ページ1に含まれる内容の要旨
English
G R
Speaker System
NS-8HX
OWNER’S MANUAL
Thank you for selecting this YAMAHA NS-8HX speaker system.
PRECAUTIONS
Read this before using the speakers.
● Placing the speakers on the same shelf or rack as the
turntable can result in feedback.
● To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference. ● Never put a hand or a foreign object into the port located
on the front of the speaker as this might cause personal
● Install the spe
ページ2に含まれる内容の要旨
ATTACHING THE SPIKES PLACING THE SPEAKERS Using as 2ch stereo speakers Better stereo images will be obtained when the speakers are slightly angled in towards the listeners. Nut x 4 Spike x 4 When setting up the speakers on a thick carpet, use the spikes to increase stability and improve sound quality. Attach the spikes at four points on the speaker properly by following the procedure below. Using as main speakers in a multi channel system Position the speakers on both sides of the TV. The po
ページ3に含まれる内容の要旨
English CONNECTIONS TO YOUR AMPLIFIER This speaker system is capable of standard connections and bi-wired connections. Before making connections, make sure that the amplifier is switched off. CONNECTIONS Leave the short • Connect the screw-type input terminals at the rear of the bars in place when speakers to the speaker output terminals of the amplifier connecting. (or receiver) with the speaker cable. • Connect the (+) terminals on the amplifier (or receiver) Short bar
ページ4に含まれる内容の要旨
Bi-Wired Connections Remove the short This speaker system is capable of bi-wired Tweeter/Mid-range bars before terminals connections. To connect the speaker to the output connecting. terminals of the amplifier (or receiver), two pairs of cables for each of woofer and tweeter/mid- range are used instead of standard connections. This type of connection decreases the modulation distortion caused by electric resistance of the cables and driving current of the speakers. + Conse
ページ5に含まれる内容の要旨
English ATTACHING THE FRONT COVER SPECIFICATIONS The speaker and the front cover are packed separately. Type .......................................3-way 4-speaker bass reflex To attach the cover, line up the six pegs on the speaker speaker system with the six corresponding holes on the inside surface of Magnetic shielding type the cover and push gently. Driver .......................................20 cm (8”) cone woofer x 2 To remove the cover, hold on to both sides and slowly pull Wave guid
ページ6に含まれる内容の要旨
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAH