Electro-Voice P2000の取扱説明書

ページ1に含まれる内容の要旨

P2000
TM
Precision Series
Power Amplifier
• 560 watts per channel
at 8 ohms, 900 watts per
channel at 4 ohms, 1,200
watts per channel at 2 ohms
®
• Neutrik Speakon output
connectors allow use of
heavy-gauge speaker wire
for low-loss connections
• Extremely low (<0.01%)
dynamic distortion ensures
excellent sound quality
• Three-year parts-and-labor
warranty
SPECIFICATIONS Voltage Gain, 1 kHz, Any Mode, Constant- Load Protection:
1
Conditions: Gain Option: Start-up/shutdown transients; dc fault;
1

ページ2に含まれる内容の要旨

P2000 SPECIFICATION GRAPHICS FIGURE 1 — P2000 Dimensions FIGURE 2 — P2000 Intermodulation Distortion (SMPTE 60 Hz/7 kHz) vs. Power FIGURE 3 — P2000 Front and Rear Panel

ページ3に含まれる内容の要旨

Operating Voltage: devices are protected against damage from The Electro-Voice P2000 is the choice for seri- 120 V, 60 Hz ac reverse feeding of electrical energy (back EMF) ous, professional amplification applications Power Consumption (both channels and are switched on via relays to avoid tran- which require optimum sound quality, speaker 1 operating in dual mode, / power), sients which could damage speakers. protection, and the highest level of construction 8 4 Ohms: quality and long-term reli

ページ4に含まれる内容の要旨

other than as specified in the product data cluding, without limitation, injury to persons or The power amplifier shall be the Electro-Voice sheet or owner’s manual; (d) malfunction re- property or loss of use. Some states do not P2000. sulting from misuse or abuse of the product; or allow the exclusion or limitation of incidental or UNIFORM LIMITED WARRANTY (e) malfunction occurring at any time after re- consequential damages so the above limitation Electro-Voice products are guaranteed against