUNER MEMORY. ?/1 12 3 5 4 (Power) The n
ページ12に含まれる内容の要旨
Presetting radio stations (continued) To erase a preset number 1 Press and hold TUNER MEMORY until a preset number flashes in the display. 2 Press TUNING +/– to select the preset number you want to erase. Select “ALL ERASE” to erase all preset numbers. 3 Press ENTER/NEXT. When you erase a preset number, all the following preset numbers shift up and reduce by one. To change the AM tuning interval The AM tuning interval is factory-preset to 9 kHz (10 kHz in some areas). To change the AM tuning in
ページ13に含まれる内容の要旨
Basic Operations Basic Operations 1 Turn on your TV and select the Playing a VIDEO CD video input. Refer to the instructions included with your TV for details. You can play both VIDEO CDs without PBC functions (Ver. 1.1) and VIDEO CDs with 2 Press PUSH OPEN and place a PBC functions (Ver. 2.0). VIDEO CD on the disc tray. You can enjoy two kinds of playback If the disc is not placed properly, it will according to the disc type. not be recognized. ?/1 With the label (Power) VOLUME side up. When yo
ページ14に含まれる内容の要旨
Tips Playing a VIDEO CD (continued) • Pressing HX while the system power is off automatically turns on the system and starts VIDEO CD playback if there is a VIDEO CD on To Do this the tray (One Touch Play). Stop playback Press x. • You can switch from another source and begin Pause Press HX (or X on the playing a VIDEO CD just by pressing HX, one of 1 the DISC 1 - DISC 5 buttons, or CD N on the remote)* . Press HX again to remote (Automatic Source Selection). resume playback (or CD N on • If the
ページ15に含まれる内容の要旨
Basic Operations 1 Press PUSH OPEN and place a CD Playing a CD on the disc tray. — Normal Play If the disc is not placed properly, it will not be recognized. You can play up to five CDs in a row. With the label side up. ?/1 When you play (Power) VOLUME a CD single, place it on the inner circle of the tray. 2 Press DISC SKIP (or D.SKIP on the remote) to place up to four more CDs on the tray. The disc tray rotates so that you can insert other CDs. 3 Close the front cover. 4 Press one of the DISC 1
ページ16に含まれる内容の要旨
Playing a CD (continued) Recording a VIDEO To Do this CD/CD Stop playback Press x. — CD Synchro Recording Pause Press HX (or X on the remote). This function lets you easily record from a Press HX again to resume CD to a tape. You can use TYPE I (normal) or playback (or CD N on the TYPE II (CrO2) tapes. The recording level is remote). automatically adjusted. Select a track During playback or pause, turn the jog dial clockwise (to go ?/1 forward) or counterclockwise (to (Power) 1 DSP x h go backwa
ページ17に含まれる内容の要旨
Basic Operations 3 Close the front cover. Listening to the 4 Press DISC SKIP repeatedly until radio the number of the disc you want to — Preset Tuning record from appears in the playing position indicator. Before using this function, preset radio stations in the tuner’s memory (see “Step 4: Presetting radio stations” on page 11). 5 Press CD SYNC. Deck B stands by for recording, the CD ?/1 STEREO/ player stands by for playback, and the (Power)12 3 MONO VOLUME indicator on the H button (for the fr
ページ18に含まれる内容の要旨
Tips Listening to the radio • Pressing TUNER/BAND while the system power (continued) is off automatically turns on the system and tunes in the last received station (One Touch Play). 1 Press TUNER/BAND repeatedly • You can switch from another source to the radio by pressing TUNER/BAND (Automatic Source until the desired band appears in Selection). the display. • If an FM program is noisy, press STEREO/ Each time you press this button, the MONO so that “MONO” appears in the display. band changes
ページ19に含まれる内容の要旨
Basic Operations 3 Press TUNING +/– to tune in the Recording from the desired preset station. radio Preset number Frequency MHz You can record a radio program onto a tape DOLBY NR OFF by tuning in a preset station. You can use VOLUME TYPE I (normal) or TYPE II (CrO2) tapes. The ALL DISC S recording level is automatically adjusted. PRESET ?/1 (Power) 1 3 2 DSP 4 Press Z B EJECT and insert a recordable tape into deck B. With the side you want to record on facing forward 5 Press z REC. Deck B stan
ページ20に含まれる内容の要旨
Recording from the radio (continued) Playing a tape Tips • When you want to record on the reverse side, You can play any type of tape, TYPE I press h after pressing z REC in step 5 so that the indicator on the h button (for the reverse side) (normal), TYPE II (CrO2), or TYPE IV (metal). lights up green . The deck automatically detects the tape type. • When you record on both sides, be sure to start You can also use the AMS* functions to from the front side. If you start from the reverse quickly
