ページ1に含まれる内容の要旨
Product Information
and
Owner’s Manual
MODELS 4000V, 5000V, 6500, 8500 & 10000
HEPA Air Filtration System
Keep this manual for
reference purposes
ページ2に含まれる内容の要旨
INSTALLATION To optimize the performance of your AMAIRCARE HEPA AIR FILTRATION SYSTEM, it should be installed by a pro- fessional heating and ventilation contractor who is familiar with your indoor air quality situation and the operation of other heating, ventilation and air condi- tioning equipment that you may have.
ページ3に含まれる内容の要旨
HEPA AIR FILTRATION SYSTEMS Congratulations! You will quickly realize that you have purchased the most effective air cleaning and treatment system available anywhere. It incorpo- rates “state of the art” HEPA (High Efficiency Particulate Arrestance) technology. This is the equipment that respiratory specialists recommend. Your AMAIRCARE Air Filtration System comes with a limited warranty. With proper attention to its care and maintenance, you will receive a lifetime opti- mum performance. If y
ページ4に含まれる内容の要旨
OPERATING INSRUCTIONS With proper care and maintenance, you will enjoy many years of service and dramatically improve the quality of your indoor air. The AMAIRCARE HEPA Air Filtration System is designed to operate continuously and the unit should be left in operation at all times. INSTRUCTIONS 1. The unit may be operated in a wide variety of situations. Contact your HVAC contractor for specific instructions. 2. Plug the unit into a grounded outlet (120 Volt, 60 Hz or 230 Volt 50/60 Hz). 3. Tur
ページ5に含まれる内容の要旨
FILTER REPLACEMENT INSTRUCTIONS The AMAIRCARE HEPA Air Filtration System is designed to run continuous- ly. To ensure optimal performance, please carefully follow the Product Information and Owner’s Manual Instructions. FILTER REPLACEMENT INSTRUCIONS: 1. Read these instructions completely. 2. Unplug your unit from the power supply outlet. 3. Open the front door of the unit to gain access to the filter compartment. 4. Lift the rod that holds the filter in place and remove the metal plate coverin
ページ6に含まれる内容の要旨
FILTER MEDIA There are three stages of filtration in the AMAIRCARE Air Filtration System. Air is drawn into the top of the unit through the duct opening above the front compartment and is exhausted through the duct opening above the rear fan compartment. The three stages of filtration are as follows: STAGE 1: As air enters the air treatment system it first passes through 3/16” thick activated carbon impregnated non-woven polyester pre-filter. This first stage of fil- tration removes the larger
ページ7に含まれる内容の要旨
AMERICAIR CORPORATION - PARTS LIST The following are the item numbers for the various filter replacement components needed to ensure long-term optimum performance from your AMAIRCARE HEPA Air Filtration System. To order, please contact your Dealer directly or call the fac- tory to obtain the name of the Dealer nearest to your location. PART NUMBER DESCRIPTION 90005406 16” HEPA Filter Cartridge (100 sq. ft.) 4000V / 6500 / 8500 90005506 16”HEPA Filter Cartridge (125 sq. ft.) 5000V / 1000 9100
ページ8に含まれる内容の要旨
SPECIFICATIONS The Amaircare Models 4000V, 5000V, 6500, 8500, and 10000 HEPA Air Filtration Systems are designed for indoor air quality improvement situations where high capacity is required. Following are the specifications for these five models: MODEL 4000V HEPA AIR FILTRATION SYSTEM Capacity: Air Flow - 50 cubic feet - 300 cubic feet/max. Maximum hourly flow - 18,000 cubic feet Recommended service area - 700 sq. ft. Maximum Power Consumption:* 120 watts (1 motor) MODEL 5000V HEPA AIR FILTRAT
