ページ1に含まれる内容の要旨
R
Model SR8000 User Guide
AV Surround Receiver
ページ2に含まれる内容の要旨
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi-cient magnitude to constitute a risk of electric shock to persons. The exclamation point wit
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and 11. Grounding or Polarization-This video product is equipped with a safety standards. There are, however, some installation and operation polarized alternating-current line plug (a plug having one blade precautions which you should be particularly aware of. wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you
ページ4に含まれる内容の要旨
19. Servicing-Do not attempt to service this video product yourself 21. Replacement Parts-When replacement parts are required, be as opening or removing covers may expose you to dangerous sure the service technician has used replacement parts specified voltage or other hazards. Refer all servicing to qualified service by the manufacturer or have the same characteristics as the personnel. original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 20. Damage Req
ページ5に含まれる内容の要旨
DFHL AV BC E G I KO R WX MULTI AUDIO VIDEO S-VIDEO 6CH INPUT DIGITAL IN REMOTE L R SPEAKERS L R L R MINIMUM 8OHMS FRONT TV IN CD DIG–6 CENTER SURR. IN LD OUT AM DIG–5 8OHMS TAPE GND CTRL DVD DIG–4 1 OUT L DC CONTROL SUB SURR. CENTER WOOFER IN CTRL IN 2 DIG–3 8OHMS FM CD-R (75 Ω ) VCR1 /MD CTRL R 1 AC OUTLETS OUT OUT DIG–2 120V 60HZ) ANTENNA OUT L R SWITCHED CTRL 120W 1A 2 IN OUT DIG–1 DSS/ FRONT VCR2 L L R AUDIO FRONT OUT OUT IN DIG. OUT UNSWITCHED COAX 120W 1A SURR. 8OHMS R VIDE
ページ6に含まれる内容の要旨
ENGLISH TABLE OF CONTENTS INTRODUCTION.............................................................................................................................................................. 3 DESCRIPTION................................................................................................................................................................. 3 FEATURES .....................................................................................................................
ページ7に含まれる内容の要旨
INTRODUCTION FEATURES • Dolby Digital and DTS surround sound decoding, plus Dolby Pro Thank you for purchasing the Marantz SR8000 DTS/Dolby Digital Logic decoding and a variety of additional surround modes. Surround receiver. This remarkable component has been engineered to provide you with • 96 kHz/ 24 bit decoding for highest possible fidelity and many years of home theater enjoyment. bandwidth, and high-resolution playback of 96 kHz/ 24 bit PCM Please take a few minutes to read this manual th
ページ8に含まれる内容の要旨
ENGLISH o MULTI (Multi Room) button FRONT PANEL FEATURES (SEE Press this button to switch the unit to multi room mode. “MULTI PAGE 1.) ROOM” appears in the display. !0 SLEEP button q POWER switch and STANDBY indicator Set the sleep timer function with this button . When this switch is pressed once, the unit turns ON and display appears on the display panel. When pressed again, the unit turns OFF and the STANDBY indicator lights. !1 DISPLAY OFF button When the STANDBY indicator lights, the unit i
ページ9に含まれる内容の要旨
J TV MONI. (VIDEO/S-VIDEO) output jacks REAR PANEL CONNECTIONS Connect the TV MONI jack to your TV’s video input (VIDEO IN) jack. (SEE PAGE 1.) You can connect your video equipment with S-VIDEO jacks if possible, or the composite (VIDEO) jacks. All connections to the rear panel should be made with the entire You must use the same type of connection from your video player into system powered off. the receiver, and out of the receiver into your TV. To avoid errors, it is advisable to connect one c
ページ10に含まれる内容の要旨
ENGLISH V SPEAKER terminals FRONT Left & Right speakers output terminals Connect to the front left & right speakers. CENTER speaker output terminals Connect to the center speaker. SURROUND Left & Right speakers output terminals Connect to the surround (rear) left & right speakers. W AC OUTLETS Connect the power cables of components such as a DVD and CD player to these outlets. Both SWITCHED and UNSWITCHED outlets are provided. The one marked SWITCHED provides power only when the SR8000 is turned
ページ11に含まれる内容の要旨
REMOTE CONTROL BUS CONNECTIONS Controlling the power ON/OFF of a power amplifier connected to This unit is equipped with a remote control function. the SR8000 through Marantz remote control By connecting this unit’s remote control jacks to a Marantz CD player 1. If you connect the MA500 power amplifier to the SR8000, set the or tape deck equipped with remote control (RC-5) jacks, it allows Bus System Selector switch of the MA500 to “System 2”. system remote control to operate. Now the MA500 can
ページ12に含まれる内容の要旨
ENGLISH REMOTE CONTROL UNIT RC-18SR AMP This chapter describes the functions which need to control the MODE3 7 LVL+ Increases channel level volume SR8000. See page 18 and following pages to refer other function of 8 LVL- decreases channel level volume the RC-18SR. After pressing the CH+ button, use the LVL+ and LVL- buttons to adjust the volume level of each speaker channel. v POWER ON and OFF PROCESSOR 1 VOL+ increases external decoder’s volume These two buttons are use for turning on or off S
ページ13に含まれる内容の要旨
CH VOL 1 2 3 OK 4 5 6 7 8 9 OSD GUIDE MUTE M 0 C CH VOL 1 2 3 OK 4 5 6 7 8 9 OSD GUIDE MUTE M 0 C POWER SOURCE C NE ACR E LO M O MOD M ACRO L EA R N I R NC G2 0R 0E 0 M MOK TII E CO NT ROL M ACRO USE NAME ON/ OFF 1 3 2 4 D1 LOW D5 D2 D6 D3 D7 D4 D8 1 2 3 4 DSS MD TV LD DVD VCR TUNER CD TAPE AUX AMP OL V 1 2 3 4 5 6 OK 7 8 9 M 0 C ON OFF EARN CH OSD GUIDE MUTE L 3. Receiving the remote control codes OPERATION OF REMOTE CONTROL UNIT The RC-18SR can learn most of the remote control codes from vario
ページ14に含まれる内容の要旨
ENGLISH SET-UP After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM The SR8000 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote handset. The settings made with these buttons are also shown in the on-screen display. OSD MAIN MENU SURROUND MODE SYSTEM SETUP 1/3 SPEAKER SETUP 1/3 SPKR SIZE CHANNEL LEVEL CONTROL SYSTEM SETU
ページ15に含まれる内容の要旨
SYSTEM SETUP 2/3 (SELECTING THE DIGITAL INPUT) OSD MAIN MENU Six digital inputs can be assigned for the desired source. 1. Press the AMP button. Use this menu to determine which source is connected to which 2. Press any one of the cursor buttons ( , , , and OK buttons) input. to display the “MAIN MENU” of the on-screen display menu. Example; Choose a desired item in the contents with or button, and When the digital output of a DVD player is connected to Digital 4 press th
ページ16に含まれる内容の要旨
ENGLISH FRONT -L/R : Select the type of front speakers with or button. SPEAKERS SETUP CENTER : Select the type of center speaker with or button. The home theater system you already have installed should function SURR-L/R : Select the type of surround speakers with or provided that there are left, center and right front speakers, left and button. right rear/surround speakers and a subwoofer. For best results we SUBWOOFER: Select the subwoofer speaker yes or none with or recommend that all
ページ17に含まれる内容の要旨
SURROUND MODE MULTI ROOM SETUP SOURCE DIRECT : Switch the source direct ON or OFF with or MULTI ROOM : To switch on the Multi-room output. button. This bypasses the surround processing VIDEO : Select the video source of the Multi-room and crossover for the main speakers (front left output. and right will be full range and the subwoofer will AUDIO : Select the audio source of the Multi-room be ON) output. Note: Surround mode cannot be changed in VOLUME : Select whether the
ページ18に含まれる内容の要旨
ENGLISH 5. Each time the tuner finds a station, the scanning will pause and BASIC OPERATION the station will be played for five seconds. During this time, the following operations are possible: LISTENING TO THE TUNER 1) The band can be changed using the BAND button on the remote. MANUAL TUNING 2) The mode can be changed using the (FM) MODE button !7 . 1. To select the tuner as the source, press the TUNER button t on 6. If no button is pressed during this period, the current frequency is the fron
ページ19に含まれる内容の要旨
STATION NAME PRESET OTHER FUNCTIONS The station name preset function allows the name of each preset channel to be entered using alphanumeric characters. The Station SETTING THE SLEEP TIMER Name button is valid only in the tuner mode. Before station name preset operation, store stations with the preset memory operation. Set the sleep timer while the power is turned on. 1. Press the MEMORY button !4 on the front panel or M (MEMO) 1. Turn the power ON and press the SLEEP button !0 or D5 on button
ページ20に含まれる内容の要旨
ENGLISH MULTI ROOM SELECTOR ON SCREEN DISPLAY The Multi Room Selector is a function which allows you to listen to the INFOMATION same or a different source in a room other than the room in which the The on-screen display, which can be activated by the Main unit or SR8000 is located. To use this function, a multi room remote unit and remote, appears on the TV screen to show the current setting status remote control signal receiver available from your Marantz dealer are of the SR8000. necessary. T
