Crate Amplifiers GX-140Dの取扱説明書

ページ1に含まれる内容の要旨

ページ2に含まれる内容の要旨

ページ3に含まれる内容の要旨

ページ4に含まれる内容の要旨

GX-140D Amplifier THE DSP SECTION: PROGRAMMING THE OTHER PRESETS: You can program six different effects into your GX-140D: 1. Select the Clean Channel (the green led will be lit). two for the Clean Channel and four for the Overdrive Channel. Follow these simple instructions to program 2. Turn the Chorus/Expander ON (button IN) 3. Turn the DSP Mode knob to the desired effect. the presets: 4. Repeat for the Overdrive Channel with the Shape PROGRAMMING A PRESET: and Chorus/Expander OFF, Shape and C

ページ5に含まれる内容の要旨

ページ6に含まれる内容の要旨

GX-140D Amplifier GX-140D TECHNICAL SPECIFICATIONS Output Power Rating 70 watts RMS @ 5% THD 8 ohms load 120VAC 100 watts RMS @ 5% THD 4 ohms load 120VAC Speaker Size and Rating Crate Custom Design 12” with 1-3/4” voice coil Power Handling: 70 Watts RMS Maximum Input Signal Level Accepted 8 volts, peak-to-peak Total System Gain Overdrive Channel: 108dB @ 1kHz Clean Channel: 56dB @ 1kHz Input Impedance 470k ohms Overdrive Channel: Low Control: 10dB Range @ 80Hz Shape Control: Proprietary Circu