ページ1に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS
MANUAL PART NUMBER: 400-0002-003
PRODUCT REVISION: 1
DA1206RM
1–IN, 2-OUT RGBS
DISTRIBUTION AMPLIFIER
USER’S GUIDE
ページ2に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS INTRODUCTION Page Thank you for purchasing the Video Distribution Amplifier. We are sure you will find it ............... 2 reliable and simple to use. ................................ .......................... 2 Superior performance for the right price, backed by .............. 2 solid technical and customer support is what ................................ .................. 2 Altinex has to offer. ................................ ......................... 2 The produc
ページ3に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS • Do not place heavy objects on top of the 1 . If the is to be mounted, to a table or wall, use only Altinex made Please read this manual carefully before using your mounting accessories (Rack Mount Shelf Distribution Amplifier. Keep this , Rack Mount Ears ) and manual handy for future reference. These safety instructions are to ensure the long life of your DA1206RM and to prevent fire and shock hazard. • To turn off the main power, be sure to remove Please read them ca
ページ4に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS user will be required to correct the interference 3 at his own expense. FEATURES/DESCRIPTION DA1206RM • Any changes or modifications to the unit not GENERAL expressly approved by Altinex, Inc. could void 1 the user’s authority to operate the equipment. 4-BNC Female Outputs 3 2 The Distribution Amplifier is designed High resolution RGBS, to allow the connection of a single computer or other video source to as many as six scan-rate Component, S-Video compatible display dev
ページ5に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS Vertical 47-180 Hz Power Internal Power Supply 90-140V/200-240V Table 3. Electrical 4 4 DESCRIPTION OF DA1206RM DA1206RM
ページ6に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS 4.3 VIDEO LEVEL SWITCH The VIDEO LEVEL Switch can be set to either SYNC POLARITY switch is located on the the standard 0.7V output or to 1.0V output. back panel of the unit. It has two switching When the switch is set in the 1.0V output positions, one designated (+) and the other (-). position, this provides approximately a 35% By setting the sync polarity switch to (+) the increase in the video signal level. This can be signal is processed as unchanged and the sync used
ページ7に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS 7 6 The settings of the Distribution Amplifier can be adjusted using Input Termination, Step 1. Make sure that the proper power supply Video Level, and Sync Level switches as described is being used with the unit. The use of in Section no. 4. There are no other adjustments an incorrect power supply can result in necessary to operate the unit. The will equipment damage not covered by operate successfully as long as cables are warranty. attached properly and other techni
ページ8に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS have when the approximately a 35% 9 Video Level increase in the video signal switch is set in level. This can be used in No: Question the 1.0V installations where cable 1 What is a A Distribution Amplifier is a output runs exceed 150 feet. It is Distribution device that allows you to position? not recommended that this connect a single video switch be set in the 1.0V source to multiple display position for shorter cable lengths as the increased or projectors used in level
ページ9に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS If your product is out of warranty and needs 11 service, contact the Altinex Sales Department for an RMA (Return Material Authorization). Products returned without an RMA number may experience a delay in service. The service Altinex warrants that its products and cables are charges will be quoted to you before the actual free from defects in materials under normal use repairs are done. and service. This warranty is limited to repairing at company’s factory any part or par
