ページ1に含まれる内容の要旨
Reference 3220
Three Channel Amplifier
OWNER’S MANUAL
B & K Components Ltd.
13006 rev 0005
ページ2に含まれる内容の要旨
B&K Components, Ltd., 2100 Old Union Road, Buffalo, New York 14227 13006 rev 0005
ページ3に含まれる内容の要旨
Table of contents Safety Precautions Page 2 Purpose and function Page 3 Design and construction Page 3 Features Page 3 Rear panel view Page 4 Rear panel description Page 4 - 5 Control muting Page 5 - 6 Level controls Page 6 Outputs Page 7 Inputs Page 7 - 8 System installation Page 8 Making the connection Page 9 Troubleshooting Page 10 Care and cleaning Page 10 Specifications Page 11 Warranty page 12 Accessories included: Manual and Power cord Page 1 13006 rev 0005
ページ4に含まれる内容の要旨
SAFETY PRECAUTIONS PLEASE READ BEFORE INSTALLING WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be sufficient magnitude to constitute a risk of electric shock to you. The exclamation point within an equilateral triangle is intended to alert the user of the presence of
ページ5に含まれる内容の要旨
The Reference 3220's purpose and function The Reference 3220 is a compact, very efficient, three channel power amplifier. It is designed to be used in all types of audio or audio/video systems. Design and construction The Reference 3220 utilizes high quality electronic circuitry to achieve an environment wherein a detailed, transparent, and highly musical sound can be realized. The high quality parts complement include state-of-the-art solid state devices, 1% metal film resistors, computer g
ページ6に含まれる内容の要旨
Rear Panel View 1. AC fuse holder 4. Inputs 2. AC Input receptacle 5. Level controls 3. Speaker outputs 6. Amplifier control muting input/output NOTE: THE BALANCED INPUTS ARE NOT AVAILABLE ON THE Reference 3220 AMPLIFIER Rear panel description 1. AC fuse holder - Holds the AC Line fuse. This fuse is an 12 Amp / 250 Volt Slow Blow fuse. Replace with same type and value fuse only. 2. AC Input receptacle - For attaching the supplied AC power cord to the amplifier. 3. Speaker outputs - Fo
ページ7に含まれる内容の要旨
5. Level controls - For adjusting the input level of each channel into the amplifier. There are level controls on the back of the amplifier. One level control for each channel. Explained further on page 6. 6. Amplifier control muting input/output - To provide remote switching of mute on/off of the amplifier. Explained further below. Control muting A control is provided on each Reference 3220 amplifier to allow remote switching of mute on/off. The preamplifier’s control output, such as is
ページ8に含まれる内容の要旨
If the control function is desired, each unit in the system must remain connected at all times and the control must be enabled. To enable the control function, the CTRL ENABLE button must be out for each controllable amplifier in the system. For more information on the amplifiers output status under various control conditions, refer to the table below. @ CTRL IN Button position Output status @ CTRL OUT Signal OUT Sound Signal Signal IN Sound Signal No Signal OUT Mute No Signal No Signal IN So
ページ9に含まれる内容の要旨
Outputs Five way binding posts are provided. One pair for each channel. They are designed to accept a banana-type plug or spade lug connector (shown below) and are color coded for easy identification. The red (+) post should always be connected to the speakers (+) jack. The black (-) post should always be connected to the speakers (-) jack. Spade connector Banana jack Here is a typical amplifier setup: )LJXUH' Inputs Unbalanced - RCA type connectors accept line input from the prea
ページ10に含まれる内容の要旨
Here is a typical input setup System installation There will most likely be a number of cables involved in the installation of your home entertainment system. Pre-planning is essential in order to maximize system efficiency. We recommend the following as a means of helping you reach that goal: Make a diagram of your proposed system by laying out the relative location of each component in the system. Then lay out the proposed cable runs between them. Number each cable and record its length
ページ11に含まれる内容の要旨
Making the connection Before doing anything, ensure that the power switch on the amplifier’s front panel is in the ‘off’ position. Again, it is recommended that you locate a separate AC power outlet for the amplifier, one that is not shared by any other audio component in the system or any other house hold component. This will eliminate the possibility of the amplifier ‘modulating’ the power being supplied to the component and compromising the signal originating from that component. Locate
ページ12に含まれる内容の要旨
Note: When turning equipment ‘off’, the amplifier should always be turned off first, then the preamplifier. When turning equipment ‘on’, the preamplifier should always be turned on first, then the amplifier. Before turning anything on, ensure the preamplifier is at a low volume level. Troubleshooting PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION No sound 1. Power cord not plugged in. 1. Reconnect power cord. (‘on’ LED not illuminated) 2. Power off at AC source. 2. Check AC switch or fuse. 3. AC pow
ページ13に含まれる内容の要旨
Reference 3220 SPECIFICATIONS Power rating: 8 ohms 220 watts @ 1 kHz 4 ohms 325 watts @ 1 kHz Frequency response 5 Hz - 45 kHz Input sensitivity 1.4 Volts THD (S+N) 0.09 % @ 1 kHz Input impedance 33.2 k ohms Damping factor 400 Current (peak to peak) 60 Amps Slew rate 14 V / )sec Dynamic headroom 1.1 dB S/N (A-weighted) 95 dB Voltage gain 28 Line voltage 120/220/240 VAC switchable Dimensions (O.A.) 17"(w) X 15.5"(d) X 5.75"(h) Weight 43 lbs Power consumption 875 watts
ページ14に含まれる内容の要旨
Limited Warranty B&K Components Ltd., referred to herein as B&K, warrants your B&K equipment against all defects in material and workmanship for a period of five years from the date of purchase. This warranty applies only to the original purchaser and only to equipment in normal residential use and service. Defective equipment must be returned to B&K, prepaid, accompanied by sufficient payment to cover the cost of return shipping and handling, and will be repaired or replaced at the discretion
ページ15に含まれる内容の要旨
B&K Components, Ltd., 2100 Old Union Road, Buffalo, New York 14227 13006 rev 0005
ページ16に含まれる内容の要旨
B&K Components, Ltd. 2100 Old Union Road Buffalo, New York 14227 716-656-0023 www.bkcomp.com 13006 rev 0005
