ページ1に含まれる内容の要旨
INTEGRATED CIRCUITS
DATA SHEET
TDA6106Q
Video output amplifier
1997 Mar 03
Product specification
File under Integrated Circuits, IC02
ページ2に含まれる内容の要旨
Philips Semiconductors Product specification Video output amplifier TDA6106Q FEATURES GENERAL DESCRIPTION • No external heatsink required The TDA6106Q is a monolithic video output amplifier with a 6 MHz bandwidth and is contained in a 9-lead plastic • Black current measurement output for Automatic Black DIL-bent-SIL medium power package. The device uses current Stabilization (ABS) high-voltage DMOS technology and is intended to drive • Internal 2.5 V reference circuit the cathode of a CRT. To obta
ページ3に含まれる内容の要旨
Philips Semiconductors Product specification Video output amplifier TDA6106Q PINNING SYMBOL PIN DESCRIPTION handbook, halfpage n.c. 1 not connected n.c. 1 n.c. 2 not connected n.c. 2 V 3 inverting input voltage in V 3 in GND 4 ground, substrate GND 4 I 5 black current measurement output om I 5 TDA6106Q om V 6 supply voltage DD V 6 n.c. 7 not connected DD n.c. 7 V 8 cathode output voltage oc V 9 feedback output voltage of V 8 oc V 9 of MBG342 Fig.2 Pin configuration. LIMITING VALUES In accordance
ページ4に含まれる内容の要旨
Philips Semiconductors Product specification Video output amplifier TDA6106Q HANDLING Inputs and outputs are protected against electrostatic discharge in normal handling. However, to be totally safe, it is desirable to take normal precautions appropriate to handling MOS devices (see “Handling MOS Devices” ). QUALITY SPECIFICATION Quality specification “SNW-FQ-611 part E” is applicable, except for ESD Human body model see Chapter “Limiting values”, and can be found in the “Quality reference handboo
ページ5に含まれる内容の要旨
Philips Semiconductors Product specification Video output amplifier TDA6106Q SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT t cathode output propagation delay V = 50 to 150 V square 38 49 60 ns pd oc time 50% input to 50% output wave; f < 1 MHz; t =t = 40 ns; rin fin see Figs 3 and 4 t cathode output rise time 10% output V = 50 to 150 V square 62 74 87 ns r oc to 90% output wave; f < 1 MHz; t = 40 ns; see Fig.4 fin t cathode output fall time 90% output to V = 150 to 50 V square 62 74 87 ns f oc 10%
ページ6に含まれる内容の要旨
Philips Semiconductors Product specification Video output amplifier TDA6106Q x V i 0 t x t s overshoot (in %) 151 150 140 V 149 oc 100 60 50 t t r MGA974 t pd Fig.3 Output voltage (pin 8 rising edge) as a function of AC input signal. 1997 Mar 03 6
ページ7に含まれる内容の要旨
Philips Semiconductors Product specification Video output amplifier TDA6106Q x V i 0 t x t s 150 140 V oc 100 overshoot (in %) 51 60 50 49 t t f MGA975 t pd Fig.4 Output voltage (pin 8 falling edge) as a function of AC input signal. V to GND must be decoupled: Flashover protection DD 1. With a capacitor larger than 20 nF with good HF The TDA6106Q incorporates a protection diode against behaviour (e.g. foil). This capacitor must be placed as CRT flashover discharges that clamp the cathode output c
ページ8に含まれる内容の要旨
Philips Semiconductors Product specification Video output amplifier TDA6106Q TEST AND APPLICATION INFORMATION C par handbook, full pagewidth R fb C1 R10 100 kΩ 200 V 22 nF R9 V in C2 866 Ω C6 100 nF 22 μF C n 560 pF 6 9 R1
3 TDA6106Q8 0.98 mA 50 Ω C8 R3 45 20 MΩ 6.8 pF C7 probe A 3.2 pF C9 R2 V 1 MΩ om 136 pF 4 V GND MBG344 C = 150 fF. par 1 Fig.5 Test circuit with feedback factor ⁄ . 116 The dynamic dissipation equals: Dissipation P = V×() C++ C C ×fV× ×b With respect to dissipation, distinctio
ページ9に含まれる内容の要旨
Philips Semiconductors Product specification Video output amplifier TDA6106Q INTERNAL PIN CONFIGURATION handbook, full pagewidth V GND DD 46 from
TDA6106Q input
circuit esd esd esd 9 V V of bias from
reference
circuit from
3 input
V in circuit esd flash
prot. esd flash
from
prot. 8 pin 9 V oc 5 I om from
pin 9 6.8 V esd from
reference
to BCS-circuit
circuit output MBG345 Fig.6 Internal pin configuration. 1997 Mar 03 9
ページ10に含まれる内容の要旨
Philips Semiconductors Product specification Video output amplifier TDA6106Q PACKAGE OUTLINE DBS9MPF: plastic DIL-bent-SIL medium power package with fin; 9 leads SOT111-1 D D 1 q A 2 P P 1 Q A 3 q 2 q 1 A A 4 E pin 1 index c L 19 e e b Z 2 b w M 2 θ b 1 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) A (1) 2 (1) (1) Z UNIT A A Abc bb D D E eL e PP qqq w Q θ 3 4 12 12 1 1 2 max. max. o 18.5 8.7 15.5 1.40 0.67 1.40 0.48 21.8 21.4 6.48 3.9 2.75 3.4 1.75 15.1 65 4.4 5.9 mm 3.7 2.54 2.54 0.
ページ11に含まれる内容の要旨
Philips Semiconductors Product specification Video output amplifier TDA6106Q SOLDERING The device may be mounted up to the seating plane, but the temperature of the plastic body must not exceed the Introduction specified maximum storage temperature (T ). If the stg max printed-circuit board has been pre-heated, forced cooling There is no soldering method that is ideal for all IC may be necessary immediately after soldering to keep the packages. Wave soldering is often preferred when temperature wi
ページ12に含まれる内容の要旨
Philips Semiconductors – a worldwide company Argentina: see South America Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB, Tel. +31 40 27 82785, Fax. +31 40 27 88399 Australia: 34 Waterloo Road, NORTH RYDE, NSW 2113, Tel. +61 2 9805 4455, Fax. +61 2 9805 4466 New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND, Tel. +64 9 849 4160, Fax. +64 9 849 7811 Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213, Tel. +43 1 60 101, Fax. +43 1 60 101 1210 Norway: Box 1, Manglerud 0612, OSLO, Tel