ページ1に含まれる内容の要旨
DVD MULTI
TAPE
DVD
®
AUDIO/VIDEO CONTROL RECEIVER
AV&'
RX-60VGD
SOUND POWER
CONTROL TV VCR AUDIO
VCD
CONTROLVCD-DISC CD-DISC
DAP MODE 3D-PHONIC SURROUND
1 2 3
EFFECT DELAY TEST
4 5 6
SEA MODE SEA PRESET MENU
7/P 8 9
MASTER VOLUME
– REAR•R + RETURN/ENTER DESIGNED BY JVC JAPAN
+10 0 10 RX-60V AUDIO/VIDEO CONTROL RECEIVER
TUNER/BAND PRESET SEA SOURCE SURROUND ADJUST SETTING
CENTER REAR TV CH –+
(L) VOLUME
VCD ONE TOUCH TV/VIDEO
OPERATION
MEMORY
CD
ONE TOUCH OPERATION
VCR DVD MULTI
MUTIN
ページ2に含まれる内容の要旨
Warnings, Cautions and Others /& Caution –– POWER switch! Disconnect the mains plug to shut the power off completely. The &' * POWER switch in any position does not disconnect the mains line. &' ** The power can be remote controlled. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. &' * 2. Do not expose this appliance to rain or moisture. 1.&' * 2.
ページ3に含まれる内容の要旨
Caution: Proper Ventilation &' To avoide risk of electric shock and fire and to protect from damage. &' * Locate the apparatus as follows: &' Front: No obstructions open spacing. &' Sides: No obstructions in 10 cm from the sides. Top: No obstructions in 10 cm from the top. 10&' Back: No obstructions in 15 cm from the back 10&' Bottom: No obstructions, place on the level surface. 15&' In addition, maintain th
ページ4に含まれる内容の要旨
Table of Contents Parts Identification...................................................................................... 2 Getting Started........................................................................................... 3 Before Installation................................................................................................................................................................... 3 Checking the Supplied Accessories .............................................
ページ5に含まれる内容の要旨
DVD MULTI TAPE DVD Parts Identification Become familiar with the buttons and controls on the receiver before use. 14 3 5 6 8 9 0 - 2 7 DESIGNED BY JVC JAPAN MASTER VOLUME RX-60V AUDIO/VIDEO CONTROL RECEIVER TUNER/BAND PRESET SEA SOURCE SURROUND ADJUST SETTING –+ MEMORY ONE TOUCH OPERATION DVD MULTI STANDBY PHONES SPEAKERS 12 POWER _ON ÑOFF = ! @ # ~ Refer to the pages in parentheses for details. POWER SOUND CONTROL TV VCR AUDIO + $ VCD Front Panel CONTROL VCD-DISC CD-DISC Remote Control Á
ページ6に含まれる内容の要旨
Getting Started This section explains how to connect stereo components and speakers to the receiver, and how to connect the power supply. Before Installation General • Be sure your hands are dry. • Turn the power off to all components. • Read the instructions supplied with the components you are going to connect. Locations • Install the receiver in a location that is level and protected from moisture. • The temperature around the receiver must be between –5˚ and 35˚ C. • Make sure there is good
ページ7に含まれる内容の要旨
Connecting the FM and AM Antennas FM Antenna Connections 1 23 FM Antenna ANTENNA Extend the FM antenna horizontally. Note: 4 Outside FM Antenna Cable FM If reception is poor, connect the 75 FM outside antenna. GND Before attaching a 75 Ω coaxial cable (the kind with a round wire 10 mm 1 2 3 GND going to an outside antenna), AM disconnect the supplied FM wire LOOP AM 20 mm antenna. EXT How to strip the 75 Ω coaxial cable and connect it to the FM terminals 1. Strip back the outside covering of
ページ8に含まれる内容の要旨
Getting Started Connecting the Speakers You can connect the following speakers: • Two sets of front speakers to produce normal stereo sound • One set of rear speakers to enjoy the surround effect • One center speaker to produce more effective surround effect (to make human voices outstanding) • One subwoofer to enhance the bass For each speaker (except for subwoofer), connect one end of the speaker signal cable (not supplied) to the speaker terminal on the rear panel and the other end to the spe
ページ9に含まれる内容の要旨
Connecting the rear and center speakers Notes: Connect the rear speakers to the REAR SPEAKERS terminals and the center speaker to • When you connect rear the CENTER SPEAKER terminals. speakers, make sure that both left and right speakers are connected; otherwise, no Left rear Right rear sound will come out of the rear Center CENTER speaker speaker speakers. SPEAKER speaker RIGHT LEFT • You can register the center speaker size after you finish its REAR connection. If you register it, SPEAKERS you
ページ10に含まれる内容の要旨
Getting Started Connecting Audio/Video Components CAUTION: You can connect the following components to the receiver using cables with RCA pin If you connect a sound-enhancing plugs. device such as a graphic equalizer between the source components Audio Components Video Components and this receiver, the sound output • Turntable • TV through this receiver may be • CD player • VCR distorted. • Cassette deck • DVD player Audio component connections If a ground cable is provided for your turntable, c
ページ11に含まれる内容の要旨
DVD player connection Notes • When you play back a disc on the DVD player in stereo (or the audio output setting of the DVD player is mixed to two front channels): • When connecting an audio/ video component (ex.: Video VIDEO DVD DVD CD player) with "karaoke” — FRONT CENTER REAR MONITOR LEFT singing along — function, use OUT L the audio signal attenuating OUT IN DVD player RIGHT R (REC) (PLAY) cord supplied with this VCR receiver. If not, sound may be SUBWOOFER OUT IN TV PHONO CD AUDIO TAPE (RE
ページ12に含まれる内容の要旨
Getting started Connecting the Power Cord Notes: Before plugging the receiver into an AC outlet, make sure that all connections have • A small amount of power is been made. always consumed even in standby mode. To switch off the When the power cord is connected, the STANDBY lamp above the POWER button power completely, unplug the lights up. power cord from the AC outlet. • If the power cord is unplugged Keep the power cord away from the connecting cables for the TV, VCR, and antenna. (or a power
ページ13に含まれる内容の要旨
DVD MULTI TAPE DVD Basic Operations The following operations are commonly used when you play any sound source. Turning the Power On and Off On the front panel: To turn on the power, press POWER. The STANDBY lamp goes off. The name of the current source (or station frequency) appears on the display. L R MUTE TUNED SLEEP SEA 3D-PHONIC STANDBY AUTO STEREO PRO LOGIC 3CH LOGIC HALL LOUDNESS VOLUME POWER DAP MHz kHz CH- Current source name appears Current volume level is shown here To turn off
ページ14に含まれる内容の要旨
Basic Operations Adjusting the Volume CAUTION: MASTER VOLUME On the front panel: Always set the volume to the minimum before starting any To increase the volume, turn MASTER VOLUME –+ source. If the volume is set at its clockwise. high level, the sudden blast of To decrease the volume, turn it counterclockwise. sound energy can permanently damage your hearing and/or ruin When you turn MASTER VOLUME rapidly, the volume your speakers. level also changes rapidly. When you turn MASTER VOLUME slowly
ページ15に含まれる内容の要旨
Recording a Source Note: You can record any source playing through the receiver to a cassette deck connected to The following sound modes the TAPE jacks and the VCR connected to the VCR jacks at the same time. cannot affect the recording. While recording, you can listen to the selected sound source at whatever sound level • Preset SEA modes: (see page you like, without affecting the sound levels of the recording. 20) • 3D-PHONIC modes: (see page 23) • DAP modes: (see page 25) • DVD MULTI playbac
ページ16に含まれる内容の要旨
Basic Settings Some of the following settings are required after connecting and positioning your speakers in your listening room, while others will make operations easier. Adjusting the Front Speaker Output Balance If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output balance. On the front panel only: SETTING 1. Press SETTING so that the Control %%%%% / ÞÞÞÞÞ / @@@@@ / ##### buttons work for adjusting the balance. The lamp above the button l
ページ17に含まれる内容の要旨
Using the Sleep Timer Using the Sleep Timer, you can fall asleep to music and know the receiver will turn off by itself rather than play all night. On the front panel only: SETTING 1. Press SETTING so that the Control %%%%% / ÞÞÞÞÞ / @@@@@ / ##### buttons work for setting the Sleep Timer. The lamp above the button lights up. 2. Press Control %%%%% / ÞÞÞÞÞ until “SLEEP” appears on the display. 3. Press Control @@@@@ / ##### to set the shut-off time. The SLEEP indicator lights up on the display. E
ページ18に含まれる内容の要旨
Basic Settings Selecting the Center Speaker Size You can register the information about the center speaker after all connections are Note: completed. This “center speaker size” setting If you do this registration first, you do not have to adjust the center speaker mode when is so related to the center mode you want to activate the surround sound. setting for surround modes that changing this setting affects and changes the center mode to a On the front panel only: relevant mode, and vice versa.
ページ19に含まれる内容の要旨
One Touch Operation This receiver can memorize the optimum sound settings for each playing source. About the One Touch Operation JVC’s One Touch Operation function is used to assign and store different sound settings Notes: for each different playing source. By using this function, you do not have to change the • If the source is TUNER/BAND, settings every time you change the source. The stored settings for the newly selected the One Touch Operation source are automatically recalled. function me
ページ20に含まれる内容の要旨
Receiving Radio Broadcasts You can browse through all the stations or use the preset function to go immediately to a particular station. Tuning in Stations Manually On the front panel only: TUNER/BAND 1. Press TUNER/BAND. The lamp above the button lights up. Notes: Each time you press the button, the band alternates • When you hold down Control @ between FM and AM. / # in step 3, the frequency keeps changing until you press %% ÞÞ 2. Press Control %%% / ÞÞÞ until “–TUNING+” appears on Control @ /
