ページ1に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS
DA1406WM
1-IN, 6-OUT MAC
USER’S GUIDE
DISTRIBUTION AMPLIFIER
PRODUCT REVISION: 0
MANUAL PART NUMBER: 400-0018-003
ページ2に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS Page Thank you for purchasing the Distribution Amplifier. We are sure you will find it a ............... 2 ................................ .......................... 2 Superior performance for the right price backed by INSTALLATION ................................ .................. 2 solid technical and customer support is what we ................................ ......................... 2 have to offer. FCC / CE NOTICE ................................ ............. 2
ページ3に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS PRECAUTIONS / SAFETY WARNINGS 1 • Do not place heavy objects on top of the . If the Please read this manual carefully before using your to a table or wall, use only Altinex made Distribution Amplifier. Keep this mounting accessories like brackets ( manual handy for future reference. These safety and instructions are to ensure the long life of your • To turn off the main power, be sure to remove and to prevent fire and shock hazard. the cord from the power outlet. The
ページ4に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS • Any changes or modifications to the unit not MECHANICAL DA1406WM expressly approved by Altinex, Inc. could void Material the user’s authority to operate the equipment. Gray Lexan 2 The is a 1-in 6-out MAC distribution amplifier designed to connect a single computer video source to as many as six scan rate compatible displays. The will pass an T ° 10 ° C-35 °C analog video signal up to 1.5 V p-p. Using AGC T ° 50 °C sync circuitry, the converts incoming 90 % All input
ページ5に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS DESCRIPTION OF DA1406WM 4 PIN No. Input signals on 15-pin D female connector Using female 15-pin D (MAC-type) connectors 1 Ground on all input and output connectors, the 2 Red can be used with readily available 3 MAC-type cables. If desired, the input and/or 4 Switch 1 (Grounded when switch is ON outputs of the can be easily 5 Green adapted to 5-BNC connectors to allow it to be 6 Ground used with RGsB, RGBS, or RGBHV signal types 7 Switch 2 (Grounded when switch is ON a
ページ6に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS PIN No. Input signals on 15-pin D female connector Some Video cards require the proper sense ID 12 pins to determine the boot up mode. Sense pins 13 Ground are usually present on MAC video cards. When 14 Ground distribution amplifiers are used, the local monitor 15 (monitor connecting directly to the computer) is Table 4. The Input pin-out no longer available. To insure the proper boot up of the computer, the has dip- PIN No. Output signals on 15-pin D female connector
ページ7に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS OPERATION 7 6 The settings of the Distribution Amplifier can be adjusted using Boot switches as Step 1. Make sure that the power input is set to described in Section no. 4. There are no other the proper AC voltage in your country. adjustments necessary to operate the unit. The An incorrect setting can result in will operate successfully as long as equipment damage not covered by cables are attached properly and other warranty. If the power input voltage needs to be chan
ページ8に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS ACCESSORIES 8 FREQUENTLY ASKED QUESTIONS 9 No: Answer Model No. TABLE MOUNT BRACKET 1 2 RACK MOUNTING ACCESSORIES on the outputs of DA1293RM the DA1294RM MAC MALE TO MALE CABLES CB3403MR RGBHV or CB3406MR CB3415MR format CB3425MR CB3450MR CB3475MR CB34100MR format CB34150MR MAC MALE TO FEMALE CABLES 3 What If I CB3603MR 6 outputs of CB3606MR the CB3615MR ? CB3625MR buffered outputs. CB3650MR 3 Buffered output means that CB3675MR CB36100MR buffered from the input signal. T
ページ9に含まれる内容の要旨
DISTRIBUTION AMPLIFIERS TROUBLESHOOTING GUIDE 10 We have carefully tested and have found no you have ordered and that this product fulfills problems in the supplied your need. In the unlikely event that an Altinex however, we would like to offer the following product needs to be returned please follow the : • Check to insure the power input is set to proper Altinex will accept product returns for a period of AC voltage. That the correct voltage is visible 30 days from authorized Altinex dealer
