ページ1に含まれる内容の要旨
RX-SL80
RX-SL80_GB-cv.fm Page 1 Thursday, August 19, 2004 7:35 PM
GB
LIST OF REMOTE CONTROL CODES ELENCO CODICI DI TELECOMANDO
LISTE DES CODES DE COMMANDE LISTA DE CÓDIGOS DE MANDO A DISTANCIA
LISTE DER FERNBEDIENUNGSCODES LIJST MET AFSTANDSBEDIENINGSCODES
LISTA ÖVER FJÄRRKONTROLLKODER
NORDMENDE 265, 266 DIMENSIA 333 REALISTIC 393, 397,
ONWA 296 EMERSON 327, 334 328, 336,
TV
PANASONIC 234, 235, FISHER 393, 336 359, 362
YAMAHA 299, 292
236, 253, FUNAI 397 SAMSUNG 354, 358,
ADMIRAL 292, 293
ページ2に含まれる内容の要旨
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this 16 Be sure to read the “TROUBLESHOOTING” section manual carefully. Keep it in a safe place for future on common operating errors before concluding that reference. this unit is faulty. 2 Install this sound system in a well ventilated, cool, 17 Before moving this unit, press STANDBY/ON to set dry, clean place — away from direct sunlight, heat this un
ページ3に含まれる内容の要旨
BASIC SOUND FIELD ADDITIONAL ADVANCED OPERATION PROGRAMS INFORMATION English INTRODUCTION PREPARATION OPERATION CONTENTS INTRODUCTION SOUND FIELD PROGRAMS FEATURES............................................................. 2 SOUND FIELD PROGRAM GETTING STARTED............................................ 3 DESCRIPTIONS...............................................30 Supplied accessories .................................................. 3 For movie/video sources.............................
ページ4に含まれる内容の要旨
FEATURES FEATURES Built-in 5-channel original Yamaha digital Sophisticated AM/FM tuner power amplifier ◆ 40-station random access preset tuning ◆ Automatic preset tuning ◆ Minimum RMS output power (0.9% THD, 1 kHz, 6 Ω) Other features Front: 70 W + 70 W ◆ 96-kHz/24-bit D/A converter Center: 70 W ◆ “SET MENU” which provides you with items for Surround: 70 W + 70 W optimizing this unit for your audio/video system ◆ Screen Menu display output to your TV monitor Sound field features ◆ Proprietary
ページ5に含まれる内容の要旨
English INTRODUCTION GETTING STARTED GETTING STARTED Supplied accessories Please check that you received all of the following parts. R Re emot mote e c cont ontr ro oll Batteries (2) Indoor FM antenna (AA, R6, UM-3) (U.S.A., Canada, China, Asia STANDBY/ON SLEEP and General models) STEREO HALL JAZZ ROCK 1 2 3 4 MUSIC ENTERTAIN TV THTR MOVIE 5 6 7 8 STANDARD NIGHT EXTD SUR. STRAIGHT 9 0 +10 ENT EFFECT TV AV CODE SET REC FREQ/RDS EON s AUDIO PTY SEEK DISC SKIP MODE START AM loop antenna w e f A/B
ページ6に含まれる内容の要旨
CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front panel 4 12 3 5 6 VOLUME/SELECT TUNER DSP INPUT STANDBY SILENT CINEMA VIDEO L AUDIO R OPTICAL /ON AUTO/MAN'L PUSH-ENTER PHONES VIDEO 2 9 8 7 1 STANDBY/ON 6 VOLUME/SELECT Turns on this unit or sets it to the standby mode. When you Adjusts the volume and the tone control. Also selects turn on this unit, you will hear a click and there will be a 4 stations, sound field programs or input sources (etc.) when to 5-second delay before this unit can r
ページ7に含まれる内容の要旨
English INTRODUCTION CONTROLS AND FUNCTIONS Remote control (AMP mode) Make sure that the AMP mode is selected before starting 1 Infrared window operation. Outputs infrared control signals. Aim this window at the component you want to operate. 1 2 STANDBY/ON Switches the unit on and sets it in the STANDBY mode. STANDBY/ON 3 DSP program / Numeric buttons SLEEP Use to select sound field programs or input numbers 2 9 according to the current control area. STEREO HALL JAZZ ROCK 4 Operation buttons
ページ8に含まれる内容の要旨
EXTD SUR . CONTROLS AND FUNCTIONS D SET MENU Using the remote control Turns the SET MENU on or off. E Multi control section VOLUME/SELECT Use to select and adjust DSP program parameters or SET TUNER DSP INPUT STANDBY SILENT CINEMA VIDEO L AUDIO R OPTICAL /ON AUTO/MAN'L PUSH-ENTER PHONES VIDEO 2 MENU items. F VOLUME +/– Increases or decreases the volume level. Approximately 6 m (20 ft) 30 30 G Input selector buttons Use to select the input source and change the control area. STANDBY/ON SLEEP S
ページ9に含まれる内容の要旨
English INTRODUCTION CONTROLS AND FUNCTIONS Front panel display 1234 5 678 VCR VIDEO 1 VIDEO 2 DTV/CBL DVD/CD TUNER MATRIX DISCRETE NIGHT VOLUME MUTE SLEEP SILENT HiFi DSP PS PTY RT CT PTY HOLD EON STEREO TUNED DIGITAL AUTO MEMORY ft L L C R PCM PL mS VIRTUAL PL LFE SL SB SR dB IH G F E D C BA 0 9 J (U.K. and Europe models only) 1 Processor indicators C TUNED indicator When any of this unit’s decoders function, the respective Lights up when this unit is tuned into a station. indicator lights up.
ページ10に含まれる内容の要旨
SPEAKER SETUP SPEAKER SETUP Surround speakers (SR and SL) Speaker placement The surround speakers are used for effect and surround sounds. Place these speakers behind your listening You can enjoy this unit with the following speaker setup to position, facing slightly inwards, about 1.8 m (6 ft) above obtain the best surround sound. the floor. Subwoofer FL FR C The use of a subwoofer, such as the YAMAHA Active Servo Processing Subwoofer System, is effective not only for reinforcing bass fre
ページ11に含まれる内容の要旨
English PREPARATION SPEAKER SETUP Speaker connections 4 Return the tab to secure the wire. Be sure to connect the left channel (L), right channel (R), “+” (colored) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. CAUTION If you will use 6 ohm speakers, be sure to set this unit’s speaker impedance setting to 6 ohms before using (see “IM
ページ12に含まれる内容の要旨
SPEAKER SETUP ■ IMPEDANCE SELECTOR switch CAUTION Do not change the setting of the IMPEDANCE SELECTOR switch when the unit power is switched on, as doing so may damage the unit. If this unit fails to turn on when STANDBY/ON is pressed on either the front panel or remote control, the IMPEDANCE SELECTOR switch may not be fully slid to either position. If this is the case, slide the switch all the way to either position when this unit is in standby mode. Be sure to move this switch only when
ページ13に含まれる内容の要旨
English PREPARATION SPEAKER SETUP ■ Speaker connections Subwoofer Front Surround with speakers speakers built-in amplifier Right Left Right Left Center speaker 61 2 5 3 4 This jack is reserved for factory use. Do not connect any equipment to this jack. AM ANT GND FM ANT EXT. IN/OUT TV IN/OUT SPEAKERS FRONT CENTER SURROUND R L R L + + 75Ω UNBAL TUNER OPTICAL COAXIAL MAINS DIGITAL – – INPUT OUTPUT DVD DTV 12 3 VIDEO 1 SUBWOOFER /CD /CBL ■ FRONT terminals Connect your speaker system to these
ページ14に含まれる内容の要旨
CONNECTIONS CONNECTIONS Before connecting components Notes This unit handles digital and analog signals independently. Thus audio signals input to the digital (OPTICAL or COAXIAL) CAUTION jacks are not output to the analog VCR OUT (REC) jacks. Do not connect this unit or other components to the mains The OPTICAL jacks on this unit conform to the EIA standard. power until all connections between components are If you use a fiber optic cable that does not conform to this complete. standa
ページ15に含まれる内容の要旨
English PREPARATION CONNECTIONS Connecting other components ■ Connecting a TV Connect one end of the SCART cable to the TV/IN OUT connector on this unit and the other end to the SCART connector on your TV. ■ Connecting AV components Connect one end of the SCART cable to the EXT. IN/OUT connector on this unit and the other end to the SCART connector on your AV component. You can also daisy chain several SCART components together as shown in “Digital audio connections” (page 13). AV component T
ページ16に含まれる内容の要旨
CONNECTIONS Connecting the antennas 3 Orient the AM loop antenna for the best reception. Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal strength. Connect each antenna correctly to the designated terminals. Notes AM loop antenna Indoor FM antenna (included) (included) The AM loop antenna should be placed away from this unit and all speaker cords. The AM loop antenna should always be connected, even if an White Bla
ページ17に含まれる内容の要旨
English PREPARATION CONNECTIONS Connecting the power Turning on the power When all connections are complete, turn on the power of ■ Connecting the AC power this unit. After all other connections are complete, plug the power cord to an AC wall outlet. 1 ■ Memory back-up VOLUME/SELECT The memory back-up circuit prevents the stored data from TUNER DSP INPUT STANDBY SILENT CINEMA VIDEO L AUDIO R OPTICAL /ON AUTO/MAN'L being lost even if this unit is in the standby mode. PUSH-ENTER PHONES VIDEO 2
ページ18に含まれる内容の要旨
p p BASIC SETUP BASIC SETUP The BASIC setup feature is a useful way to set up your system quickly and with minimal effort. The BASIC setup 3 Press SET MENU. items are displayed on both the front panel of this unit and The top display appears on your video monitor. your video monitor. By using the Screen Menu on your MENU video monitor, you can easily make any necessary settings. SET MENU y If you wish to configure the unit manually using more precise adjustments, use the detailed paramet
ページ19に含まれる内容の要旨
English PREPARATION BASIC SETUP 6 Press / repeatedly to select SWFR. 9 Press / repeatedly to select YES or NO, then press ENTER. Use / to select YES or NONE. If you want to change the speaker level after you hear YES If you have a subwoofer in your system. the test tone select “NO”. NONE If you do not have a subwoofer in your YES To return to SET MENU. system. NO To enter B)SPEAKER LEVEL. 7 Press / repeatedly to select SPEAKERS. ■ Speaker level B)SPEAKER LEVEL Use this menu to compare and adj
ページ20に含まれる内容の要旨
PLAYBACK PLAYBACK Basic operations 3 Press INPUT, then rotate VOLUME/SELECT within 5 seconds to select the input source (or press an input selector button on the 1 3 3,5 remote control). VOLUME/SELECT VOLUME/SELECT TUNER DSP INPUT STANDBY SILENT CINEMA VIDEO L AUDIO R OPTICAL /ON AUTO/MAN'L PUSH-ENTER PHONES VIDEO 2 INPUT or b p a Front panel TITLE MENU STANDBY/ON SLEEP LEVEL SET MENU 1 or STEREO HALL JAZZ ROCK CH ENTER CH – + 1 2 3 4 RETURN DISPLAY MUSIC ENTERTAIN TV THTR MOVIE TEST/ 5 6 7
