ページ1に含まれる内容の要旨
ModelAMP-592C
200WattStereoAmplifier
Owner's Owner's Owner's
Owner's Owner's
Manual Manual Manual
Manual Manual
128-5721 128-5721 128-5721
128-5721 128-5721
Released 2-1-00.
SHT. 1 OF 12 SHT. 1 OF 12 SHT. 1 OF 12 SHT. 1 OF 12 SHT. 1 OF 12
ページ2に含まれる内容の要旨
INDEX INDEX INDEX INDEX INDEX Specifications ...........................................................1 Precautions ..............................................................2 Installation Instructions .............................................3 Wiring Instructions ............................................4 - 5 Input Wiring Diagram ............................................6 Output Wiring Diagram .........................................7 Operation ...............................
ページ3に含まれる内容の要旨
HIGH PERFORMANCE STEREO AMPLIFIER HIGH PERFORMANCE STEREO AMPLIFIER HIGH PERFORMANCE STEREO AMPLIFIER HIGH PERFORMANCE STEREO AMPLIFIER HIGH PERFORMANCE STEREO AMPLIFIER This power amplifier has been designed to provide high quality performance with a minimum of maintenance. However, it's performance will only be as good as the HELP! care and quality of components with which it is installed. We therefore advise that you read these instructions very carefully to familiarize yourself with the pr
ページ4に含まれる内容の要旨
PRECAUTIONS PRECAUTIONS PRECAUTIONS PRECAUTIONS PRECAUTIONS 1. Although this unit is designed with built-in self-protection circuits, there may be a possibility of damage if it is not wired correctly. Please follow the wiring instructions carefully for the type of system being used. + + 2. The last lead to be connected is the wire to the positive (+ +) + terminal of the battery. Connect this wire only after having completed and checked all other connections to the amplifier. 3. By nature of it
ページ5に含まれる内容の要旨
INSTALLATION DIAGRAM INSTALLATION DIAGRAM INSTALLATION DIAGRAM INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION DIAGRAM INSTALLATION DIAGRAM INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 1. Select a mounting area where the amplifier will have sufficient air circulation for proper cooling. SELF-TAPPINGSCREW Inadequate air circulation will cause the temperature of the amplifier to rise and will trigger the thermal protection mode. 2. Place the amplif
ページ6に含まれる内容の要旨
WIRING INSTRUCTIONS WIRING INSTRUCTIONS WIRING INSTRUCTIONS WIRING INSTRUCTIONS WIRING INSTRUCTIONS The power and speaker wire connections for this amplifier are made via screw tightened terminal blocks. Loosen the screw for the connection to be made and fully insert the wire (strip 1/2" of insulation from the end) into the respective screw on the side panel (crimp-on "U" terminals are provided to simplify wiring and we recommend their use.) Tighten the screw down to secure the wire. 1. Power
ページ7に含まれる内容の要旨
WIRING INSTRUCTIONS WIRING INSTRUCTIONS WIRING INSTRUCTIONS WIRING INSTRUCTIONS WIRING INSTRUCTIONS 4. Speaker Connections 4. Speaker Connections 4. Speaker Connections 4. Speaker Connections 4. Speaker Connections Depending on the type and number of speakers used with the amplifier, wire them to the speaker terminals as per the appropriate wiring diagram. For most applications, #18 gauge wire should be used for the speaker leads but in no case thinner than #20 gauge. For leads in excess of 10
ページ8に含まれる内容の要旨
USE THIS USE THIS USE THIS USE THIS USE THIS INPUT INPUT INPUT INPUT INPUT WIRING WITH WIRING WITH WIRING WITH WIRING WITH WIRING WITH INPUT WIRING DIAGRAM OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT WIRING ON PAGE 7 WIRING ON PAGE 7 WIRING ON PAGE 7 WIRING ON PAGE 7 WIRING ON PAGE 7 HIGH-LEVEL HIGH-LEVEL HIGH-LEVEL HIGH-LEVEL HIGH-LEVEL LOW-LEVEL LOW-LEVEL LOW-LEVEL LOW-LEVEL LOW-LEVEL CAR STEREO CAR STEREO CAR STEREO CAR STEREO CAR STEREO (SPEAKER) OUTPUTS (SPEAKER) OUTPUTS (SPEAKER) OUTPU
ページ9に含まれる内容の要旨
WARNING! OUTPUT WIRING DIAGRAM l THIS AMPLIFIER IS DESIGNED FOR USE WITH 2 SPEAKERS l NEVER COMBINE (BRIDGE) OUTPUTS FOR USE WITH 1 SPEAKER. l NEVER GROUND NEGATIVE SPEAKER LEADS TO CHASSIS GROUND. EXISTING SCREW OR BOLT EXISTING SCREW OR BOLT EXISTING SCREW OR BOLT EXISTING SCREW OR BOLT EXISTING SCREW OR BOLT l FAILURE TO WIRE CORRECTLY MAY CAUSE DAMAGE TO THE AMPLIFIER. CLEAN PAINT, RUST, DIRT CLEAN PAINT, RUST, DIRT CLEAN PAINT, RUST, DIRT CLEAN PAINT, RUST, DIRT CLEAN PAINT, RUST, DIRT OR G
ページ10に含まれる内容の要旨
200 200 200 200 200 OPERATION 6 6 6 5 5 5 6 6 5 5 1 1 1 1 1 4 4 4 4 4 3 3 3 3 3 2 2 2 2 2 Level (Gain) Control Level (Gain) Control Level (Gain) Control Level (Gain) Control Level (Gain) Control After initial set-up, the amplifier should not require any The amplifier is capable of operating from sources further adjustment unless there is a change in the car supplying a wide range of input levels. The Level control stereo or speaker system with which it is used. should initially be set
ページ11に含まれる内容の要旨
minimum setting, or the output level increases too fast LPF Crossover Frequency Control LPF Crossover Frequency Control LPF Crossover Frequency Control LPF Crossover Frequency Control LPF Crossover Frequency Control with a small rotation of the volume control, adjust the This Control selects the crossover frequency when the Level control to decrease the output from the system. Filter Selector is in the "LPF" setting. Adjust it to the Once the correct setting is found, this c
ページ12に含まれる内容の要旨
90 DA 90 DA 90 DA 90 DA 90 DAY/12 MONTH LIMITED W Y/12 MONTH LIMITED W Y/12 MONTH LIMITED W Y/12 MONTH LIMITED W Y/12 MONTH LIMITED WARRANTY ARRANTY ARRANTY ARRANTY ARRANTY Applies to car stereo power amplifiers, equalizers and accessories. AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original
