ページ1に含まれる内容の要旨
PTA1
2X15 Watt Stereo Power Amplifier
www.pyleaudio.com
ページ2に含まれる内容の要旨
Your New Pyle Pro Amplifier gives you the power and versatility you need in a professional sound system. The amplifier's wide frequency response makes it suitable for amplifying music or vocal program material. It can be used in meeting halls, house, restaurant, schools, stores, or for paging systems. PTA1 features a PAGER-MIXING function that offers the flexibility of using it at paging or musical events. Please read this manual thoroughly before you attempt to set up and use the amplifie
ページ3に含まれる内容の要旨
Features and controls 1. Power ON LED Indicator -Lights to indicate power is turned on. 2. 1/4"PHONE JACK -Accepts headphones with 1/4" plug. 3. MIC VOLUME CONTROL -Lets you adjust the volume of connected MIC to the proper setting. 4. MUSIC VOLUME CONTROL -Lets you adjust the volume of music output from the sources of AUX OR CD. It doesn't affect the volume from MIC. 5. BALANCE CONTROL -Lets you adjust the sound balance between the left and right amplifier output. 6.AUX/CD INPUT SELECTOR -Le
ページ4に含まれる内容の要旨
music will be existed at the same time. It is similar like playing at KARAOKE events. 8. 1/4" MIC INPUT JACK -Lets you connect a microphone with a 1/4" plug. 9. AUX/CD RCA INPUT -Lets you connect most high-level audio sources such as CD player, tape deck, tuner, camcorder or VCR. 10. SPEAKER L/R TERMINALS -Lets you easily connect speaker wires directly to the amplifier.Speaker impedance can range from 8 to 4 ohms for the general stereo output. please see the next instruction of using four
ページ5に含まれる内容の要旨
CARING FOR YOUR PYLE PRO AMPLIFIER Your Pyle Pro Amplifier is an example of superior design and craftsmanship. The following suggestions will help you care for your amplifier so you can enjoy years of use : *Keep the amplifier dry. If it gets wet, wipe immediately. *Use the amplifier only in well-ventilated installations. *Handle the amplifier away from dust and dirt. *Wipe occasionally with a damp cloth to keep it looking new. Do not use harsh chemical, solvents or detergents! IMPORTANT Rep
ページ6に含まれる内容の要旨
Connecting two 4-8 ohm speakers in stereo mode. Connecting four 8 ohm speakers in stereo mode. TROUBLE SHOOTING No power The fuse might be blown. Check the amplifier's fuse and replace it if necessary. No sound Sound source or speakers Check all connections. not connected properly. MUSIC volume control set Adjust the volume control to minimum. to desired setting. The speaker's wire might be Make sure all connected the wrong impedance. speakers have the same impedance rating. The amplifier mi
ページ7に含まれる内容の要旨
Limited warranty All PYLE PRO products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for one (1) year from the date of purchase. This warranty is limited to the original retall purchaser of the amplifier. Should the unitfall due to factory defects in material or workmanship,your unit well be repaired or replaced at the sole discretion of PYLE. To obtain warranty service, you must first call our
ページ8に含まれる内容の要旨
SPECIFICATIONS Output power, 2 channels driven 4-OHM, 1 KHz, 1% THD. 3Wx2 4-OHM, 1 KHz, 10% THD. 4Wx2 Peak Power 15Wx2 Total Harmonic Distortion, 1 KHz Rated Power 0.3% Input Sensitivity, 1 KHz ,4-ohm Rated Power AUX 150mV CD 150mV MIC 2. 5mV Signal to Noise Ratio, 1 KHz, 4-ohm Rated Power AUX 75dB CD 75dB MIC 65dB Frequency Response, 1KHz 1W, +/-3dB (8-OHM) 30Hz - 20KHz Power Requirement 120V AC 60Hz or 230V AC 50Hz Dimensions 190x70x137mm (WxHxD) 6
