ページ1に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS
MANUAL PART NUMBER: 400-0016-004
DA1506RT
2-IN, 6-OUT VGA
DISTRIBUTION AMPLIFIER
USER’S GUIDE
ページ2に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS................ 2 GENERAL..........................................................2 RACK-MOUNTING SAFETY GUIDELINES........2 HANDLING ........................................................2 CLEANING.........................................................2 FCC NOTICE .....................................................2 ABOUT YOUR DA1506RT ....................................... 3 TECHNICAL SPECIFICATIONS...........
ページ3に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS • Do not pull any cables that are attached to the PRECAUTIONS / SAFETY WARNINGS 1 DA1506RT. Please read this manual carefully before using your DA1506RT Distribution Amplifier. Keep this manual • If the DA1506RT is not used for an extended handy for future reference. These safety period, disconnect the power cord. instructions are to ensure the long life of your 1.4 CLEANING DA1506RT and to prevent fire and shock hazards. Please read them carefully and heed all warni
ページ4に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS ABOUT YOUR DA1506RT 2 MECHANICAL DA1506RT Material 0.1” Al DA1506RT 2-In, 6-Out Distribution Amplifier (DA) Finish Gray Height (inches) 1.75 in (44mm) The DA1506RT is a 2-In, 6-Out VGA through Width (inches) 8.50 in (216mm) UXGA distribution amplifier (DA). It is designed to connect 1 of 2 computer video sources to as many Depth (inches) 4.50 in (114mm) as 6 monitors, displays, and projectors. Weight (pounds) 2.0 lb (0.91 kg) The rear panel of the DA1506RT has 1 comput
ページ5に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS PRODUCT DESCRIPTION 4 FRONT VIEW INPUT1 INPUT2 REAR VIEW OUTPUTS 1-6 POWER APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP DA1506RT 400-0016-004 4
ページ6に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS DIAGRAM 2: INTERNAL VIEW 2-IN 6-OUT VGA-XGA DA OUT 1 PLUG AND PLAY AUTO SWITCH OUT 2 FRONT OUT 3 15-PIN HD 15-PIN HD OUT 4 BACK OUT 5 PLUG AND PLAY OUT 6 SIGNAL POWER DETECT POWER PS 9V, 0.5A 400-0016-004 5
ページ7に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS DIAGRAM 3: CONNECTOR PINOUTS INPUT CONNECTORS OUTPUT CONNECTORS Pin No. PIN ASSIGNMENTS Pin No. PIN ASSIGNMENTS 1 Red 1 Red 2 Green 2 Green 3 Blue 3 Blue 4 Ground 4 No Connection 5 Ground 5 Ground 6 Ground 6 Ground 7 Ground 7 Ground 8 Ground 8 Ground 9 VESA +5V IN 9 +5V 10 Ground 10 Ground 11 Ground 11 No Connection 12 VESA SDA 12 No Connection 13 Horizontal Sync 13 Horizontal Sync 14 Vertical Sync 14 Vertical Sync 15 VESA SCL 15 No Connection Table 4. The DA1506RT Input
ページ8に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS INSTALLING YOUR DA1506RT 6 TROUBLESHOOTING GUIDE 8 Step 1. Plug the power adapter into an AC We have carefully tested and found no problems in receptacle. the supplied DA1506RT; however, we would like to offer suggestions for the following: Step 2. Connect the power to the unit. The power indicator LEDs on the front and back • Please make sure that the input amplitude of panels will turn on and red. This indicates analog signal is less than 1.5 Vp-p. that the unit
