Philips SX9100の取扱説明書

ページ1に含まれる内容の要旨

Problems Possible Cause / Solution
User Manual
• Unplug the power connector wait 30 seconds then plug it back in.
1. Recorder not working
AudioImage™ SX9100 Rev 01
make sure the connector is plugged in securely. Be sure to
or stopped working
observe the Green LED light turns ON.
Digital Audio System Player/Recorder
• Be sure MX9000 card is inserted all the way into it’s slot securely
• Insert the blank MX9000 “True Audio Card” into the slot as shown (be sure
• Check audio cord;

ページ2に含まれる内容の要旨

during spoken words, when the recordings are too soft the volume on the audio source is too low. Adjust the audio level on your PC or other audio Package Content source accordingly, re-record if needed. SX9100 Digital Player/Recorder unit Power Adapter 110v AC to 9V AC 100 ma Audio cord 3.5mm to 3.5mm 12 feet long Adjusting Recording Volume “Y” patch connector (3.5mm plug to 2 x 3.5mmjacks) 1inch The SX9100 is factory calibrated for recording at a mid level audio from a PC RCA to RCA audio co