ページ1に含まれる内容の要旨
DVD VIDEO PLAYER &
VIDEO CASSETTE RECORDER
SD-K530SU
OWNER’S MANUAL
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
©2004 Toshiba Corporation
This device does not tape-record copy protected DVD Video Discs.
ページ2に含まれる内容の要旨
Safety Precautions CAUTION: The apparatus should not be exposed to water CAUTION (dripping or splashing) and no objects filled with liquids, such RISK OF ELECTRIC SHOCK as vases, should be placed on the apparatus. DO NOT OPEN FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this CAUTION: TO REDUCE THE RISK equipment may cause harmful interference unless the modifi- OF ELECTRIC SHOCK cations are expressly approved in the instruction manual. Th
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND 15. Attachments INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE Only use attachments/accessories specified by the manufacturer. MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR 16. Accessories FUTURE REFERENCE. Use only with the cart, stand, tripod, bracket, or This set has been designed and manufactured to assure personal safety. table specified by the manufacturer or sold with Improper use can result in electric shock or
ページ4に含まれる内容の要旨
Table of Contents 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 29 Introduction Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2 Marker Search . . . . . . . . . . . . . . . . . . . . . . . 30 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3 Special DVD Features . . . . . . . . . . . . . . . . . . . . 30 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Checking the
ページ5に含まれる内容の要旨
Before Use Disc-related terms Playable Discs Title (DVD only) The main film content or accompanying feature content DVD or music album. (8 cm/12 cm disc) Each title is assigned a title reference number enabling Video CD (VCD) you to locate it easily. (8 cm / 12 cm disc) Chapter (DVD only) Audio CD Sections of a picture or a musical piece that are smaller (8 cm/12 cm disc) than titles. A title is composed of one or several chap- ters. Each chapter is assigned a chapter number to In addition, t
ページ6に含まれる内容の要旨
Before Use (Continued) Cleaning discs Precautions Fingerprints and dust on the disc can cause poor pic- Handling the unit ture quality and sound distortion. Before playing, clean When shipping the unit the disc with a clean cloth. Wipe the disc from the cen- The original shipping carton and packing materials ter out. come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting the unit The picture and sound of a nearby TV or radio may be distor
ページ7に含まれる内容の要旨
Front Panel Disc Tray (DVD deck) EJECT Insert a disc here. Ejects the tape in the VCR deck. Cassette Compartment (VCR deck) Insert a video cassette here. Remote Sensor Point the DVD+VCR remote control here. Display window Shows the current status of the DVD+VCR. OPEN/CLOSE Opens or closes the disc tray. DVD/VCR indicator Indicates the active deck. SKIP (./> ) - Skip to beginning of current chapter or track, press twice in quick successions to go to pre- vious chapter or track. - Skip to next
ページ8に含まれる内容の要旨
Display Window The DVD deck is selected. A disc is in the DVD deck. (Lights when a disc is in the DVD deck and Flashes when no disc.) Indicates when the Progressive scan is active. Indicates repeat mode. DVD+VCR is in timer recording or a timer recording is programmed.(VCR part only) A cassette is in the VCR deck. The VCR deck is selected. [P] DVD VCR REC PM TV Lights when TV mode is active (See page 22.) Indicates PM time. (AM is not displayed.) DVD+VCR is Recording. (VCR part only) Indicates t
ページ9に含まれる内容の要旨
Rear Panel VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, Another VCR). DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video and audio inputs. COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) (DVD OUT) Connect to a TV with Y Pb Pr inputs. AUDIO OUT (Left/Right) (DVD OUT) Connect to a TV, amplifier, receiver, or stereo system. AC Power Cord Plug into the power source. DIGITAL AUDIO OUT (OPTICAL) (DVD OUT)
ページ10に含まれる内容の要旨
Remote Control POWER EJECT, OPEN/CLOSE - Ejects the tape in the VCR deck. Switches DVD+VCR ON and OFF. - Opens and closes the disc tray. INPUT SELECT PROGRAM To select the VCR deck’s source (Tuner, Accesses or removes Program menu. LINE 1, or LINE 2). COUNT RESET, CLEAR CLK/CNT, DISPLAY - Resets tape counter to M 0:00:00 Accesses On-Screen display. - Removes a track number on the Switches among the clock, tape counter program menu or a mark on the and tape remaining modes on the display. MARKE
ページ11に含まれる内容の要旨
Connections Without Cable Box Tips If your cable wire is connected to your TV without a converter Depending on your TV and other equipment you wish to or descrambler box, unscrew the wire from your TV and attach it to the ANT.IN jack on the DVD+VCR. Use the supplied round connect, there are various ways you could connect the DVD+VCR. Use connections described on pages 11-13. coaxial cable to connect between the DVD+VCR’s RF.OUT jack and the 75 ohm antenna input jack on the TV. With this Please
ページ12に含まれる内容の要旨
Connections (Continued) Basic TV Connections Optional, Preferred TV Connections Make one of the following connections, depending on Note the capabilities of your existing equipment. You can ONLY watch and listen to DVD playback RF coaxial connection through the connections shown below. Connect the RF.OUT jack on the DVD+VCR to the S-Video connection antenna in jack on the TV using the 75-ohm Coaxial Cable supplied (R). Connect the S-VIDEO OUT jack on the DVD+VCR 1 1 to the S-Video in jack on t
ページ13に含まれる内容の要旨
Connections (Continued) Optional, Preferred TV Connections Rear of DVD+VCR Note You can ONLY listen to DVD playback using COAXIAL (X), OPTICAL (O) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 12.) Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround A1 A2 X Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the DVD+VCR to the audio left and right in jacks on
ページ14に含まれる内容の要旨
Before Operation - VCR Part Easy Information On-Screen Display (OSD) If the Extended Data Service (XDS) signals are provid- Some of these functions will be displayed every time ed along with normal TV signal in your area or during the VCR is operated. playback of a tape recorded with Extended Data Service (XDS) signals, the station ID, program title and ❶❷ ❸ ❹ ❺ program details are shown on the TV screen. When viewing a channel with Extended Data Service PLAY HI-FI CH 4 (XDS) signals, press ENT
ページ15に含まれる内容の要旨
Before Operation - VCR Part (Continued) Setting the VCR Setup Menu Channel Selection This DVD+VCR is equipped with a frequency Press VCR MENU and the MAIN menu will synthesized tuner capable of receiving up to 181 1 1 appear. channels. These include VHF channels 2-13, UHF chan- Press v/V to select the SETUP menu, then press nels 14-69 and CATV channels 1-125. 2 2 ENTER. Preparation: The SETUP menu will appear. Connect the DVD+VCR to the desired type of antenna or cable TV system, as shown i
ページ16に含まれる内容の要旨
Before Operation - VCR Part (Continued) Setting the Clock Note There are cases where the TV station does not send or sends The DVD+VCR gives you two ways to set the time and wrong date and/or time information and the DVD+VCR sets the date: the Auto Clock Feature or manually. The Auto incorrect time. Clock Feature enables the DVD+VCR to set up the clock If this happens we recommend that you set the clock manually. when the DVD+VCR is turned off. Manual Clock Set Things to know before starting T
ページ17に含まれる内容の要旨
Before Operation - DVD Part Use b/B to change the setting of an item. 3 3 The number buttons can also be used for setting Caution: numbers (e.g., title number). For some functions, Before using the remote control, press the DVD/VCR press ENTER to execute the setting. button to select the device to be operated. Then press DVD/VCR SELECT button to select DVD mode. Temporary Feedback Field Icons General Explanation TITLE Repeat Title This manual gives the basic instructions for operating CHAPT Rep
ページ18に含まれる内容の要旨
Before Operation - DVD Part (Continued) Picture Initial Settings You can set your own Personal Preferences on this unit. TV Aspect DVD 4:3 Letterbox: Select when a standard 4:3 TV is General Operation connected. Displays theatrical images with masking bars above and below the picture. Press SETUP. 4:3 Panscan: Select when a conventional TV set is 1 1 The setup menu appears. connected. The video material formatted in the Pan & Original Disc Audio Scan style is played back in that style (Both si
ページ19に含まれる内容の要旨
Before Operation - DVD Part (Continued) Sound Dynamic Range Control (DRC) DVD With the DVD format, you can hear a program’s sound- Digital Audio Output track in the most accurate and realistic presentation Each DVD disc has a variety of audio output options. possible, thanks to digital audio technology. However, Set the player’s Digital Audio Output according to the you may wish to compress the dynamic range of the type of audio system you use. audio output (the difference between the loudest s
ページ20に含まれる内容の要旨
Before Operation - DVD Part (Continued) Parental Control Area Code DVD Enter the code of a country/area whose standards were Rating DVD used to rate the DVD video disc, referring to the list Movies on DVDs may contain scenes not suitable for (See “Country/Area Code List”, page 43). children. Therefore, discs may contain Parental Control Code Set information that applies to the complete disc or to Disc Audio Disc Subtitle U S certain scenes on the disc. These scenes are rated Disc Menu from 1 to
